硬聚氯乙烯低发泡挤出成型研究

采用自由发泡挤出的方法研究了硬聚氯乙烯低发泡挤出成型的配方设计和工艺条件控制。讨论了稳定剂品种，改性剂品种和发泡剂用量对制品密度，泡孔结构以及外观表面的影响。还揭示了口模温度和螺杆转速与制品密度的关系。     

提高丙烯和混合碳四产品收率的对策与措施

中国石油化工股份有限公司茂名分公司化工事业部乙烯装置随着运行周期的延长，高低压脱丙烷塔和脱丁烷塔结垢严重，分离效果变差，造成丙烯和混合碳四产品的收率降低。通过分析丙烯和混合碳四产品损失大、收率低的原因，提出对策并采取相应措施，从而有效地提高了丙烯和混合碳四产品的收率。     

三芳基甲烷树脂的磁性行为

介绍了ＢＡ／Ｐｙ，ＢＡ／Ｐｈ和ＰＨＢＡ三种具有三芳基甲烷结构Ｂ阶树脂的合成方法及分子链的单元结构形式。对用紫外光和激光照射法进行脱氢反应的实验条件及脱氢化后树脂的磁性能（磁滞现象，矫顽力和磁化强度）进行考查。     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

发酵法生产甘油的技术经济评述

介绍了甘油的国内外市场状况及发酵法生产甘油的技术进展，对１０００ｔ／ａ的发酵法甘油装置进行了经济评价。     

Evaluation of PLGA/chitosan/HA conduits for nerve tissue reconstruction

A micro-envioment for nerve cells and tissue growth were designed and constructed via surface modification of poly(L-lactide-co-glycolide)(PLGA) with chitosan and hydroxyapatite(HA). The poly(L-lactide-co-glycolide)/chitosan/hydroxyapatite (PLGA/chitosan/HA) conduits were manufactured by a combined solvent casting and particulate leaching technique. The conduits were highly porous with an interconnected pore structure and 76.5% porosity. Micropores with 50–100 micrometer diameter were formed in the conduits. In vivo application of PLGA/chitosan/HA conduits for reconstruction of 10 mm sciatic nerve defect was assessed by the walking track analysis, the quantifying of the wet weight of tibialis anterior muscle and the histological assessment. The conduits in host rats in vivo can not only be an effective in promoting regenerating of nerves but can also lead to favorable nerve functional recovery. Funded by the National Natural Science Foundation of China(No.50774096)     

退火温度对铜纳米颗粒复合材料的三阶非线性光学性质的影响

采用离子注入法制备铜纳米颗粒复合材料,在波长为790 nm的入射激光作用下,运用Z-扫描技术测量了铜纳米颗粒复合材料的非线性光学折射率和非线性光学吸收系数,分析了退火温度对铜纳米颗粒复合材料光学性质的影响。结果表明,随着退火温度的升高,铜纳米颗粒复合材料的颗粒尺寸明显增大,且光学非线性折射率上升。通过改变非晶二氧化硅中铜纳米颗粒复合材料的形状,得到不同的三阶非线性光学系数的特定值。     

Growth and characterization of indium doped zinc oxide films sputtered from powder targets

Indium doped Zn O films were grown on quartz glass substrates by radio frequency magnetron sputtering from powder targets. Indium content in the targets varied from 1at% to 9at%. In doping on the structure, optical and electrical properties of Zn O thin films were studied. X-ray diffraction shows that all the films are hexagonal wurtzite with c-axis perpendicular to the substrates. There is a positive strain in the films and it increases with indium content. All the films show a high transmittance of 86% in the visible light region. Undoped Zn O thin film exhibits a high transmittance in the near infrared region. The transmittance of indium doped Zn O thin films decreases sharply in the near infrared region, and a cut-off wavelength can be found. The lowest resistivity of 4.3×10~(-4) Ω·cm and the highest carrier concentration of 1.86×10~(21) cm~(-3) can be obtained from Zn O thin films with an indium content of 5at% in the target.     

基于CS5463的双流制机车电度表设计

设计一种基于CS5463的双流制机车电度表。介绍了双流制电度表的技术性能、总体结构以及程序设计方法,通过对电能计量模块、中央处理模块、双路供电设备以及GPRS与RS485通信模块进行设计,实现机车交流与直流的显示、与TAX2机车监控装置通信以及远程无线抄表功能。采用型式试验、例行试验对新研制的双流制机车电度表进行测试,试验结果表明,该电度表具有制造成本低、数据处理能力强、安全保障度高、测量精度高、抗干扰能力强等优点。