Properties of chitosan‐based biopolymer films with various degrees of deacetylation and molecular weights

An increase in the depolymerization of chitosan was found with an increased concentration of sodium perborate. Acetic anhydride was added to reacetylated chitosan in a molar ratio per gulcosamine unit, and the amide I band of IR spectra changed with the addition of acetic anhydride. Sixteen chitosans with various molecular weights (MWs) and degrees of deacetylation (DODs) were prepared. X‐ray diffraction patterns indicated their amorphous and partially crystalline states. Increases in the chitosan MW and DOD increased the tensile strength (TS). TS of the chitosan films ranged from 22 to 61 MPa. However, the elongation (E) of chitosan films did not show any difference with MW. TS of chitosan films decreased with the reacetylation process. However, E of chitosan films was not dependent on DOD. The water vapor permeabilities (WVPs) of the chitosan films without a plasticizer were between 0.155 and 0.214 ng m/m² s Pa. As the chitosan MW increased, the chitosan film WVP increased, but the values were not significantly different. Moreover, the WVP values were not different from low DOD to high DOD. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3476–3484, 2003     

Modeling nonisothermal impregnation of fibrous media with reactive polymer resin

The manufacture of polymer composites through resin transfer molding (RTM) or structural reaction injection molding (SRIM) involves the impregnation of a fibrous reinforcement in a mold cavity with a reactive polymer resin. The design of RTM and SRIM operations requires an understanding of the various parameters, such as materials properties, mold geometry, and mold filling conditions, that affect the resin impregnation process. Modeling provides a potential tool for analyzing the relationships among the important parameters. The present work provides the physical model and finite element formulations for simulating the mold filling stage. Resin flow through the fibers is modeled using two-dimensional Darcian flow. Simultaneous resin reaction and heat transfer among resin, mold walls, and fibers are considered in the model. The proposed technique emphasizes the use of the least squares finite element method to solve the convection dominated mass and energy equations for the resin. Excellent numerical stability of the proposed technique provides a powerful numerical method for the modeling of polymer processing systems characterized by convection dominated transport equations. Results from example numerical studies for SRIM of polyurethane/glass fiber composites were presented to illustrate the application of the proposed model and numerical scheme.     

Calcium binding mode of {gamma}-carboxyglutamic acids in conantokins

Conantokin-T (con-T) and conantokin-G (con-G) are two highlyhomologous peptide toxins found in Conus venom. The former isa 21-residue peptide with four -carboxyglutamic acid (Gla) residues(at positions 3, 4, 10 and 14), while the latter is a 17-residuepeptide with five -carboxyglutamic acid residues (at positions3, 4, 7, 10 and 14). Despite the apparent similarity in numberand relative positions of the -carboxyglutamic acid residues,¹¹³Cd-NMR studies indicated a distinct metal binding behaviorfor con-G and con-T. There appears to be four binding sitesin con-G in contrast to one metal binding site in con-T. Toelucidate the mode of calcium binding by the -carboxyglutamicacid residues in these conantokins, we designed various analogouspeptides with their -carboxyglutamic acid replaced by otheramino acid residues. ¹¹³Cd-NMR experiments on conantokin analoguesreveal that the major difference in the number of metal bindingsites between con-G and con-T is due to the residue at position7. We also performed molecular simulations to calculate therelative binding free energies of several potential bindingsites. Based on our theoretical and experimental results, wepropose a `four-site' binding model for conantokin-G and a `single-site'binding model for conantokin-T.     

Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder

Nowadays, waste EPDM (ethylene propylene diene monomer) increasingly has been causing significant environmental problems with increasing numbers of vehicles. From the perspective of the environment and economics, recycling is the best method to treat waste materials. This study investigated waste EPDM/PP (polypropylene) blends with waste EPDM. Waste EPDM powders were treated ultrasonically, which physically modifies the rubber particles to confer good mechanical properties. Also investigated were the relevance of the mass percentage of the dispersed phase, the influence of the geometry and rotation speeds of the screw used in extrusion, and the melting temperature of PP materials on the morphology and mechanical properties of the blend. The purpose of this study was to develop a valuable thermoplastic elastomer from waste EPDM. This study concentrated on determining the optimum conditions for producing a blend by extrusion, including parameters of screw geometry, screw rotational speed, and operating temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2503–2507, 2003     

Fabrication of a gradient refractive index preform using laminar shear mixing

A gradient refractive index rod was successfully prepared by a new fabrication method using laminar shear mixing, and a graded index polymer optical fiber that satisfied IEEE1394b was obtained from the method. To fabricate the gradient refractive index rod, a liquid monomer mixture with a relatively low refractive index was placed in a prepared cylindrical glass reactor and a transparent polymer rod with a higher refractive index was introduced at the center of the reactor. The reactor and the polymer rod were then rotated concurrently with a small rotating speed difference to generate a Couette flow in the liquid phase. The centrifugal force generated by rotation and the polymer diffusion into the liquid monomer mixture developed a graded concentration profile in a radial direction. The Couette flow could reduce the concentration fluctuation in a tangential direction. In addition, the graded index profile could be controlled by the copolymer composition of the rod and its diameter. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1100–1104, 2005     

Surface diffusion in microporous media

The surface diffusion of He, Ne, H₂, Ar, O₂, N₂ and CO₂ through Vycor microporous glass was analyzed theoretically and experimentally in the low pressure range as a function of temperature. A statistical-mechanical treatment was carried out in terms of partition functions to derive a general equation of surface flow. It was possible to separate the surface diffusion from the total flow using a simplified working equation. The conventional method which assumes that there is no adsorbed flow for helium should be discarded, because the fraction of surface diffusion for helium ranges from 0.133 to 0.247. It is also illustrated how to predict the permeability of a new gas for the same porous medium.     

Energetic surface heterogeneity of nanocrystalline TiO<Subscript>2</Subscript> films for dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) have been receiving significant attention because they have many advantages compared to conventional organic solar cells. It has been known that the photovoltaic characteristics of DSSC are highly dependent on the adsorption properties of dyes on TiO₂ films. To analyze the surface heterogeneity of TiO₂ surfaces, single-phase anatase nanocrystallite titanium films were prepared by sol-gel method using the hydrolysis reaction of titanium tetraisopropoxide under acidic condition and characterized by XRD, FE-SEM and BET analysis. The adsorption energy distribution functions were calculated by the generalized nonlinear regularization method. It was found that the shape and the intensity of the adsorption energy distribution curve determined were highly related with the physical properties (i.e., geometrical heterogeneity) and chemical characteristics (i.e., energetic heterogeneity) of nanocrystalline TiO₂ for DSSC.     

An EGF-pseudomonas exotoxin A recombinant protein with a deletion in toxin binding domain specifically kills EGF receptor bearing cells

We constructed two chimeric toxins; one composed of epidermalgrowth factor (EGF) and pseudomonas exotoxin A (PE), designatedEGF-PE and the other composed of EGF and PE with a deletionof the Ia domain (cell-binding domain), designated EGF-PE (Ia).Both chimeric toxins reacted with anti-EGF and anti-PE antibodies.The cell-killing experiments showed that EGF-PE, but not EGF-PE(Ia),was cytotoxic to the murine fibroblast cell line NR6, whichcarried the PE receptor, but not the EGF receptor. However,after NR6 was transfected with DNA for the expression of humanEGF receptor, the transfected cell line, designated NRHER5,overexpressed human EGF receptors and became sensitive to EGF-PE(IA).The cytotoxicity of EGF-PE(Ia), but not EGF-PE, to NRHER5 canbe completely blocked by an excess amount of EGF. To completelyreverse the cytotoxicity of EGF-PE on NRHER5, both the EGF receptorpathway and the PE receptor pathway need to be blocked. Theseresults suggest that EGF-PE exhibits both EGF and PE bindingactivities, while EGF-PE(IA) possesses only EGF binding activity.Thus, EGF-PE(Ia) may be a better chimeric toxin than EGF-PEin terms of target specificity to EGF receptor bearing cells.We, therefore, examined the cytotoxicity of EGF-PE(Ia) to varioushuman cancer cell lines. We find that human cancer cells containingmore EGF receptors are more sensitive to EGF-PE(Ia).     

Investigation into etching mechanism of polyethylene terephthalate (PET) films treated in helium and oxygenated‐helium atmospheric plasmas

This research makes an investigation into the etching mechanism of atmospheric plasma conditions on the surface of polyethylene terephthalate (PET) films. Two types of untreated PET films (S/200 and S/500) were exposed to plasma for 0 to 5.0 min in 30‐s increments. The first set of each film type was treated in helium plasma, while the second was treated in oxygenated‐helium plasma. Differential Scanning Calorimetry (DSC) was used to characterize pre‐ and post‐exposure films. Weight changes and the degree of solubility were also determined. Based on peak area results, the percent crystallinity of PET S/200 increased by an average of 4.57% (helium treated) and 13.56% (oxygenated‐helium treated), while the S/500 showed only a small increase. There was no significant change in the melting or crystallization temperatures of either film type, indicating a decrease in amorphous content versus an increase in crystalline material. Weight loss analysis supports this theory. Solubility testing revealed a continual decrease in swelling as exposure time was increased. A model was developed to predict the change in the degree of solubility for polyphase surfaces considering the etching rate per phase. The model was applied to PET with good correlation between the model and experimental data. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2383–2389, 2004     

Companion robots for older adults: Rodgers’ evolutionary concept analysis approach

Intelligent Service Robotics - This study aims to analyze the concept of companion robots for older adults from the perspective of nursing. This study employed a concept analysis. The literature...