Using Amorphous Phases in the Design of Structural Alloys

The recent discovery that amorphous alloy powders can be prepared by mechanically alloying a mixture of pure crystalline intermetallics is opening new windows to the synthesis of engineering materials. Amorphous powders synthesized by mechanical alloying may find application in the design of structural alloys, high thermal conductivity alloys, and metal-matrix composites.     

The Influence of High Temperature Exposure on the Wear Performance of a Ni Based Alloy PTA Coating

Degradation phenomena like wear and corrosion, may have their effects accelerated as components operate at high temperature. The aim of this work is to make an indirect evaluation of the influence of high temperature exposure on wear behavior of Ni coatings. A Ni-Cr-Mo-W alloy, was deposited with Plasma Transferred Arc (PTA) process. An indirect approach based on the Ahrrenius relationship was used to evaluated long time exposures at high temperatures. To simulate longer exposures at lower temperatures, coatings were exposed to higher temperatures for the same time interval. So coatings were soaked in an air furnace at 650℃, 1000℃ and 1200℃. Metal/metal wear behavior was evaluated by pin-on-disc tests. Pins were removed from the coatings by eletrodischarge machining and rubbed against a VC31 quenched and tempered tool steel. Two sets of wear tests were run at 2m/s, for different loads (0.5, 1.0, 2.0 and 3.0Kg) and for different sliding distances (120, 720, 1080, 1440 and 1800m).Coatings characterization was done by scanning electronic microscopy and Vickers microhardness. Results showed as temperature is increased, coatings wear performance is altered,and this is associated with microstructural changes.     

Job-shop scheduling in a body shop

We study a generalized job-shop problem called the body shop scheduling problem (BSSP). This problem arises from the industrial application of welding in a car body production line, where possible collisions between industrial robots have to be taken into account. BSSP corresponds to a job-shop problem where the operations of a job have to follow alternating routes on the machines, certain operations of different jobs are not allowed to be processed at the same time and after processing an operation of a certain job a machine might be unavailable for a given time for operations of other jobs. As main results we will show that for three jobs and four machines the special case where only one machine is used by more than one job is already $\mathcal NP $ -hard. This also implies that the single machine scheduling problem that asks for a makespan minimal schedule of three chains of operations with delays between the operations of a chain is $\mathcal NP $ -hard. On the positive side, we present a polynomial algorithm for the two job case and a pseudo-polynomial algorithm together with an FPTAS  for an arbitrary but constant number of jobs. Hence for a constant number of jobs we fully settle the complexity status of the problem.     

'Tacitus' project: identifying multi-sensory perceptions in creative 3D practice for the development of a haptic computing system for applied artists

This paper outlines the major motivating factors concerning a novel collaborative project between Edinburgh College of Art and Edinburgh Virtual Environment Centre. The Tacitus project will investigate the use of multi-modal virtual environments, specifically, the haptic (touch) modality, with regards to the creative processes employed by designers working within the field of applied arts. The salient areas of research are described, and the methods by which information regarding these areas will be obtained are considered. Initial investigations have revealed a strong need to mimic the traditional applied artists' workspaces, with co-location of visual and haptic cues a priority.     

Screening of organic contaminants in urban snow

Snowmelt is known to cause peak concentrations of pollutants, which may adversely affect receiving water quality. High concentrations of metals and suspended solids in snow have been reported, whereas studies on organic pollutants are rare. This study aims at investigating the occurrence of anthropogenic organic compounds in urban snow in Gothenburg (Sweden). The most frequently detected organic pollutants in the collected snow samples were polycyclic aromatic hydrocarbons (PAHs), high molecular-weight phthalates, 4-nonylphenol and 4-t-octylphenol. Brominated flame retardants and chlorinated paraffins were only sporadically detected. In several snow samples, the concentrations of specific PAHs, alkylphenols and phthalates were higher than reported stormwater concentrations and European water quality standards. Pollutant source identification and sustainable management of snow are important instruments for the mitigation of organic contaminants in the urban environment.     

Electrochemical studies of octadecanethiol and octanethiol films on variable surface area mercury sessile drops

Octadecanethiol (ODT) and octanethiol (OT) films at the mercury-electrolyte interface are examined using cyclic voltammetry and differential capacitance measurements at a single frequency. A mercury flow-system is used to alter the volume, and therefore, the surface area and surface pressure of the mercury electrode. Manipulation of the mercury electrode's volume enables the introduction and removal of defects in the insulating thiol films. OT and ODT film behavior are contrasted under conditions of expansion and contraction. ODT forms extremely impermeable layers that allow 1000 time less redox probe current than seen on uncoated drops. Expansion of the mercury electrode to increase the electrode surface area produces defects and pinholes in the thiol film. These defects are almost completely removed when the drop is compressed back to its initial surface area. OT also forms insulating films on mercury sessile drops, however these films contain more defects than ODT films. While expansion of an OT-coated mercury drop increases redox probe current, recompression of the drop does not return the film to its initial condition. Pinholes and defects in the OT and ODT films can also be produced by cycling to negative potentials, which produce abrupt stripping peaks.     

Characterization of laser hardened steels by laser induced ultrasonic surface waves

Ultrasonic surface waves are suitable for the characterization of surface hardened materials. This is shown on laser hardened turbine blades. The martensitic microstructure within the surface layer of surface hardened steels has a lower surface wave propagation velocity than the annealed or normalized substrate material. Because the propagation velocity depends on the ratio of layer thickness to wavelengthd/, its measurement allows the determination of the hardening depth. If the surface wave frequency is high enough, the surface wave propagates mainly within the hardened layer. A correlation of the surface wave velocity to the surface hardness has been found. Because the variation of the surface velocity in hardened steels is small, a high measurement accuracy is necessary to obtain the interesting hardening parameters with sufficient certainty. Therefore, a measuring arrangement has been developed where laser pulses, guided by optical fibers to the surface hardened structure, generate simultaneously surface wave pulses at two different positions. The two ultrasonic pulses are received by a piezoelectric transducer. The surface wave velocity is obtained from the time delay between these pulses which is determined by the cross-correlation method. To evaluate simultaneously surface waves with different penetration depths from the same signal acquisition, digital filtering has been used in connection with the cross-correlation.     

The artificial heart and neuromonitoring? Technical and clinical aspects

There is a steady progress in the development of artificial heart and circulatory assist devices. There is also no doubt that further advances in energy systems, materials, and electronics will provide for smaller and more reliable electrically driven blood pumps, but the present engineering design appears to be adequate to provide devices satisfactory for initial clinical use. Due to problems in the availability of suitable donor hearts, the concept of replacing the natural heart with an artificial heart as a "bridge to transplantation" has gained attention in recent years. The present paper shows technical and clinical aspects of multivariable electrophysiologic neuromonitoring in a patient with an artificial heart assist device in the intensive care unit. The data (EEG, 40 Hz brain oscillations, brainstem auditory- and somatosensory evoked potentials) are discussed with respect to the influence of the artificial heart on their quality and reliability. Reasons for artifacts and problems of interpretation are shown.     

Insult, aggression, and the southern culture of honor: An "experimental ethnography."

Three experiments examined how norms characteristic of a "culture of honor" manifest themselves in the cognitions, emotions, behaviors, and physiological reactions of southern White males. Participants were University of Michigan students who grew up in the North or South. In 3 experiments, they were insulted by a confederate who bumped into the participant and called him an "asshole." Compared with northerners (who were relatively unaffected by the insult) southerners were more likely to think their masculine reputation was threatened, more upset (as shown by a rise in cortisol levels), more physiologically primed for aggression (as shown by a rise in testosterone levels), more cognitively primed for aggression, and more likely to engage in aggressive and dominant behavior. Findings highlight the insult–aggression cycle in cultures of honor, in which insults diminish a man's reputation and he tries to restore his status by aggressive or violent behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)