Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

Ionene segmented block copolymers containing imidazolium cations: Structure-property relationships as a function of hard segment content

Imidazolium ionene segmented block copolymers were synthesized from 1,1′-(1,4-butanediyl)bis(imidazole) and 1,12-dibromododecane hard segments and 2000 g/mol PTMO dibromide soft segments. The polymeric structures were confirmed using ¹H NMR spectroscopy, and resonances associated with methylene spacers from 1,12-dibromododecane became more apparent as the hard segment content increased. TGA revealed thermal stabilities ≥250 °C for all imidazolium ionene segmented block copolymers. These ionene segmented block copolymers containing imidazolium cations showed evidence of microphase separation when the hard segment was 6-38 wt%. The thermal transitions found by DSC and DMA analysis found that the T_g and T_m of the PTMO segments were comparable to PTMO polymers, namely approximately −80 °C and 22 °C, respectively. In the absence of PTMO soft segments the T_g increased to 27 °C The crystallinity of the PTMO segments was further evidence of microphase separation and was particularly evident at 6, 9 and 20 wt% hard segment, as indicated in X-ray scattering. The periodicity of the microphase separation was well-defined at 20 and 38 wt% hard segment and found to be approximately 10.5 and 13.0 nm, respectively, for these ionenes wherein the PTMO soft segment is 2000 g/mol. Finally, the 38 and 100 wt% hard segment ionenes exhibited scattering from correlations within the hard segment on a length scale of approximately 2-2.3 nm. These new materials present structure on a variety of length scales and thereby provide various routes to controlling mechanical and transport properties.     

Dietary Fish Oil Alters DNA Methylation of Genes Involved in Polyunsaturated Fatty Acid Biosynthesis in Muscle and Liver of Atlantic Salmon (Salmo salar)

Adequate dietary supply of eicosapentaenoic acid (20:5n-3) and docosahexaenoic acid (22:6n-3) is required to maintain health and growth of Atlantic salmon (Salmo salar). However, salmon can also convert α-linolenic acid (18:3n-3) into eicosapentaenoic acid (20:5n-3) and docosahexaenoic acid (22:6n-3) by sequential desaturation and elongation reactions, which can be modified by 20:5n-3 and 22:6n-3 intake. In mammals, dietary 20:5n-3 + 22:6n-3 intake can modify Fads2 expression (Δ6 desaturase) via altered DNA methylation of its promoter. Decreasing dietary fish oil (FO) has been shown to increase Δ5fad expression in salmon liver. However, it is not known whether this is associated with changes in the DNA methylation of genes involved in polyunsaturated fatty acid synthesis. To address this, we investigated whether changing the proportions of dietary FO and vegetable oil altered the DNA methylation of Δ6fad_b, Δ5fad, Elovl2, and Elovl5_b promoters in liver and muscle from Atlantic salmon and whether any changes were associated with mRNA expression. Higher dietary FO content increased the proportions of 20:5n-3 and 22:6n-3 and decreased Δ6fad_b mRNA expression in liver, but there was no effect on Δ5fad, Elovl2, and Elovl5_b expression. There were significant differences between liver and skeletal muscle in the methylation of individual CpG loci in all four genes studied. Methylation of individual Δ6fad_b CpG loci was negatively related to its expression and to proportions of 20:5n-3 and 22:6n-3 in the liver. These findings suggest variations in dietary FO can induce gene-, CpG locus-, and tissue-related changes in DNA methylation in salmon.     

Canada’s energy perspectives and policies for sustainable development

A regression analysis is performed to make projections for the Canadian energy production and consumption. These have been increasing and are projected to increase even further in the near future. The primary energy production and consumption are projected to increase by 52% and 34%, respectively, by 2025 over 2004 if business as usual. The amount of fossil energy resources is finite and the extraction, transportation and combustion of fossil fuels cause environmental pollution and climate change. On the other hand, energy plays an important role in the economic and social development of Canada. Canada can develop further from an energy balance point of view, but this alone cannot be sustainable, because of the negative consequences of the major energy use on the environment. Application of energy localization and diversification is a promising solution, but in order to reach that, better energy efficiency and more use of renewable energy are necessary. Instead of non-compulsory policies Canada’s policy approach should have more compulsory policies. Only then Canada can be made to develop further in a sustainable manner.     

Microcellular foaming of polypropylene containing low glass transition rubber particles in an injection molding process

Microcellular foams in polypropylene containing rubber particles were produced in an injection molding process. The foams are generated because of the thermodynamic instability and are controlled by formation process. The effect of processing parameters on microcellular foaming was investigated in the injection molding process. Injection speed and pressure are less important factors but packing pressure plays an important role in controlling the foam density. A critical packing pressure, about 5 × 10⁶ Pa, was found to generate microcellular foams in our polypropylene material system. Rubber particles inside the polypropylene seem to stabilize the microcellular foams.     

Influence of coal thermoplastic properties on coking pressure generation: Part 2 - A study of binary coal blends and specific additives

A number of coal blends and pitch/coal blends were evaluated using rheometry, thermogravimetric analysis and microscopy to confirm and further elucidate the coking pressure mechanism previously proposed by Duffy et al. (2007) [1]. We confirm that blending a low rank, high fluidity, low coking pressure coal, with a high rank, low fluidity, high coking pressure coal can significantly reduce the coking pressure associated with the latter. Interestingly, blending does not necessarily result in a fluidity that is midway between that of the two coals; sometimes the fluidity of the blend is less than that of the low fluidity coal, especially when the coals are significantly different in rank. This occurs because the increase in complex viscosity (η*) through resolidification of the low rank, high fluidity coal counteracts the reduction in η* resulting from softening of the high rank, low fluidity coal. It has also been confirmed that the η* of the resultant blend can be estimated from the η* of each component coal using a logarithmic additivity rule commonly employed for polymer blends.Polarised light microscopy has indicated that the degree of mixing between coals of different rank is minimal, with fusion restricted to the particle surface. It is therefore inappropriate to think of such a coal blend in the same way as a single coal, since each component coal behaves relatively independently. This limited fusion is important for understanding the coking pressure mechanism for blends. It is proposed here that the lower rank coal, which softens at lower temperature, is able to expand into the interparticle voids between the high rank coal that is yet to soften, and these voids can create channels for volatiles to traverse. Then, and importantly, when the high rank coal begins to expand, the pore structure developed in the resolidified structures of the low rank coal can facilitate removal of volatiles, while the resolidified material may also act as a suitable sorbent for volatile matter. This is considered to be the primary mechanism by which coal blending is able to alleviate coking pressure, and applies to addition of inert material also.Addition of a coal tar pitch was found to increase fluidity but also to extend the thermoplastic range to lower temperatures. This caused an increase in the swelling range, which was accompanied by a long plateau in η*, a feature which has previously been observed for certain high fluidity, high pressure coals. Elasticity and η* at the onset of expansion were also higher for both the pitch impregnated coals and the high pressure blends, which supports previous findings for singly charged high pressure coals, and confirms the potential use of such criteria for identifying potentially dangerous coals/blends.     

Enhancing saccharification of Agave tequilana bagasse by oxidative delignification and enzymatic synergism for the production of hydrogen and methane

Agave tequilana bagasse is a suitable lignocellulosic residue for energy production. However, the presence of lignin and the heterogeneous structure of hemicellulose may hinder the availability of polysaccharides. In this work, the pretreatment of A. tequilana bagasse with alkaline hydrogen peroxide (AHP) followed by enzymatic saccharification with hemicellulases and cellulases was assessed for the removal of lignin and extraction of fermentable sugars, respectively. Results of the AHP pretreatment indicated that it is possible to attain up to 97% delignification and recover 88% of cellulose and hemicellulose after only 1.5 h of treatment. Regarding the saccharification process, the total sugar yield and productivity were both increased by 2-fold using an enzymatic mixture (cellulases + hemicellulases) compared to single enzyme hydrolysis (cellulases), evidencing synergism. Further evaluation of the hydrolyzates as substrate for hydrogen and methane production, resulted in yields 1.5 and 3.6-times (215.14 ± 13 L H₂ and 393.4 ± 13 L CH₄ per kg bagasse, respectively) superior to those obtained with hydrolyzates of non-pretreated bagasse processed with a single enzyme. Overall, using AHP pretreatment and subsequent hydrolysis with enzymatic mixtures improves the saccharification of A. tequilana bagasse enhancing the production of hydrogen and methane.     

Effective components of TORDIA cognitive–behavioral therapy for adolescent depression: Preliminary findings.

In this report, we conducted a secondary analysis of the Treatment of SSRI-Resistant Depression in Adolescents (TORDIA) study to explore the impact of specific cognitive–behavioral therapy (CBT) treatment components on outcome. In TORDIA, 334 youths (ages 12 to 18 years) with major depressive disorder who had failed to respond to an adequate course of selective serotonin reuptake inhibitor (SSRI) medication were randomized to a medication switch (either to an alternative SSRI or venlafaxine) with or without 12 weeks of adjunctive CBT. Participants who had more than 9 CBT sessions were 2.5 times more likely to have adequate treatment response than those who had 9 or fewer sessions. CBT participants who received problem-solving and social skills treatment components, controlling for number of sessions and other confounding variables, were 2.3 and 2.6 times, respectively, more likely to have a positive response. These preliminary findings underscore the importance of receiving an adequate number of sessions to attain an adequate clinical response. Finally, social skills and problem solving may be active elements in CBT for adolescent depression and should be considered in treatment by those working with seriously depressed youths. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dissemination of the Coping Power program: Importance of intensity of counselor training.

This study examined an important but rarely investigated aspect of the dissemination process: the intensity of training provided to practitioners. Counselors in 57 schools were randomly assigned to 1 of 3 conditions: Coping Power–training plus feedback (CP-TF), Coping Power–basic training (CP-BT), or a comparison condition. CP-TF counselors produced reductions in children’s externalizing behavior problems and improvements in children’s social and academic skills in comparison to results for target children in both the comparison and the CP-BT conditions. Training intensity was critical for successful dissemination, although the implementation mechanism underlying this effect remains unclear, as condition effects were not significant for completion of session objectives but were significant for the quality of counselors’ engagement with children. (PsycINFO Database Record (c) 2010 APA, all rights reserved)