Transport phenomena in the electrodeionization of cesium from AMP-PAN

Electrodeionization (EDI) of cesium from cesium-sorbed ammonium molybdophosphate-polyacrylonitrile (AMP-PAN) was investigated by passing eluant through the packed bed of ion-exchange resin in an electrodialysis cell. The deionized cesium from the packed bed was recovered in catholyte by migration and in the eluant by convection. Recovery percentage of Cs by migration increased while the recovery by convection decreased with increase in current density from 20 to 40 mA/cm². Increased eluant concentration resulted in low migration percentage of cesium. Increased catholyte concentration had a negligible effect on total recovery. Apparent diffusion coefficients evaluated using the Nernst–Plank relation increased with increase in current density and catholyte concentration while a decreasing trend was observed with increase in eluant concentration.     

Experimental study on the attrition and size distribution of bed material in a recirculating fluidized bed

An experimental study was performed on the attrition of the bed materials in a recirculating fluidized bed (RCFB) using Indian standard (IS) grade I sand (size between 2.0 and 1.0?mm) at ambient conditions. Experiments were performed with superficial air velocity ranging from 7.13 to 9.16?m/s, bed inventory of 7–10?kg, and a spacing of 0.085?m between the jet top and draft tube bottom. The main objective of the study was to investigate the effects of operation time on the attrition and size distribution of sand particles in a RCFB. It was noticed that the prime mode of attrition of bed materials was abrasion, not fragmentation. Reduction in the downcomer bed height was observed with increasing operation time. It indicates that attrition was significant and fines were elutriated out with the fluidizing air. Furthermore, variations in the shape, size, and harmonic diameter of particles were studied with increasing operation time. It has been observed that the coefficient of uniformity and coefficient of curvature showed increasing patterns. It specifies that particles of different size ranges and fines were formed due to attrition of particles. At the end of the operation, it was found that a significant amount of fines was elutriated with fluidizing air from the reactor.     

Novel (phenylethynyl)pyrene-LNA constructs for fluorescence SNP sensing in polymorphic nucleic acid targets

We describe fluorescent oligonucleotide probes labeled with novel (phenylethynyl)pyrene dyes attached to locked nucleic acids. Furthermore, we prove the utility of these probes for the effective detection of single-nucleotide polymorphisms in natural nucleic acids. High-affinity hybridization of the probes and excellent fluorescence responses to single-base mismatches in DNA/RNA targets are demonstrated in model dual-probe and doubly labeled probe formats. This stimulated us to develop two diagnostic systems for the homogeneous detection of a drug-resistance-causing mutation in HIV-1 protease cDNA and RNA gene fragments. Target sequences were obtained by analysis of 200 clinical samples from patients currently receiving anti-HIV/AIDS combination therapy at the Russian Federal AIDS Center. Using these fluorescent oligonucleotides, we were able to detect the target mutation despite all the challenges of the natural targets, that is, the presence of additional mutations, neighboring sequence variation, and low target concentration, which typically reduce binding and effectiveness of sensing by fluorescent oligonucleotides.     

Biosorption of chromium onto Erythrina Variegata Orientalis leaf powder

The biosorption of chromium from an aqueous solution onto Erythrina Variegata Orientalis leaf powder was investigated in batch operations. The equilibrium agitation time was 180 min. The extent of chromium biosorption increased from 74.2% to 86.4% with decrease in biosorbent size from 150 to 45 μm for a dosage of 30 g/L. The biosorption decreased from 99.1 (0.45 mg/g) to 45.5% (1.64 mg/g) with an increase in chromium initial concentration (C _o ) from 22.5 to 180 mg/L. The extent of biosorption was maximum at pH=3. The experimental data were well explained by Langmuir and Redlich-Peterson isotherm models. The biosorption data followed second-order kinetics with a rate constant of 0.078 g/mg-min for 50 g/L of 45 μm size biosorbent. The biosorption was exothermic and feasible. The biosorption was tending towards irreversibility with increasing temperature.     

Synthesis and Characterization of Cadmium Selenide (CdSe) Nanoparticles Using Trigonal Selenium (t-Se) Nanorods as Selenium Source

Cadmium selenide (CdSe) nanoparticles were synthesized through colloidal method in aqueous medium using the reaction intermediates selenium nanorods as selenium source. Trigonal selenium nanorods (t-Se) were synthesized in water by the reduction method in the presence of sodium borohydride at 60?°C using sodium selenite (Na₂SeO₃) as selenium source. These selenium nanorods were further utilized to synthesis cadmium selenide nanoparticles at 100?°C in water. The synthesized nanorods and nanoparticles were characterized using XRD, SEM, TEM and XPS analysis. X-ray diffraction (XRD) analysis shown that the nanorods possess trigonal phase while the nanoparticles possess a cubic zinc blende structure. Scanning electron microscope (SEM) analysis of the prepared hexagonal shaped nanorods reveals the diameter of the nanorods are about 150 nm. Transmission electron microscopy (TEM) analysis shows the size of the synthesized CdSe nanoparticles are about 4–8 nm. X-ray photoelectron spectroscopy (XPS) analysis illustrates the presence of respective elements Cd, Se with its corresponding oxidation states. The activity of nano selenium rods in aqueous solution during the conversion of cadmium selenide nanoparticles was discussed.     

Influence of Undercooling and Nd4Ba2Cu2O10 Content on the Growth Rate of Large-Grain Bulk Nd-Ba-Cu-O Superconductor

The dependence of growth rate on isothermal undercooling and composition has been investigated for Nd-Ba-Cu-O single grains containing various amounts of nonsuperconducting Nd₄Ba₂Cu₂O₁₀ (Nd-422) phase inclusions and fabricated under a 1% O₂ in N₂ atmosphere using a top seeded melt growth technique. The growth rate along the crystallographic c -direction is observed to exceed that along the a / b direction at all undercooling temperatures and exhibits a maximum for a Nd-422 content of ∼10 mol%. The samples have been examined by optical microscopy and the results interpreted within an established planar solidification model.     

Removal of toxic metal Cr(VI) from aqueous solutions using sawdust as adsorbent: Equilibrium, kinetics and regeneration studies

In the present study, a low-cost adsorbent is developed from the naturally and abundantly available sawdust which is biodegradable. The removal capacity of Cr(VI) from aqueous solutions and from the synthetically prepared industrial effluent of electroplating and tannery industries is obtained. The batch experiments are carried out to investigate the effect of the significant process parameters such as initial pH, change in pH during adsorption, contact time, adsorbent amount, and the initial Cr(VI) concentration. The maximum adsorption of Cr(VI) on sawdust is obtained at an initial pH value of 1. The value of pH increases with increase in contact time and initial Cr(VI) concentration. The equilibrium data for the adsorption of Cr(VI) on sawdust is tested with various adsorption isotherm models such as Langmuir, Freundlich, Redlich–Peterson, Koble–Corrigan, Tempkin, Dubinin–Radushkevich and Generalized equation. The Langmuir isotherm model is found to be the most suitable one for the Cr(VI) adsorption using sawdust and the maximum adsorption capacity obtained is 41.5 mg g⁻¹ at a pH value of 1. The adsorption process follows the second-order kinetics and the corresponding rate constants are obtained. Desorption of Cr(VI) from sawdust using acid and base treatment exhibited a higher desorption efficiency by more than 95%. A feasible solution is proposed, for the disposal of the contaminant (acid and base solutions) containing high concentration of Cr(VI) obtained during the desorption process. The interference of other ions which are generally present in the electroplating and tannery industrial effluent streams on the Cr(VI) removal is investigated.     

In situ velocity measurements of very high power ultrasonic additive manufacturing using a photonic Doppler velocimeter

To understand the dynamic structural movements of very high power ultrasonic additive manufacturing, simultaneous in situ velocity measurements of the sonotrode, welding foil and substrate during consolidation were made using a photonic Doppler velocimeter. During consolidation in which the welding foil was successfully bonded to the substrate, the welding foil and substrate had similar vibration phase angles which came into and then out of phase of the sonotrode; in addition to having large changes in relative velocity as the normal force from the sonotrode was applied and then removed. A consolidation pass in which no bonding occurred, consisted of relatively constant velocity amplitude for all structures. The welding foil and sonotrode remained fully coupled and in phase, but was out of phase of the substrate during the entire welding pass. Therefore, by examining velocity and phase data, bonding versus non-bonding conditions can be determined in situ using the photonic Doppler velocimeter system.     

Delamination failures of Stellite hardfacing in power plants: a microstructural characterisation study

In recent years, several incidents of cracking and failures have been observed in Stellite (Stellite is a registered trademark of the Deloro-Stellite Corporation) hardfacing used in valves of modern high temperature combined cycle gas fired power plants. These hardfacing layers are applied as an overlay onto a steel substrate, such as CrMo steel (i.e. Grade 22, WC9) or creep strength enhanced ferritic steel (i.e. Grade 91, C12A). Cracking has been observed in valve components at the Stellite/steel interface and in the weld dilution zone formed between the steel and clad. Ultimately, disbonding or delamination of the weld hardfacing from the valve body occurs and has resulted in collateral damage to components in the plant (such as to the turbine) or valve failure. In this study, the microstructure formed near the Stellite/steel interface is investigated. Based on thermodynamic modelling, microstructure formed at these regions is hypothesised and a simple methodology is proposed to predict the occurrence of these failures.     

Screening of β1- and β2-Adrenergic Receptor Modulators through Advanced Pharmacoinformatics and Machine Learning Approaches

Cardiovascular diseases (CDs) are a major concern in the human race and one of the leading causes of death worldwide. β-Adrenergic receptors (β1-AR and β2-AR) play a crucial role in the overall regulation of cardiac function. In the present study, structure-based virtual screening, machine learning (ML), and a ligand-based similarity search were conducted for the PubChem database against both β1- and β2-AR. Initially, all docked molecules were screened using the threshold binding energy value. Molecules with a better binding affinity were further used for segregation as active and inactive through ML. The pharmacokinetic assessment was carried out on molecules retained in the above step. Further, similarity searching of the ChEMBL and DrugBank databases was performed. From detailed analysis of the above data, four compounds for each of β1- and β2-AR were found to be promising in nature. A number of critical ligand-binding amino acids formed potential hydrogen bonds and hydrophobic interactions. Finally, a molecular dynamics (MD) simulation study of each molecule bound with the respective target was performed. A number of parameters obtained from the MD simulation trajectories were calculated and substantiated the stability between the protein-ligand complex. Hence, it can be postulated that the final molecules might be crucial for CDs subjected to experimental validation.