Partial Oxidation of Methane to Synthesis Gas Over Ru-Loaded Y2O3 Catalyst

Ru-loaded Y₂O₃ catalyst was investigated for the partial oxidation of methane to synthesis gas. Ru(0.5 wt%)/Y₂O₃ catalyst afforded a high CH₄ conversion of 27% at a CH₄:O₂ ratio of 5 to give nearly a 1:2 ratio of CO and H₂ with a selectivity of 75% at 873 K. Ru(0.5 wt%)/Y₂O₃ catalyst maintained high catalytic activity over 10 h in the partial oxidation of methane. Carbon deposition of the catalyst surface in the reaction of CH₄ was examined by thermogravimetric analyses, and it was found that no carbon deposition occurred on the Ru(0.5 wt%)/Y₂O₃ catalyst. The synthesis-gas production proceeded basically via a two-step reaction consisting of methane combustion to give H₂O and CO₂, followed by the reforming of methane from CO₂ and steam.     

Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

基于魏格纳分布的鼓泡流化床中结焦早期诊断

An experimental verification is reported on the early predicting index of agglomeration in bubbling fluidized bed. Coarse quartz sand, which has the same density but larger diameter than the bed material, was used to simulate the initial agglomerated particle. Wigner distribution was used to analyze the pressure fuctuation of the tested bed, and the average amplitude of local domain frequency （LDF） and local peak weighted average frequency （LPWA） under different operating conditions were measured and compared. The results showed that the LDF is sensitive to the agglomeration phenomena and had quick response to the incipient agglomeration in fluidized beds. It can be concluded from the results that these two parameters could be taken as the characteristic indexes to the agglomeration in fuidized beds.     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Ca-α SiAlON hollow spheres prepared by carbothermal reduction–nitridation from different SiO2 powders

The formation process of hollow spheres composed of nanosized Ca-α SiAlON particles was investigated using SiO₂ starting powders with different characteristics in particle size, shape and crystalline state. TEM observations showed Ca-α SiAlON hollow spheres composed of a large number of nanosized particles in the products prepared at 1450 °C for 120 min in nitrogen. In all systems, the Ca-α SiAlON hollow spheres were always produced through an intermediate Si–Al–Ca–O liquid phase in the same mechanism, regardless of the characteristics of SiO₂ starting powders used. Spherical solid particles consisted of amorphous phase containing Si, Al, Ca, O and a small amount of N were generated at the initial stage of carbothermal reduction–nitridation. These spherical solid particles changed into hollow particles with the progression of the reaction from the liquid phase to the crystalline Ca-α SiAlON with increasing temperature.     

Ice crystal formation in the carbon nanotube suspension: A modelling approach

Freeze-dried porous solid foams were prepared from carbon nanotube (CNT) suspensions via either contact freezing with a heat exchanger or immersion freezing into a cryo-bath. Microstructures in the freeze-dried foam cast by ice crystals formed during the freezing step. It was found that domains of the carbon nanotubes in the freeze-dried solid foams were fairly well interconnected, and the microstructures were largely influenced by the freezing condition and freezing method. A mathematical model was proposed to simulate the observed thermal history during the freezing step; then theoretical predictions of the microstructural features were attempted. The simulated thermal history was in good agreement with experimental result. The resulting mean ice crystal sizes L* could be estimated from the calculated freezing front velocity (R) and the temperature gradient in the frozen zone (G). Interestingly, it was found that a correlation based on the power law (L*∝R^?0.2G^?0.2) was applicable to the present system for both the contact and immersion freezing methods. Though the fundamental ice crystallization phenomena were essentially the same for both freezing methods, actual temperature distribution and movement of the freezing front through the whole freezing bulk could control the morphology of ice crystal in the frozen matrix. In other words, good control of thermal flow in the freezing system would greatly contribute to rational design of microstructures of the CNT foam.     

What is the significance of nitrogen-vacancy centers in the doping into diamond?

In order to advance quantum computer after successful synthesis of a qubit (quantum-bit) using a NV (nitrogen-vacancy) center in diamond crystal, the innovation of a NOT processor is strongly demanded. A candidate of it can be one NV center associated with an additional N atom, which is called a NV–N center. Making use of a classical molecular dynamics simulation of N ion implantation into pure diamond with an energy of 200 eV, we have examined the crystallographic structure of “NV–N” centers. However, at low temperature of 30 K, most implanted N atoms became interstitials, thus it was difficult to identify even NV centers.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.