基于仿射模型的重叠块运动估计补偿方法

本文对 Ｈ．２６３中基于平移模型的重叠块运动估计补偿方法进行改进,提出了一种基于仿射模型的重叠块运动补偿方法,该方法对复杂运动图像质量有明显改善。     

LIGA技术制作Fresnel波带片的研究

简要介绍了利用ＬＩＧＡ技术中同步辐射光刻、微电铸技术制作α粒子编码成像波带片的研究,讨论了编码波带片的结构和影响波带片的平面和层析分辨率的参数。根据实验要求设计和研制了一种α粒子编码成像波带片。     

新型应力不敏感FBG温度传感封装结构

光纤Bragg光栅（FBG）可以同时传感多个参量,但当仅需测量一个参量时,测量结果可能会受到一个或多个其他参量的影响,其中以温度和应力交叉敏感最为突出。为此,对比了其他几种应力不敏感型FBG温度传感器的优缺点,设计了一种新型的应力不敏感FBG温度传感封装结构,并通过实验验证了其温度传感性能及应力不敏感性。     

Design and Performance of Space–Time Precoder With Hybrid ARQ Transmission

Multiple-input-multiple-output (MIMO) technology can efficiently increase the system capacity in rich scattering environments without increasing the bandwidth or transmission power. The precoder for MIMO transmission is a processing technique that exploits the channel state information (CSI) by operating on the signal before transmission to effectively improve link performance. A hybrid automatic repeat request (HARQ) scheme can be incorporated with the linear precoder to ensure highly reliable communication. To fully utilize the type-I HARQ diversity gain, particularly in slow-fading channels, we propose the optimal design principle of linear precoders whose column vectors are correspondingly orthogonal to each other. In addition, the practical solution based on codebook is given in this paper. Finally, simulation results demonstrate the effectiveness of the proposed precoders in reducing the detection of bit error rate (BER) and in improving normalized throughput.     

基于脉宽调制的D类放大器信号分析与仿真

D类放大器一般采用脉宽调制的方式实现,其实质是一个PWM波的调制解调问题。文章通过对PWM信号的频谱分析,揭示出D类放大器的实现原理。文章还采用MATLAB软件平台,对PWM波的频谱进行了仿真,给出了仿真结果,直观地验证了理论分析的结论。     

Micromechanical optical switching with voltage control using SOImovable integrated optical waveguides

Optical switching is demonstrated using movable integrated optical waveguides fabricated on silicon-on-insulator substrates. The switching effect is produced by the voltage-controlled micromechanical deflection of the movable waveguides. The dynamic response of the deflection is studied. A contrast ratio of 12 dB of switching is obtained using an applied voltage of less than 10 V. At 20 V, the contrast ratio is about 40 dB     

Hierarchical Carbon Nanotubes with a Thick Microporous Wall and Inner Channel as Efficient Scaffolds for Lithium–Sulfur Batteries

The proposal herein is based on an efficient sulfur host, namely hierarchical microporous–mesoporous carbonaceous nanotubes (denoted as HMMCNT) that feature a thick microporous wall and inner hollow channel. The electrochemical performance of the composite (HMMCNT‐S) is studied systematically at different discharge cut‐off voltages and at varying sulfur content. The cycling behavior in different voltage windows is compared and the highest specific capacity is shown for HMMCNT‐S‐50 in the range of 1.4–2.8 V. These results imply that better energy densities can be achieved by controlling the discharge cut‐off voltage. Moreover, we show that when the sulfur loading is 50% (HMMCNT‐S‐50), the cycling and rate performance is better than that of the composite loaded with 40% sulfur (HMMCNT‐S–40). Benefiting from the attractive hierarchical micro/mesoporous configuration, the obtained hybrid structure not only promotes electron and ion transfer during the charge/discharge process, but also efficiently impedes polysulfide dissolution. More specifically, the electrode can deliver a specific capacity of 558 mA h g^‐1 even after 150 cycles at a high rate of 1600 mA g^‐1 with a decay rate of only 0.13% per cycle. Considering the beneficial structure of these carbon nanotubes, it is very feasible that these structures may also be used in other research fields, including in catalysis, as supercapacitors, in drug‐delivery applications, for absorption, and so on.     

Delocalized Electron Accumulation at Nanorod Tips: Origin of Efficient H2 Generation

Photocatalytic hydrogen (H₂) evolution requires efficient electron transfer to catalytically active sites in competition with charge recombination. Thus, controlling charge‐carrier dynamics in the photocatalytic H₂ evolution process is essential for optimized photocatalyst nanostructures. Here, the efficient delocalization of electrons is demonstrated in a heterostructure consisting of optimized MoS₂ tips and CdS nanorods (M‐t‐CdS Nrs) synthesized by amine‐assisted oriented attachment. The heterostructure achieves photocatalytic H₂ activity of 8.44 mmol h^?1 g^?1 with excellent long‐term durability (>23 h) without additional passivation under simulated solar light (AM 1.5, 100 mW cm^?2). This activity is nearly two orders of magnitude higher than that of pure CdS Nrs. The impressive photocatalytic H₂ activity of M‐t‐CdS Nrs reflects favorable charge‐carrier dynamics, as determined by steady‐state PL and time‐correlated single photon counting correlation analysis at low temperature. The MoS₂ cocatalysts precisely located at the end of the CdS Nrs exhibit ultrafast charge transfer and slow charge recombination via spatially localized deeper energy states, resulting in a highly efficient H₂ evolution reaction in lactic acid containing an electrolyte.     

基于渐变组分体材料InGaAs的宽带长波长超辐射二极管

研制了一种新型的非选择性再生长掩埋异质结构长波长超辐射二极管(SLD).该器件采用渐变组分体材料InGaAs作为有源区,由金属有机物化学气相外延制备.150mA下,SLD发射谱宽的半高全宽为72nm,覆盖范围从1602到1674nm.发射谱光滑、平坦,光谱波纹在1550到1700nm的范围内小于0.3dB.室温连续工作,注入电流200mA下,器件获得了4.3mW的出光功率.器件适用于气体探测器和L-band光纤通信的光源.     

<100>沟道方向对高迁移率双轴应变硅p-MOSFET的作用

双轴应变技术被证实是一种能同时提高电子和空穴迁移率的颇有前景的方法;<100>沟道方向能有效地提升空穴迁移率.研究了在双轴应变和<100>沟道方向的共同作用下的空穴迁移率.双轴应变通过外延生长弛豫SiGe缓冲层来引入,其中,弛豫SiGe缓冲层作为外延底板,对淀积在其上的硅帽层形成拉伸应力.沟道方向的改变通过在版图上45°旋转器件来实现.这种旋转使得沟道方向在(001)表面硅片上从<110>晶向变成了<100>晶向.对比同是<110>沟道的应变硅pMOS和体硅pMOS,迁移率增益达到了130%;此外,在相同的应变硅pMOS中,沟道方向从<110>到(100)的改变使空穴迁移率最大值提升了30%.讨论和分析了这种双轴应变和沟道方向改变的共同作用下迁移率增强的机理.