Fatal respiratory obstruction due to round worm

Respiratory obstruction caused by a round worm is rate. A fatal case of the complication in a three-year-old child was encountered at the Nehru Hospital attached to the Postgraduate Institute of Medical Education and Research, Chandigarh, India.     

Effect of Nb doping on structural and electric properties of PZT (65/35) ceramic

The aim of this study is to determine the effect of Nb⁵⁺ doping on PZT (65/35) based bulk materials in their structure, micro structure and electrical properties. The Nb content was chosen 0-9 mole%. These materials were prepared by conventional mixed oxide method. X ray diffraction studies suggest the compound to be of rhombohedral perovskite phase. Excess addition of Nb result in pyrochlore and fluorite phase develops in PZT (65/35) sample. Detailed studies of dielectric constant as a function of temperature (40degC to 500degC) and frequency (100 Hz to 1 MHz) suggest that the compounds undergo diffuse type of phase transition. Maximum dielectric constant and resistivity were found to be strongly dependent on doping and measuring frequencies. Using complex impedance analysis micro structural parameters such as bulk and grain boundary resistance, bulk charge carrier concentration and relaxation time were determined     

New grounded and floating memristor emulators using OTA and CDBA

In this paper, grounded and floating decremental/incremental memristor emulators have been proposed by using an operational transconductance amplifier (OTA), current differencing buffered amplifier (CDBA), and a grounded capacitor. The proposed memristor emulators are simpler in design over most of the realizations of memristor emulators available in the literature. The proposed configurations of grounded and floating decremental memristor emulators can be easily converted into grounded and floating incremental memristor emulators. The pinched hysteresis loops obtained from proposed memristor emulators are maintained up to 1-MHz frequency in both decremental and incremental configurations. Simulation results have been obtained using a Mentor Graphics Eldo simulation tool in 0.18-μm complementary metal-oxide semiconductor (CMOS) technology parameters. Analog filters have also been designed to verify the performance of proposed grounded and floating memristor emulators.     

A systematic investigation of the integrated effects of gate underlapping,dual work functionality and hetero gate dielectric for improved performance of CP TFETs

This paper presents a comparative analysis of the combined effects of gate underlapping and dual work functionality with hetero gate dielectric engineering for a charge plasma tunnel field-effect transistor (CP TFET). Ultrathin nanoscale devices, despite their size and cost advantage, present serious issues, including doping control, random dopant fluctuation and fabrication complexity. Given these concerns, the concept of charge plasma is introduced to avoid the need for conventional doping for the formation of the source and drain regions, which makes the device resistive to process variation. Conduction for negative gate bias (ambipolarity), excess Miller capacitance (gate-to-drain capacitance) and poor RF performance in TFETs are addressed by the use of gate underlapping from the drain side. In addition, enhanced ON-state current is obtained by work function shifting (dual work functionality). This shift in work function can be accomplished by nitrogen doping of the gate electrode for experimental levels [1]. The combined effects of the underlap and dual work function are seen in the device having a single gate dielectric. However, the ON-state current remains lower in the case of \(\mathrm{SiO}_{2}\) as the gate dielectric. Therefore, a hetero gate dielectric \(\mathrm{SiO}_{2}\) on the drain side and \(\mathrm{HfO}_{2}\) on the source side are considered in order to improve the RF parameters and enhance the ON-current concept, respectively. Finally, the combined effects of gate underlap with work function shift and hetero dielectric are analyzed in CP TFETs. The results show that proper underlap length and gate work function provide a significant improvement in device performance. Therefore, optimization of the underlap length and work function is performed to determine the specific work function that provides overall enhancement of DC and analog/RF performance of the device. In addition, optimization of the dual work function gate length is demonstrated.     

Self-cleaning performance of sol–gel-derived TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> double-layer thin films

The self-cleaning properties of the TiO₂/SiO₂ double-layer films prepared by sol–gel method were investigated. Thin films were prepared by spin coating onto glass and then thermally treated at different temperatures, and characterized using X-ray diffraction, atomic force microscopy, field emission scanning electron microscopy, and UV–visible spectroscopy. The cross-sectional structure of the films was observed by FESEM. The surface roughness of the films was characterized by AFM. The root mean square surface roughness of the thin films was below 2 nm, which should enhance their optical transparency. The photo-induced hydrophilicity of the films was evaluated by water contact angle measurement in air. The photocatalytic activity of the films was studied by the photocatalytic degradation of methylene blue under UV light irradiations. The TiO₂/SiO₂ double-layer thin films are plausibly applicable to developing self-cleaning materials in various applications such as windows, solar panels, cement, and paints.     

Epoxidized soybean oil modified using fatty acids as tougheners for thermosetting epoxy resins: Part 1

A series of bio-rubber (BR) reactive tougheners for thermosetting epoxy resins was prepared by grafting renewable saturated fatty acids of different chain lengths (C6-C14) onto epoxidized soybean oil (ESO) at varying molar ratios. The tunable nature of the BR systems derives from the architecture and functionality of naturally occurring molecules. Control of BR reactivity and molecular weight by varying the degree of grafting and the chain length of the fatty acid was demonstrated. The BR-toughened samples were prepared by blending BRs with diglycidyl ether of bisphenol A (DGEBA), Epon 828, and stoichiometrically curing the mixture using an aromatic amine hardener, diethyl toluene diamine (Epikure W). Fracture surface morphology studies showed that tuning of phase separated particle sizes was possible depending on the BR type and weight fraction. The resulting toughening effect was evaluated by measuring the fracture toughness of control and toughened polymer samples. The use of BRs significantly improved the critical strain energy release rate and critical stress intensity factor values of thermosetting polymer samples without significantly reducing T_g and modulus. In addition to toughening and adding renewable content to petroleum-based thermosetting epoxy systems these new tougheners have low viscosity compared to common alternatives and aid ease of processing.     

Epoxidized soybean oil modified using fatty acids as tougheners for thermosetting epoxy resins: Part 2—Effect of curing agent and epoxy molecular weight

A series of bio-rubber (BR) tougheners for thermosetting epoxy resins was prepared by grafting renewable fatty acids with different chain lengths onto epoxidized soybean oil at varying molar ratios. BR-toughened samples were prepared by blending BRs with diglycidyl ether of bisphenol A resins, Epon 828 and Epon 1001F, at different weight fractions and stoichiometrically cured using an amine curing agent, 4, 4′-methylene biscyclohexanamine (PACM). Fracture toughness properties of the unmodified and BR toughened polymer samples—including critical strain energy release rate (G_Ic), and critical stress intensity factor (K_Ic)—were measured to investigate the toughening effect of prepared BRs. It was found that the degree of phase separation and toughening were more controllable relative to similar polymers cured using the aromatic curing agent Epikure W, and the use of higher molecular epoxy resins produces a synergistic effect increasing the toughness much more than similar polymers made with lower molecular weight epoxy resins. Average BR domain sizes ranging from 200 to 900 nm were observed, and formulations with G_Ic, values K_Ic as high as 1.0 kJ/m² and 1.4 MPa m^1/2 were attained respectively for epoxy systems with T_g greater than 130°C.     

Bitter Taste Receptor T2R14 Modulates Gram-Positive Bacterial Internalization and Survival in Gingival Epithelial Cells

Bitter-taste receptors (T2Rs) have emerged as key players in host–pathogen interactions and important modulators of oral innate immunity. Previously, we reported that T2R14 is expressed in gingival epithelial cells (GECs) and interacts with competence stimulating peptides (CSPs) secreted by the cariogenic Streptococcus mutans. The underlying mechanisms of the innate immune responses and physiological effects of T2R14 on Gram-positive bacteria are not well characterized. In this study, we examined the role of T2R14 in internalization and growth inhibitory effects on Gram-positive bacteria, namely Staphylococcus aureus and S. mutans. We utilized CRISPR-Cas9 T2R14 knockdown (KD) GECs as the study model to address these key physiological mechanisms. Our data reveal that the internalization of S. aureus is significantly decreased, while the internalization of S. mutans remains unaffected upon knockdown of T2R14 in GECs. Surprisingly, GECs primed with S. mutans CSP-1 resulted in an inhibition of growth for S. aureus, but not for S. mutans. The GECs infected with S. aureus induced T2R14-dependent human β-defensin-2 (hBD-2) secretion; however, S. mutans–infected GECs did not induce hBD-2 secretion, but induced T2R14 dependent IL-8 secretion. Interestingly, our results show that T2R14 KD affects the cytoskeletal reorganization in GECs, thereby inhibiting S. aureus internalization. Our study highlights the distinct mechanisms and a direct role of T2R14 in influencing physiological responses to Gram-positive bacteria in the oral cavity.