The Experience in Designing and Evaluating the High Performance Cluster Netuno

This paper presents the Netuno supercomputer, a large-scale cluster installed at Federal University of Rio de Janeiro in Brazil. A detailed performance evaluation of Netuno is presented, depicting its computational and I/O performance, as well as the results for two real-world applications. Since building a high- performance cluster for running a wide range of applications is a non-trivial task, some lessons learned from assembling and operating this cluster, such as the excellent performance of the OpenMPI library, and the relevance of employing an efficient parallel file system over the traditional NFS system, can be useful knowledge to support the design of new systems. Currently, Netuno is being heavily used to run large scale simulations in the areas of ocean modeling, meteorology, engineering, physics, and geophysics.     

Synthesis and characterization of Pt‐CMK‐3 hybrid nanocomposite for hydrogen storage

The nanometric carbon CMK‐3 modified with Pt was synthesized and applied as a reservoir for hydrogen uptake. We found that the newly synthesized hybrid composites exhibited significantly enhanced H₂ storage. The approach that we have followed includes synthesis of nanostructures with the experimental study of its adsorption capacity and storage properties. In summary, we have shown that CMK‐3 ordered porous carbon modified with Pt nanoclusters is a promising material for hydrogen uptake. The samples were characterized by X‐ray diffraction, N₂ isotherms, X‐ray photoelectron spectra and transmission electron microscopy. The nanoparticles of Pt (~1.7 nm) incorporated onto the nanostructured carbon CMK‐3 showed higher hydrogen uptake at low and high pressures (3.3 wt% of H₂ sorption at 10 bar and 77 K) than CMK‐3. Copyright © 2014 John Wiley & Sons, Ltd.     

Liquid Chromatography–Tandem Mass Spectrometry Multiclass Method for 46 Antibiotics Residues in Milk and Meat: Development and Validation

A screening method for analysis of 46 antibiotics residues, belonging to different classes, such as tetracyclines, sulfonamides, fluoroquinolones, β-lactams, cephalosporins, macrolides and other minority groups was developed and validated for application in bovine milk and bovine, swine, poultry, equine, fish and shrimp meat samples. Sample preparation consists in solvent extraction followed by clean up with C18 bulk and low temperature purification. Instrumental analysis was performed using liquid chromatography coupled to tandem mass spectrometry system. Chromatographic separation was achieved using a C18 column. Mobile phase was composed by methanol and water. The method was validated according to Commission Decision 2002/657/EC criteria. Validation parameters such as specificity and detection capability (CCβ) were determined and considered suitable to the established criteria. Values of CCβ ranged from 1.0 to 50.0 μg L^?1 or μg Kg^?1, depending on the compound and the matrix. The proposed method has been applied into Brazilian National Residue Control Plan since 2013 for the determination of antibiotic residues. A total of 3833 samples were analyzed until the current date and 13 samples showed positive results with concentrations above the permitted. The method is fast, easy and adequate for high throughput analysis in routine laboratories.     

Blends and clay nanocomposites of cellulose acetate and poly(epichlorohydrin)

The aim of this work was to investigate cellulose acetate/poly(epichlorohydrin) (CA/PEPi) blends and cellulose acetate/poly(epichlorohydrin)/organically modified montmorillonite clay nanocomposites (CA/PEPi/MMTO) prepared by melt processing in a twin-screw extruder. The combination of an elastomer and clay in the cellulose acetate matrix was an attempt made to reach a balance between toughness and strength properties. The blend and nanocomposite structure, morphology and thermal properties were investigated by small angle X-ray scattering, transmission electron microscopy and dynamical mechanical analysis. The results showed immiscibility of the polymer components for all the CA/PEPi blend composition range investigated. In the case of the nanocomposites, the results indicated a significant polymer intercalation in the clay gallery as well as the exfoliation of the silicate layers. Moreover, the organoclay was present in the CA phase, but some of the organoclay migrated to the CA/PEPi interface and tended to surround the PEPi phase. The addition of PEPi elastomer to cellulose acetate showed a significant increase in the blend impact resistance. However the combination of PEPi and MMTO did not in fact produce a good stiffness versus toughness balance.     

Electricity,hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. On the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn’t exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments.     

Evaluation of two round baling systems for harvesting understory biomass

The objective of this study was to evaluate the performance and to estimate costs of two round baling systems for harvesting understory biomass. One system was a cutter-shredder-baler prototype (Bio-baler). The other system required two successive operations. The first operation was cutting and shredding with a Supertrak tractor equipped with a Fecon mulcher head. The second operation was baling with a Claas baler. The machines were evaluated in three different pine stands on the Osceola National Forest in Florida, United States. Data collection included time study, fuel consumption and bale measurements. Material was collected from a sample of bales for heat and moisture content determination. On the most representative site (Site 2), the Bio-baler recovered 8.05 green t ha⁻¹ while the mulcher and the Claas baler recovered 9.75 green t ha⁻¹ (43 and 52 percent of original understory biomass, respectively). Productivity was 0.30 ha h⁻¹ for the Bio-baler and 0.51 ha h⁻¹ for the Claas baler. Density of the bales was 321 green kg m⁻³ for the Bio-baler and 373 green kg m⁻³ for the Claas baler. Average net heat content was 6263 MJ bale⁻¹ for the Bio-baler and 6695 MJ bale⁻¹ for the Claas baler with biomass containing 38 percent of moisture content on a wet basis. Cost per unit area was less with the Bio-baler (US$320.91 ha⁻¹) than with the mulcher-baler system (US$336.62-US$596.77 ha⁻¹).