Kinetik der polykondensation von natriumsulfidhydrat und 1,4-dichlorbenzol zu poly(thio-1,4-phenylen)

The kinetics of the polycondensation of sodium sulfide hydrate and 1,4-dichlorobenzene to poly(thio-1,4-phenylene) in 1-methyl-2-pyrrolidone as solvent was studied in a differential scanning calorimeter at temperatures between 220 and 280°C. This polycondensation shows an autocatalytic behavior and the kinetics can be modelled by a first order reaction up to complete conversion. This is explained by the low solubility of sodium sulfide in l-methyl-2-pyrrolidone. The concentration of sodium sulfide is regarded as being constant during the whole course of the reaction. The autocatalytic effect can be explained by the increase of the condensation rate constant at the beginning of polycondensation due to the higher reactivity of the oligomers compared to the monomers. The number- and the weight-average molecular weight of the products formed during the course of the polycondensation can be modelled by means of stochastic methods. A simple model with only two different rate constants of the condensation process is assumed. The concentration of sodium sulfide in the reactive phase is found to be 2–5% of the value of dichlorobenzene at the beginning of the reaction and remains constant nearly until the end of polycondensation.     

Darstellung komplexer Betriebsschlacken des LD-Verfahrens im Quasidreistoffsystem

Aus der Darstellung der Schlackenzusammensetzungen im Quasidreistoffsystem ist die Lage der Schlacken zur Kalksättigungslinie deutlich zu erkennen. Die Sublanzenschlacken lassen den Schlackenweg während der letzten Blasminuten erkennen, durch Bodenspülung und Nachspülen wird eine geringe Annäherung an die Kalksättigungslinie erreicht. Aus der Lage der Schlacken im Quasidreistoffsystem läßt sich der Einfluß der Temperatur auf den Verlauf der Kalksättigung entlang unterschiedlicher T-X-Schnitte bestimmen.     

dc Electrical Degradation of Perovskite-Type Titanates: I, Ceramics

The rate of the resistance degradation of doped SrTiO₃ ceramics is investigated as a function of various external and material parameters. The effects of the mutually interrelated parameters dc voltage, dc electric field, and thickness of the dielectric are described by power laws. Electron microscopic potential contrast studies show a Maxwell-Wagner polarization leading to a concentration of the electric field at the grain boundaries during the degradation. Based on this finding, the voltage step per grain boundary, ΔΘ_gb, is introduced as a rate-determining parameter which allows an explanation of the influence of the grain size on the degradation rate as well as the difference in the power laws for ceramic and single-crystal samples.     

Strategies for collaborative writing and phases of knowledge construction in CSCL environments

Within the framework of research that describes the processes of collaborative knowledge construction in computer-supported collaborative learning (CSCL) environments, the present work has three objectives: (i) the identification of the strategies of six small groups of university students for the elaboration of written products in a CSCL environment; (ii) seek relations between the identified writing strategies and the processes and phases of collaborative knowledge construction in the groups; and (iii) relate these strategies and phases with the learning results obtained by the groups. We carried out a multiple-case study, with the analysis of four different didactic sequences, in two different virtual learning and teaching settings. In each setting, three student groups were studied, where each had to collaboratively develop between four and eight written products. For all the studied groups, the analysis enabled the identification of five types of strategies in the preparation of the elaboration of written products, and four types of phases of collaborative knowledge construction, which are interrelated and also connected with the grades that the groups obtained in each case.     

Experimentelle und analytische Untersuchungen zum Zündverhalten stark verdünnter C2H2/O2-Gemische

Zusammenfassung Das Zündverhalten homogener Gasgemische bestehend aus Argon mit C₂H₂+O₂-Anteilen von 2% wird bei ?quivalenzverh?ltnissen von ϕ=0,2; 0,5; 1,0 und 2,0 hinter Sto?wellen experimentell untersucht. Kriterium für das Ende der Induktionsperiode ist das starke Ansteigen der OH-Konzentration, die durch Absorptions- oder Emissionsverfahren gemessen wird. Die Gaszust?nde sind in einem Temperaturbereich 1000 K≦T≦1560 K bei Drücken zwischen 0,6 und 1,3 bar variiert worden. Die Me?werte lassen sich durch eine Korrelationsgleichung darstellen mit τ in μs und Konzentrationen in mol cm⁻³. Mit Hilfe eines reaktionskinetischen Modells bestehend aus 29 Elementarreaktionen werden Computersimulationen des Zündverhaltens der verschiedenen Gemische durchgeführt. Die übereinstimmung zwischen berechneten und gemessenen OH-Induktionszeiten erscheint zufriedenstellend, wenn man bedenkt, da? keine kinetische Anpassung vorgenommen worden ist.     

Value and limits of μ-CT for nondemineralized bone tissue processing

An experimental approach was performed on 20 giant rabbits to establish the possibilities and limitations of μ-CT for routine processing of nondemineralized bone tissue. Hydroxyapatite (HA) or β-tricalciumphosphate (β-TCP) bead implants or a melange of both, microchambered and solid, were implanted into a standardized and precise defect in the patellar groove. The bone-healing phase was chosen for the histology considering 1 or 2 days, and 2, 3, and 6 weeks. Normal X-ray and μ-CT were applied on all specimens; five specimens in the 6-week stage were additionally processed according to the full range of conventional nondemineralized bone processing methods. μ-CT increased the possibilities of nondemineralized histology with respect to bone morphometry and a complete sequence of sections, thus providing a complete analysis of the bone response. μ-CT was limited in differentiating bone quality, cell analyses, and mineralization stages. The investigation based on normal X-rays is limited to defining integration and excluding the fibrous and bony encapsulation of loose implants. μ-CT allows a 3D evaluation of newly formed bone which is clearly marked against the ceramic implant. It does not allow, however, for the differentiation between woven and lamellar bone, the presentation of the canalicular lacunar system, or on the cell level, revealing canaliculi or details of the mineralization process which can be documented by high-resolution microradiography. Titer dynamics of bone formation remains the domain of polychromatic sequential labeling. The complete sequence of μ-CT slices enhances the possibilities for routine histology, tremendously allowing to the focus on detail histology to topographically well-defined cuts, thus providing more precise conclusions which take into consideration the whole implant.