Synergistic effects of micro-/nano-fillers on conductive and electromagnetic shielding properties of polypropylene nanocomposites

This study presents the synergistic effects of graphene nanosheets (GNSs) and carbon fibers (CFs) additions on the electrical and electromagnetic shielding properties of GNS/CF/polypropylene (PP) composites. These composites were fabricated by the melt blending of different ratios of GNSs and CFs (20:0, 15:5, 10:10, 5:15 and 0:20 wt/wt%) into a PP polymer matrix using a Brabender mixer. Besides, the chemical and crystalline structures and the thermal stability of the resultant GNS/CF/PP composites were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). FT-IR and XRD showed that with the addition of GNSs content, transmittances at 1373.4?cm^?1 and 1454.4?cm^?1 became smaller and the characteristic peak at 26.82° became stronger. TGA showed that the GNS/CF/PP composite can be used at high temperature below 456°C. Blending 10?wt% CFs and 10?wt% GNSs into the PP polymer resulted in excellent conductivity (0.397 S/cm), which indicated the occurrence of the critical percolation threshold phenomenon, and also reached the maximum electromagnetic shielding effectiveness (EMSE) of 20?dB at 1.28–2.00?GHz. Laminated with five layers of composites, its EMSE achieved 25–38?dB at 0.3–3.0?GHz, corresponding to blocking of 94.38–98.74% electromagnetic waves.     

Performance Evaluation of Composite Electrolyte with GQD for All-Solid-State Lithium Batteries

The use a stabilized lithium structure as cathode material for batteries could be a fundamental alternative in the development of next-generation energy storage devices. However, the lithium structure severely limits battery life causes safety concerns due to the growth of lithium (Li) dendrites during rapid charge/discharge cycles. Solid electrolytes, which are used in high-density energy storage devices and avoid the instability of liquid electrolytes, can be a promising alternative for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, through the application of a low-dimensional graphene quantum dot (GQD) layer structure, stable operation characteristics were demonstrated based on Li⁺ ion conductivity and excellent electrochemical performance. Moreover, the device based on the modified graphene quantum dots (GQDs) in solid state exhibited retention properties of 95.3% for 100 cycles at 0.5 C and room temperature (RT). Transmission electron microscopy analysis was performed to elucidate the Li⁺ ion action mechanism in the modified GQD/electrolyte heterostructure. The low-dimensional structure of the GQD-based solid electrolyte has provided an important strategy for stably-scalable solid-state lithium battery applications at room temperature. It was demonstrated that lithiated graphene quantum dots (Li-GQDs) inhibit the growth of Li dendrites by regulating the modified Li⁺ ion flux during charge/discharge cycling at current densities of 2.2–5.5 mA cm, acting as a modified Li diffusion heterointerface. A full Li GQD-based device was fabricated to demonstrate the practicality of the modified Li structure using the Li–GQD hetero-interface. This study indicates that the low-dimensional carbon structure in Li–GQDs can be an effective approach for stabilization of solid-state Li matrix architecture.     

Applying Job Shop Scheduling to SMEs Manufacturing Platform to Revitalize B2B Relationship

A small and medium enterprises (SMEs) manufacturing platform aims to perform as a significant revenue to SMEs and vendors by providing scheduling and monitoring capabilities. The optimal job shop scheduling is generated by utilizing the scheduling system of the platform, and a minimum production time, i.e., makespan decides whether the scheduling is optimal or not. This scheduling result allows manufacturers to achieve high productivity, energy savings, and customer satisfaction. Manufacturing in Industry 4.0 requires dynamic, uncertain, complex production environments, and customer-centered services. This paper proposes a novel method for solving the difficulties of the SMEs manufacturing by applying and implementing the job shop scheduling system on a SMEs manufacturing platform. The primary purpose of the SMEs manufacturing platform is to improve the B2B relationship between manufacturing companies and vendors. The platform also serves qualified and satisfactory production opportunities for buyers and producers by meeting two key factors: early delivery date and fulfillment of processing as many orders as possible. The genetic algorithm (GA)-based scheduling method results indicated that the proposed platform enables SME manufacturers to obtain optimized schedules by solving the job shop scheduling problem (JSSP) by comparing with the real-world data from a textile weaving factory in South Korea. The proposed platform will provide producers with an optimal production schedule, introduce new producers to buyers, and eventually foster relationships and mutual economic interests.     

Vibration measurement by the time-averaged electronic speckle pattern interferometry methods

Three different image-processing methods based on the time-averaged technique were compared by the electronic speckle pattern interferometry (ESPI) technique for vibration measurement. The three methods are the video-signal-addition method, the video-signal-subtraction method, and the amplitude-fluctuation method. Also, errors introduced by using the zero-order Bessel function directly into the analysis of the fringe pattern were investigated. The video-signal-addition method has been the most generally used ESPI technique for vibration measurement. However, without additional image and/or signal-processing procedures, the fringe pattern obtained directly by the video-signal-addition method is rather difficult to observe. The reason for poor visibility of the experimentally obtained fringe pattern with this method is explained. To increase the fringe pattern's visibility without additional image and/or signal processes, we tried two video-signal-subtraction methods. One of the two methods is the video-signal-subtraction method that has normally been used in the static applications. The other method, called the amplitude-fluctuation method, and its associated theory are reported here.     

Study on the solidification cracking behaviour of high strength aluminum alloy welds: Effects of alloying elements and solidification behaviours

The solidification cracking susceptibility of the 7000 series Al-Zn-Mg high strength aluminum alloy has been studied. The cracking behaviour of the specimens were evaluated by a Tig-a-Ma-Jig Varestraint test process under various augmented strain conditions. It has been experimentally observed that the addition of copper decreased the solidification cracking resistivity of the high strength aluminum alloy weld metal by increasing the total crack length (TCL). The effect of the addition of manganese on the solidification cracking behaviour is found to be beneficial by markedly decreasing the solidification cracking susceptibility as the manganese content increases from 0.3 to 0.7%. This enhancement by manganese is understood to be attributed to the reduction of the mushy zone size during the solidification process. The effects of chromium and zirconium additions are also investigated. The weld metal containing zirconium is less sensitive to the solidification cracking than the weld metal containing chromium. In addition, the solidification behaviours of the tested alloys are also investigated and it is found that as the solidification temperature range (T) becomes narrow, the solidified structure becomes more dendritic in its features which is believed to create higher solidification cracking resistance.     

Magnetic compass fault detection method for GPS/INS/magnetic compass integrated navigation systems

This paper proposes a magnetic compass fault detection method for GPS/INS/Magnetic compass integrated navigation systems. The fault is assumed to be caused by the hard iron and soft iron effect and modeled as an abrupt change in the magnetic compass output. In order to detect the fault, a test statistic related with only azimuth error measurement is determined. When a fault is detected, the GPS/INS/Magnetic compass integrated navigation system is changed into a GPS/INS integrated navigation system mode. In order to show the validity of the proposed method, computer simulation and van testing are carried out. The simulation and van test results show that the proposed navigation system gives more accurate outputs than the GPS/INS/Magnetic compass without the proposed method.     

Monitoring agricultural drought for arid and humid regions using multi-sensor remote sensing data

While existing remote sensing-based drought indices have characterized drought conditions in arid regions successfully, their use in humid regions is limited. We propose a new remote sensing-based drought index, the Scaled Drought Condition Index (SDCI), for agricultural drought monitoring in both arid and humid regions using multi-sensor data. This index combines the land surface temperature (LST) data and the Normalized Difference Vegetation Index (NDVI) data from Moderate Resolution Imaging Spectroradiometer (MODIS) sensor, and precipitation data from Tropical Rainfall Measuring Mission (TRMM) satellite. Each variable was scaled from 0 to 1 to discriminate the effect of drought from normal conditions, and then combined with the selected weights. When tested against in-situ Palmer Drought Severity Index (PDSI), Palmer's Z-Index (Z-Index), 3-month Standardized Precipitation Index (SPI), and 6-month SPI data during a ten-year (2000-2009) period, SDCI performed better than existing indices such as NDVI and Vegetation Health Index (VHI) in the arid region of Arizona and New Mexico as well as in the humid region of North Carolina and South Carolina. The year-to-year changes and spatial distributions of SDCI over both arid and humid regions generally agreed to the changes documented by the United States Drought Monitor (USDM) maps.     

A new vertical‐alignment LC mode with high‐transmittance and fast‐response‐time features

Abstract— A novel pixel design for vertical‐alignment LCDs with superior transmittance has been developed. The new liquid‐crystal mode, refered to as the hole‐induced vertical‐alignment mode (Hi‐VA), uses a via hole of an organic layer on a TFT substrate to achieve multi‐domain alignment. Compared to the conventional design, the Hi‐VA mode has a transmittance of up to 135% with a contrast ratio of 2000:1. Moreover, the new structure is free from ITO patterning or protrusion on the color‐filter side, which makes the fabrication process simple and low cost.