Recovery of polyphenols from camu-camu (Myrciaria dubia H.B.K. McVaugh) depulping residue by cloud point extraction

In this study the potential of cloud point extraction formed by a non-ionic surfactant was used in order to separate polyphenols from industrial residues of camu-camu. The effects of operational conditions of the cloud point extraction (CPE) on the polyphenol recovery and volumetric ratio were investigated. The results showed a maximum recovery of 95.71% that was obtained using 7.0 wt% Triton X-114, native pH (3.25), and 80 wt% polyphenol extract at 30 °C. The use of cloud point extraction was successful to recover the polyphenols from agroindustrial residue since it is a simple as well as of low-cost technique.     

Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh

Hybrid electrospun nanofibers of polycaprolactone (PCL)/gelatin are considered as drug-delivery systems for increasing the treatment efficacy in superficial (skin) wounds. Continuous delivery of therapeutic agents, skin extracellular matrix similarity, management of wound exudate, and antimicrobial barrier effect are the major advantages of electrospun nanofibers in skin applications. Additionally, combining the favorable properties of PCL and gelatin, regarding their biocompatibility, biodegradability and mechanical performance have been revealed promising parameters to be considered for blend in hybrid structures. However, the usual optimization protocol of nanofibers’ production in electrospinning is based on the observation of one-variable-at-time being this methodology expensive and time-consuming. Therefore, in this research work, a statistical model based on four input variables namely, the flow rate, the needle-working distance, the applied voltage, and the ratio of PCL in the solution, is developed to predict the behavior of nanofibers. The performance of nanofibers is monitored by measurements of fiber's diameter, mesh's thickness, and mesh's permeability. Overall, the model showed to be statistically significant (p-value < 0.05) and an independent analysis validated the predicted response for optimal condition. Finally, a delivery study is performed to evaluate the electrospun mesh performance as a drug carrier.     

Pharmacokinetic Parameters of HIV-1 Protease Inhibitors

Since the beginning of the HIV epidemic, research has been carried out to control the virus. Understanding the mechanisms of replication has given access to the various classes of drugs that over time have transformed AIDS into a manageable chronic disease. The class of protease inhibitors (PIs) gained notice in anti-retroviral therapy, once it was found that peptidomimetic molecules act by blocking the active catalytic center of the aspartic protease, which is directly related to HIV maturation. However, mutations in enzymatic internal residues are the biggest issue for these drugs, because a small change in biochemical interaction can generate resistance. Low plasma concentrations of PIs favor viral natural selection; high concentrations can inhibit even partially resistant enzymes. Food-drug/drug-drug interactions can decrease the bioavailability of PIs and are related to many side effects. Therefore, this review summarizes the pharmacokinetic properties of current PIs, the changes when pharmacological boosters are used and also lists the major mutations to help understanding of how long the continuous treatment can ensure a low viral load in patients.     

Microstructure and flexural strength of the Y:TZP/BG composite

The addition of bioactive glasses to a Y:TZP matrix represents a feasible alternative to provide bioactivity to this material and optimize osseointegration. This work evaluated the effect of the BG concentration (0 and 10 wt%) and the sintering temperature (1200°C and 1300°C) on the microstructure, relative density, and flexural strength of the composite Y:TZP/BG. The Y:TZP and Y:TZP/BG powders were uniaxially pressed and sintered at 1200°C or 1300°C for 1 h. The microstructure was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray Spectroscopy. Relative density was calculated from density values obtained using the Archimedes’ principle. For the flexural strength, specimens (n = 6) were fractured in a biaxial flexural setup using a piston-on-three-balls fixture in a universal testing machine. Bioactivity test was performed in simulated body fluid solution. The results suggested that BG addition decreased the grain size of the composite, increased porosity and caused a significant decrease in the relative density and flexural strength. Crystalline phases of calcium stabilized cubic zirconia and sodium zirconium silicate were formed after the addition of BG. Finally, it was concluded that composite specimens sintered at 1300°C showed the highest density values and larger grains compared to those sintered at 1200°C.     

Performance of SSEBop model for estimating wheat actual evapotranspiration in the Brazilian Savannah region

In a scenario where supplying the increasing demand for food depends highly on irrigation, understanding the temporal and spatial variation of actual evapotranspiration (ETa) is essential for water resources management. In the last decades, several models for mapping and monitoring ETa using remote sensing data were developed and studied. In this work, the Simplified Surface Energy Balance for Operational Application (SSEBop) model was applied to estimate actual evapotranspiration of irrigated wheat in the Cerrado (Brazilian Savannahs) region, using ETM+/Landsat 7 and OLI-TIRS/Landsat 8 images. The results were compared with evapotranspiration calculated by the Bowen ratio method. Considering the data referring to satellites overpasses days, SSEBop overestimated ETa by an average of 13.6%, with a coefficient of determination (R²) equal to 0.82 and root mean square error (RMSE) equal to 0.89 mm d^?1. Considering the daily data for the entire period, including the extrapolation for the days between the satellites overpasses, SSEBop overestimated ETa by an average of 5.5%, with R² equal to 0.66 and RMSE equal to 0.95 mm d^?1. The results obtained demonstrated a reliable performance of the SSEBop for estimating actual evapotranspiration of irrigated wheat in the Cerrado, which can contribute to improve the irrigation efficiency and reduce water use conflicts. Considering the simplicity of the modeling concept and operational implementation, it can also be beneficial for water agencies on water resources planning, management and regulation in the region.     

Quality and safety of maize (Zea mays L.) from Rondônia state storage units,Northern Brazil

The quality and safety of maize (Zea mays L.) from different grain storage units (GSUs), located in the main producing region of Rondônia State, Northern Brazil, were evaluated. Maize grains (n = 76) stored in four GSUs were collected from July to November 2014 and evaluated for grain damages, humidity, fungi and fumonisins (FBs) content. The climate conditions data were also obtained from plant growing to storage periods. Regarding the moisture content and water activity (a_w), these varied from 10.0% to 16.1% and 0.5 to 0.8, respectively. As expected, fungi spores were present in 94.8% of the samples, prevailing Fusarium genera, with a fungi colony maximum of 2.2 × 10⁴ CFU g^?1. Regarding FBs, 60.5% of the samples were contaminated, below Brazilian and United States maximum limits, but 9.2% had levels higher than the European legislation.     

Influence of Ti Incorporation to Bimetallic Mesoporous Carbon in the Production of 2,5-Dimethylfuran from Biomass Derivatives

Catalysis Letters - Monometallic and bimetallic supported catalysts were developed to produce 2,5-dimethylfuran (DMF) trough hydrogenolysis of 5-(hydroxymethyl)furfural (HMF). Detailed...     

What are the potential strategies to achieve potentially more healthful meat products?

In recent years, much attention has been paid to the consumption of meat and processed meat, and their relationship with a healthy diet. This review provides an overview of the potential strategies, which can be used to provide the implications for producing healthy, wholesome and consistently high-quality meat products. Genetic selection, nutrition and feeding management, and gene manipulation techniques have been used as the main strategies to induce beneficial changes in meat and meat composition. Besides, the incorporation of ingredients that play a technological role and are potentially health-enhancing, such as fibre, fat substitutes, natural antioxidants and the reduction of sodium and nitrites, has a high potential in the development of healthier meat products. In this review, we have observed that many strategies have been successfully used to obtain products with low fat, reduced sodium and nitrite content, low cholesterol and absence of synthetic antioxidants. Another point to be highlighted is that some of these strategies also allow obtaining products with positive health effects that can be potential alternatives to improve consumer acceptance.