The development of poly(vinyl chloride) extrusions for a 14,000‐ton self‐supporting structure for the detection of neutrinos

The NOvA Neutrino Experiment has built a one‐of‐a‐kind self‐supporting plastic structure, potentially the largest ever built. The poly(vinyl chloride) (PVC) structure serves as a neutrino detector and is composed of 28 individual blocks that measure 15.5 m (51 feet) high by 15.5 m (51 feet) wide by 2.1 m (7 feet) deep. The primary parts in the detector construction are 15.5‐m (51‐foot), 16‐cell PVC extrusions. These extrusions form the basis of the detector modules, which are laminated together in a crossed pattern to form the individual blocks and then filled with (mineral oil)–based liquid scintillator. The self‐supporting nature of the detector places important structural requirements on both the PVC formulation and the extrusions. Block assembly requirements impose narrow geometric tolerances. Because of the method of detecting neutrinos, the extrusions must possess exceptionally high reflectivity over a particular wavelength range. This requirement places additional restrictions on the components of the PVC formulation. Altogether, the PVC extrusions have to maintain important reflectivity characteristics, provide structural support to the detector, and meet relatively tight geometric requirements for assembly. In order to meet these constraints, a custom PVC formulation had to be created and extruded. We describe the purpose and requirements of the NOvA detector leading to the production of our unique PVC extrusion, summarize the research and development process, and discuss the lessons learned. J. VINYL ADDIT. TECHNOL., 22:368–376, 2016. © 2014 Society of Plastics Engineers     

Mass production of carbon nanotube‐reinforced polyacrylonitrile fine composite fibers

A facile and large‐scale production method of polyacrylonitrile (PAN) fibers and carboxyl functionalized carbon nanotube reinforced PAN composite fibers was demonstrated by the use of Forcespinning® technology. The developed polymeric fibers and carbon nanotube‐reinforced composite fibers were subsequently carbonized to obtain carbon fiber systems. Analysis of the fiber diameter, homogeneity, alignment of carbon nanotube and bead formation was conducted with scanning electron microscopy. Thermogravimetric analysis, electrical, and mechanical characterization were also conducted. Raman and FTIR analyses of the developed fiber systems indicate interactions between carbon nanotubes and the carbonized PAN fibers through π–π stacking. The carbonized carbon nanotube‐reinforced PAN composite fibers possess promising applications in energy storage applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40302.     

Polyampholyte acrylic latexes for tablet coating applications

Polyampholyte latexes can exist within a certain pH range as low‐viscosity aqueous dispersions, while upon a pH shift to the vicinity of the isoelectric point they undergo ionic coacervation. Three classes of coacervation latexes were synthesized and evaluated for their suitability for use in tablet coating applications. Pharmaceutical tablet coatings are commonly based on hydroxypropyl methyl cellulose, poly(vinyl alcohol), and acrylic polymers. Because of the high viscosity of their aqueous solutions, and to the consequent required low concentrations of the tablet coating polymers in the coating solutions to enable sufficiently low viscosity for effective spray application, the current commercial pharmaceutical tablet coating technology requires the removal of large amounts of water during the manufacturing process. In this work, films prepared from high‐solids, low‐viscosity coacervated acrylic latexes showed good hardness, very low tackiness, an excellent combination of optical properties, and very low water vapor permeability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40049.     

Metal-Organic Frameworks as Selective or Chiral Oxidation Catalysts

Since the discovery of Metal Organic Frameworks (MOFs) in the early 1990s, the amount of new structures has grown exponentially. A MOF typically consists of inorganic nodes that are connected by organic linkers to form crystalline, highly porous structures. MOFs have attracted a lot of attention lately, as the versatile design of such materials holds promises of interesting applications in various fields. In this review, we will focus on the use of MOFs as heterogeneous oxidation catalysts. MOFs are very promising candidates to replace homogeneous catalysts by sustainable and stable heterogeneous catalysts.

The catalytic active function can be either the active metal sites of the MOF itself or can be introduced as an extra functionality in the linker, a dopant or a “ship-in-a-bottle” complex. As the pore size, pore shape, and functionality of MOFs can be designed in numerous ways, shape selectivity, and even chiral selectivity can be created. In this article, we will present an overview on the state of the art of the use of MOFs as a heterogeneous catalyst in liquid phase oxidation reactions.     

Reactive,nonreactive, and flash spark plasma sintering of Al2O3/SiC composites—A comparative study

The influence of different SPS-based methods, that is, conventional spark plasma sintering (SPS), flash SPS (FSPS), and reactive SPS (RSPS) on the properties of Al₂O₃/SiC composite was investigated. It was shown that the application of preliminary high energy ball milling of the powders significantly enhances the sinterability of the ceramics. It was also demonstrated that FSPS provides unique conditions for rapid, that is, less than a minute, consolidation of refractory ceramics. The Al₂O₃-20 wt% SiC composite produced by FSPS possesses the highest relative density (~99%), fracture toughness (7.5 MPa m^1/2), hardness (20.3 GPa) and wear resistance among all ceramics produced by other SPS-based approaches with dwelling time 10 minutes. The RSPS ceramics hold the highest Young's modulus (390 GPa). Substitution of micron-sized Al₂O₃ particles by nano alumina does not lead to measurable enhancement of the mechanical properties.     

Two-Dimensional Nuclear Magnetic Resonance Studies of Starch and Starch Products

The use of two-dimensional Nuclear Magnetic Resonance (NMR) spectroscopy as applied to studies of starch, starch products and glycogen is reported. The use of both homonuclear correlation (COSY, relay-COSY and HOHAHA) and heteronuclear correlation (HMQC, HETCOR) experiments is discussed. This approach makes it possible to obtain complete assignments of the proton NMR spectra of these polysaccharides. This is not possible from 1-D spectra due to excessive overlap of the non-anomeric proton signals. The resulting assignments are useful in obtaining structural information regarding starch and related products. Moreover, the greater inherent resolution of the two-dimensional spectra can reveal the presence of low molecular weight carbohydrates (glucose, maltose etc.) in dextrin samples, thus providing information about carbohydrate composition.     

Influence of coal thermoplastic properties on coking pressure generation: Part 2 - A study of binary coal blends and specific additives

A number of coal blends and pitch/coal blends were evaluated using rheometry, thermogravimetric analysis and microscopy to confirm and further elucidate the coking pressure mechanism previously proposed by Duffy et al. (2007) [1]. We confirm that blending a low rank, high fluidity, low coking pressure coal, with a high rank, low fluidity, high coking pressure coal can significantly reduce the coking pressure associated with the latter. Interestingly, blending does not necessarily result in a fluidity that is midway between that of the two coals; sometimes the fluidity of the blend is less than that of the low fluidity coal, especially when the coals are significantly different in rank. This occurs because the increase in complex viscosity (η*) through resolidification of the low rank, high fluidity coal counteracts the reduction in η* resulting from softening of the high rank, low fluidity coal. It has also been confirmed that the η* of the resultant blend can be estimated from the η* of each component coal using a logarithmic additivity rule commonly employed for polymer blends.Polarised light microscopy has indicated that the degree of mixing between coals of different rank is minimal, with fusion restricted to the particle surface. It is therefore inappropriate to think of such a coal blend in the same way as a single coal, since each component coal behaves relatively independently. This limited fusion is important for understanding the coking pressure mechanism for blends. It is proposed here that the lower rank coal, which softens at lower temperature, is able to expand into the interparticle voids between the high rank coal that is yet to soften, and these voids can create channels for volatiles to traverse. Then, and importantly, when the high rank coal begins to expand, the pore structure developed in the resolidified structures of the low rank coal can facilitate removal of volatiles, while the resolidified material may also act as a suitable sorbent for volatile matter. This is considered to be the primary mechanism by which coal blending is able to alleviate coking pressure, and applies to addition of inert material also.Addition of a coal tar pitch was found to increase fluidity but also to extend the thermoplastic range to lower temperatures. This caused an increase in the swelling range, which was accompanied by a long plateau in η*, a feature which has previously been observed for certain high fluidity, high pressure coals. Elasticity and η* at the onset of expansion were also higher for both the pitch impregnated coals and the high pressure blends, which supports previous findings for singly charged high pressure coals, and confirms the potential use of such criteria for identifying potentially dangerous coals/blends.     

Evaluation of a statewide foodborne illness complaint surveillance system in Minnesota, 2000 through 2006

Foodborne outbreaks are detected by recognition of similar illnesses among persons with a common exposure or by identification of case clusters through pathogen-specific surveillance. PulseNet USA has created a national framework for pathogen-specific surveillance, but no comparable effort has been made to improve surveillance of consumer complaints of suspected foodborne illness. The purpose of this study was to characterize the complaint surveillance system in Minnesota and to evaluate its use for detecting outbreaks. Minnesota Department of Health foodborne illness surveillance data from 2000 through 2006 were analyzed for this study. During this period, consumer complaint surveillance led to detection of 79% of confirmed foodborne outbreaks. Most norovirus infection outbreaks were detected through complaints. Complaint surveillance also directly led or contributed to detection of 25% of salmonellosis outbreaks. Eighty-one percent of complainants did not seek medical attention. The number of ill persons in a complainant's party was significantly associated with a complaint ultimately resulting in identification of a foodborne outbreak. Outbreak confirmation was related to a complainant's ability to identify a common exposure and was likely related to the process by which the Minnesota Department of Health chooses complaints to investigate. A significant difference (P < 0.001) was found in incubation periods between complaints that were outbreak associated (median, 27 h) and those that were not outbreak associated (median, 6 h). Complaint systems can be used to detect outbreaks caused by a variety of pathogens. Case detection for foodborne disease surveillance in Minnesota happens through a multitude of mechanisms. The ability to integrate these mechanisms and carry out rapid investigations leads to improved outbreak detection.