Analysis of the behavior of transverse walls of socket base connections

This paper presents a theoretical and experimental analysis of socket base connections of precast concrete structures with regard to the behavior of transverse walls. The experimental program included seven specimens, for which the type of interface in contact with cast-in-place concrete, the load eccentricities and the embedded lengths were all varied. A design model was proposed to calculate the reinforcements of the transverse walls. Based on the obtained results, some conclusions can be drawn: (a) The top of the transverse wall on the compression side of the smooth connections and the top of the two transverse walls of the rough connections are submitted to a bending-tension and this tension prevails on the bending; (b) The design model proposed for the calculation of the reinforcement of the transverse wall on the compression side provides the best prediction of the experimental results for all specimens when compared to the current design models; (c) For rough interfaces, the top of the transverse wall on the tension side is more requested than the top of transverse wall on the compression side; (d) The results of the proposed design model for the reinforcement of the transverse wall on the tension side of rough connections were in close agreement with the experimental results.     

A Low-Complexity Universal Scheme for Rate-Constrained Distributed Regression Using a Wireless Sensor Network

We propose a scheme for rate-constrained distributed nonparametric regression using a wireless sensor network. The scheme is universal across a wide range of sensor noise models, including unbounded and nonadditive noise; it has low complexity, requiring simple operations such as uniform scalar quantization with dither and message passing between neighboring nodes in the network, and attains minimax optimality for regression functions in common smoothness classes. We present theoretical results on the tradeoff between the compression rate, communication complexity of encoding, and the MSE and demonstrate empirical performance of the scheme using simulations.     

Voltage unbalance numerical evaluation and minimization

Among a series of parameters, power quality studies are concerned with voltage unbalances, which represent the voltage magnitude and phase deviation from nominal values. In order to determine the influence of the network's parameters on voltage unbalances, and to provide exact solutions to reduce or even eliminate them, the present study develops and presents two methods. First, a sensitivity analysis is used to determine the influence of each parameter, and then analytical solutions are developed in order to provide the changes needed for correction. The quantification index considered is the symmetrical components method.     

Sustainability metrics for eco-technologies assessment, Part II. Life cycle analysis

This work presents a sustainability analysis of CO₂ reuse to produce dimethyl carbonate (DMC) via ethylene oxide (ROUTE A) and via urea methanolysis (ROUTE B). Two different technologies are considered in ROUTE A: reaction followed by separation and reactive distillation. Life cycle analyses of the ROUTES are presented employing sustainability analysis performed in HYSYS process simulator, along with WAR Algorithm. Process economical optimization is performed to maximize the processes profitability. A sustainability function, defined as a 2D indicator involving both economical and environmental aspects, is calculated for the optimized processes. Additional sustainability indexes are evaluated: material index, energy index, and ecoefficiency. The results, under both economical and environmental aspects, show that ROUTE A is the most sustainable. The study also points to the relevance of the frontier set between the domains cradle-to-gate and gate-to-gate in assessing process sustainability during LCA.     

Large area double p–i–n heterostructure for signal multiplexing and demultiplexing in the visible range

Results on the use of a double a-SiC:H p–i–n heterostructure for signal multiplexing and demultiplexing applications in the visible range, are presented.Modulated monochromatic beams together (multiplexing mode), or a single polychromatic beam (demultiplexing mode) impinge in the device and are absorbed, accordingly to their wavelength, giving rise to a time and wavelength dependent electrical field modulation.Red, green and blue pulsed input channels are transmitted together, each one with a specific transmission rate. The combined optical signal is analyzed by reading out, under different applied voltages, the generated photocurrent. Results show that in the multiplexing mode the output signal is balanced by the wavelength and transmission rate of each input channel, keeping the memory of the incoming optical carriers. In the demultiplexing mode the photocurrent is controlled by the applied voltage allowing regaining the transmitted information. An electrical model gives insight into the device operation.     

Thermal analysis in coated cutting tools

This work studies the heat influence in cutting tools considering the variation of the coating thickness and the heat flux. K10 and diamond tools substrate with TiN and Al₂O₃ coatings were used. The numerical methodology utilizes the ANSYS^® CFX software. Boundary conditions and constant thermo physical properties of the solids involved in the numerical analysis are known. To validate the proposed methodology an experiment is used. The TiN and Al₂O₃ coatings did not show satisfying results during a continuous cutting process. It showed a slight reduction in the heat flux for the 10 (µm) TiN and Al₂O₃ coatings.     

Linux real-time framework for fusion devices

A new framework for the development and execution of real-time codes is currently being developed and commissioned at JET. The foundations of the system are Linux, the Real Time Application Interface (RTAI) and a wise exploitation of the new i386 multi-core processors technology.The driving motivation was the need to find a real-time operating system for the i386 platform able to satisfy JET Vertical Stabilisation Enhancement project requirements: 50 μs cycle time. Even if the initial choice was the VxWorks operating system, it was decided to explore an open source alternative, mostly because of the costs involved in the commercial product.The work started with the definition of a precise set of requirements and milestones to achieve: Linux distribution and kernel versions to be used for the real-time operating system; complete characterization of the Linux/RTAI real-time capabilities; exploitation of the multi-core technology; implementation of all the required and missing features; commissioning of the system.Latency and jitter measurements were compared for Linux and RTAI in both user and kernel-space. The best results were attained using the RTAI kernel solution where the time to reschedule a real-time task after an external interrupt is of 2.35 ± 0.35 μs. In order to run the real-time codes in the kernel-space, a solution to provide user-space functionalities to the kernel modules had to be designed. This novel work provided the most common functions from the standard C library and transparent interaction with files and sockets to the kernel real-time modules. Kernel C++ support was also tested, further developed and integrated in the framework.The work has produced very convincing results so far: complete isolation of the processors assigned to real-time from the Linux non real-time activities, high level of stability over several days of benchmarking operations and values well below 3 μs for task rescheduling after external interrupt. From being the alternative option, RTAI has been finally chosen as the platform for the project. A first stable version of the framework has been integrated on the JET system and is already being commissioned. It will be soon be used on the Vertical Stabilisation Enhancement for the Plasma Control Upgrade (PCU) project at JET.     

Scaling Up Wide-Area-Search-Munition Teams

Wide Area Search Munitions are a cross between an unmanned aerial vehicle and a munition. WASM research to develop and test effective human-robot interfaces and scalable team-oriented coordination algorithms have broad applicability to intelligent multiagent systems and human control of them.