Accelerated aging of extruded dielectric power cables. I. Controland monitoring methodology

An improved accelerated cable life test is described. Through the use of programmable logic controllers (PLCs), very precise and consistent control of the accelerated aging process has been achieved. A computer has been utilized to make continuous real-time acquisition and storage of key operating parameters possible. This precise control and monitoring methodology has permitted the study of the synergistic effects of voltage and temperature on the accelerated aging of full-sized cables in the laboratory     

Direct volume display devices

Direct volume display devices (DVDDs), which display 3D volumes and surfaces in a volume by providing depth rather than depth cues, are discussed. The transport theory model is used to illustrate why DVDDs are best able to support fast presentation from arbitrary directions. The technology underlying various DVDDs is described. Specifically, the design and operation of the OmniView rotating-screen DVDD are examined. The air-traffic-control/air-tactics-analysis, satellite orbit mechanics, and time-critical target prosecution applications of DVDDs are also discussed     

Long-term testing and applications of high-stress MV EPR cables

High-stress design 35-kV ethylene propylene rubber (EPR)-insulated cables with 1.14-mm (45-mil) wall reduction have been in service for more than ten years. In the mid 1990s, an extensive cable testing program was initiated to demonstrate that high-stress designs up to 4 kV/mm (101.6 V/mil) exhibit a significant electrical and mechanical safety margin to operate on typical utility network systems. Investigations were also undertaken to demonstrate the suitability of accessories for high-stress designs. This paper will present the results of six-year, long-term wet electrical testing conducted to demonstrate that with proper design, the aging performance of standard wall and high-stress design cables provide satisfactory results and suitable performance for the intended application. Additionally, utility field experience is presented on 35- and 15-kV cables operating at high stress. The experience for these 15-kV medium-voltage EPR cable designs employ the highest recommended stress for cables of this class, as well as taking into account the complete system performance.     

PHYSIOLOGICAL CONSEQUENCES OF MINIMALLY PROCESSED FRUITS AND VEGETABLES

The physiological consequences of minimal processing are dire. Mechanical injury sets off a complex series of events which result in loss of quality (i.e. color, texture and flavor). Control of this wounding response is a major obstacle that must be overcome. To prolong postharvest life, respiration must be reduced while producing enough energy to maintain the “energized state”. The central roles of membranes and calcium in maintaining quality are discussed.     

On the capacity of a cellular CDMA system

It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity     

The effects of bleached and unbleached rosemary oleoresins on light-sensitized oxidation of soybean oil

Bleached and unbleached forms of a rosemary oleoresin (RO) in stripped and nonstripped soybean oil behave both as antioxidant and prooxidant in a light-induced oxidative system. At 0.02 and 0.05% levels, RO had the greatest antioxidant activity, while at 0.01 and 0.5% levels it had the highest prooxidant activity in both stripped and nonstripped soybean oil. Treatment of both soybean oil systems with tertiary butylhydroquinone controlled light-induced oxidation of the oil better than did the oleoresin treatments. The prooxidant activity of the 0.5% RO level was probably due to an excess of prooxidant components being carried into the oil at that level, whereas the reduced antioxidant activity at 0.01% was probably due to the low initial level of active antioxidant components being added to the oil. Published as Journal Series No. 10072, Nebraska Agricultural Research Division, Department of Food Science and Technology, University of Nebraska, Lincoln, NE 68583-0919.     

Effect of pressure on three catalytic partial oxidation reactions at millisecond contact times

The effects of pressure on reactant conversion and product selectivities in three catalytic oxidation systems have been examined at pressures between 1 and > 5 atm. Reaction was sustained autothermally near adiabatic operating conditions at temperatures of 1000°C with residence times over the noble metal catalysts between 10^–4 and 10^–2 s. The three systems investigated were (1) HCN synthesis over Pt-10% Rh gauze catalysts, (2) methane oxidation to synthesis gas (CO and H₂) over rhodium-coated monoliths, and (3) ethane conversion to ethylene over platinum-coated monoliths. We find that selectivities in all three reactions do not change dramatically with approximately a five-fold increase in pressure. This strongly suggests that free radical homogeneous chain reactions are not significant in these processes and that they can be operated reliably above atmospheric pressure. For the synthesis of HCN over Pt-10% Rh gauzes, the selectivity to HCN can be maintained above 0.75 at pressures up to 5.5 atm. Selectivities to synthesis gas (CO and H₂) from a methane-air mixture over a Rh-coated foam monolith at pressures up to 5.5 atm were maintained above 0.90. Over a Pt-coated foam monolith, the selectivity to ethylene from ethane-air and ethane-O₂ mixtures was independent of pressure up to 6.5 atm and conversion rose slightly although it was necessary to maintain constant velocity and residence time over the catalyst to avoid carbon formation.This research was supported by DOE under Grant No. DE-FG02-88ER13878.