Multi-step precipitation separation system using mixture of thermosensitive polymers

Summary Multi-step precipitation separation system was developed by using aqueous mixtures of some thermosensitive polymers. The following three polymers were used here; poly(N-n-propylacrylamide), poly(N-isopropylacrylamide), and poly(N-isopropylmethacrylamide). A mixture of the three polymers showed three endothermic peaks, and the peak top temperatures were almost consistent with that of the each polymer solution. The polymers were purified by thermal precipitation to obtain fractions which can respond in narrow temperature ranges prior to use. In the case of the precipitation separation of two polymers mixtures, purities of the obtained precipitate and supernatant fractions became high comparing with the case in which the unpurified polymers were used. Parts of the polymers which were not the precipitation targets were also precipitated by the separation procedures. This was caused not only by insolubilization of the non-targeted polymers due to their phase transitions but also by their non-specific entanglement with the targeted polymers. The purities of the fractions also improved when the difference of the phase transition temperature between two polymers was large enough to avoid the coprecipitation. In the case of the precipitation separation of mixtures of the three polymers, purities of each fraction also improved when the purified polymers were used.     

Structure and properties of nanocomposites based on poly(butylene succinate) and organically modified montmorillonite

Poly(butylene succinate) and organically modified montmorillonite nanocomposites with there different compositions were prepared via melt blending in a twin‐screw extruder. The structure of the nanocomposites was studied with X‐ray diffraction and transmission electron microscopy, which revealed the formation of intercalated nanocomposites, regardless of the silicate loading. Dynamic mechanical analysis revealed a substantial increase in the storage modulus of the nanocomposites over the entire temperature range investigated. The tensile property measurements showed a relative increase in the stiffness with a simultaneous decrease in the yield strength in comparison with that of neat poly(butylene succinate). The oxygen gas barrier property of neat poly(butylene succinate) improved after nanocomposite preparation with organically modified montmorillonite. The effect of the layered‐silicate loading on the melt‐state linear viscoelastic behavior of the intercalated nanocomposites was also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 777–785, 2006     

Development of high performance Raney Cu-based catalysts for methanol synthesis from CO2 and H2

Catalytic hydrogenation of CO₂ into methanol has been investigated over Raney Cu-based catalysts. The Raney catalysts leached in NaOH/ZnO solutions showed high activities and selectivities for methanol synthesis. The deposition of Zn on the surface of Cu particles increased the surface area and the specific activity of Raney Cu–M. Raney Cu–Zr developed was significantly more active than a commercial catalyst.     

Pollution of montane soil with Cu, Zn, As, Sb, Pb, and nitrate in Kanto, Japan

Soil cores and rainwater were sampled under canopies of Cryptomeria japonica in four montane areas along an atmospheric depositional gradient in Kanto, Japan. Soil cores (30 cm in depth) were divided into 2-cm or 4-cm segments for analysis. Vertical distributions of elemental enrichment ratios in soils were calculated as follows: (X/Al)_i/(X/Al)_BG (where the numerator and denominator are concentration ratios of element-X and Al in the i- and bottom segments of soil cores, respectively). The upper 14-cm soil layer showed higher levels of Cu, Zn, As, Sb, and Pb than the lower (14-30 cm) soil layer. In the four areas, the average enrichment ratios in the upper 6-cm soil layer were as follows: Pb (4.93) ≥ Sb (4.06) ≥ As (3.04) > Zn (1.71) ≥ Cu (1.56). Exogenous elements (kg/ha) accumulated in the upper 14-cm soil layer were as follows: Zn (26.0) > Pb (12.4) > Cu (4.48) ≥ As (3.43) ≥ Sb (0.49). These rank orders were consistent with those of elements in anthropogenic aerosols and polluted (roadside) air, respectively, indicating that air pollutants probably caused enrichment of these elements in the soil surface layer. Approximately half of the total concentrations of As, Sb, and Pb in the upper 14-cm soil layer were derived from exogenous (anthropogenic) sources. Sb showed the highest enrichment factor in anthropogenic aerosols, and shows similar deposition behavior to NO₃⁻, which is a typical acidic air pollutant. There was a strong correlation between Sb and NO₃⁻ concentrations in rainfall (e.g., in the throughfall under C. japonica: [NO₃⁻] = 21.1 [dissolved Sb], r = 0.938, p < 0.0001, n = 182). Using this correlation, total (cumulative) inputs of NO₃⁻ were estimated from the accumulated amounts of exogenous Sb in soils, i.e., 16.7 t/ha at Mt. Kinsyo (most polluted), 8.6 t/ha at Mt. Tsukuba (moderately polluted), and 5.8 t/ha at the Taga mountain system (least polluted). There are no visible ecological effects of these accumulated elements in the Kanto region at present. However, the concentrations of some elements are within a harmful range, according to the Ecological Soil Screening Levels determined by the U.S. Environmental Protection Agency.     

A nationwide survey of NDMA in raw and drinking water in Japan

A nationwide survey of N-nitrosodimethylamine (NDMA) in both raw and finished water samples from drinking water treatment plants (DWTPs) in Japan was conducted. NDMA was analyzed by solid-phase extraction (SPE) followed by ultra performance liquid chromatography (UPLC) coupled with tandem mass spectrometry (MS/MS). NDMA was detected in 15 of 31 raw water samples collected in the summer at concentrations up to 2.6 ng/L, and in 9 of 28 raw water samples collected in winter at concentrations up to 4.3 ng/L. The NDMA concentrations were higher in raw water samples collected from treatment plants with catchment areas that have high population densities. The NDMA concentrations were higher in river water samples collected from the east and west of Japan than in those collected from other areas. NDMA was detected in 10 of 31 finished samples collected in summer at reduced concentrations of up to 2.2 ng/L, while 5 of 28 finished samples collected in winter showed NDMA concentrations up to 10 ng/L. The highest NDMA levels were detected in finished water samples collected from the Yodo River basin DWTP, which uses ozonation. Furthermore, evaluation of the process water produced at six advanced water treatment plants was conducted. Influent from the Yodo River indicated that the NDMA concentration increased during ozonation to as high as 20 ng/L, and then decreased with subsequent biological activated carbon treatment. To our knowledge, this is the first nationwide evaluation of NDMA concentrations in water conducted in Japan to date.     

日本移动服务业的过去和将来

分别对日本三代移动通信系统的发展进行了描述。第一代系统致力于实现随时、随地的通话，第二代系统的特征是基于语音的附加服务、低速的移动计算、移动因特网和位置服务，第三代系统将以基于视频的全球范围内高速多媒体服务和移动IT为特征。在未来的后3G系统中，这些服务都将以虚拟永远在线的方式无缝、高速地普遍提供。     

Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

Lattice parameter determination of a strained area of an InAs layer on a GaAs substrate using CBED

All the six lattice parameters (a, b, c, alpha, beta and gamma) of a strained area of an InAs layer grown on a GaAs substrate were determined without any assumption of the crystal lattice symmetry from the higher-order Laue zone (HOLZ) lines appearing in one convergent-beam electron diffraction (CBED) pattern. The analysis was performed with three steps. Firstly, the parameters alpha and beta were determined from the deviations of the HOLZ lines from the mirror symmetry perpendicular to the [001] direction. Secondly, the parameter c was determined from the distance between the intersections of the HOLZ lines, which have the same h and k indices but different l indices. Finally, the parameters a, b and gamma were determined simultaneously from several distances between the intersections of the HOLZ lines. The lattice parameters determined for the strained area were a = 0.611(2) nm, b = 0.615(1) nm, c = 0.6119(7) nm, alpha = 89.5(1) degrees, beta = 89.0(2) degrees and gamma = 89.1(2) degrees. This result implies that the cubic lattice of InAs is elongated approximately in the [111] direction and the exact lattice symmetry is triclinic. The same analysis procedure was applied to another two specimen areas. It was found that the areas have orthorhombic distortions with lattice parameters a = 0.607(2) nm, b = 0.604(1) nm and c = 0.6085(7) nm for one area, and with a = 0.607(2) nm, b = 0.605(1) nm and c = 0.6065(7) nm for the other area. It is should be emphasized that the present analysis of lattice distortions is immediately applicable to the other semiconductors, such as Si, SiGe or GaAs layers, without assuming any crystal system.     

Detection of characteristic signals from as-doped (<1 at.%) regions of silicon by transmission electron microscopy and convergent-beam electron diffraction

Characteristic signals were detected from As-doped (< 1 at.%) regions of silicon by dark-field transmission electron microscopy and convergent-beam electron diffraction. A slight intensity increase was observed in 220 dark-field images, which may be explained by an increase of scattering amplitude due to the As doping. The doped region showed a much higher intensity in 004 dark-field images. The characteristic high intensity was observed for specimens with As concentrations of about 0.09-0.8 at.%. Convergent-beam electron diffraction patterns obtained from the As-doped region showed a characteristic rocking curve for 004 reflection. These characteristics should originate from incoherent elastically scattered electrons due to a static lattice distortion around the doped As atoms. The observed characteristics in dark-field images and rocking curves of the 004 reflection should be a good probe not only for investigating the concentration of doped atoms in Si lattice, but also for the amount of impurity and/or point defects in other crystalline materials.