Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

Ca-α SiAlON hollow spheres prepared by carbothermal reduction–nitridation from different SiO2 powders

The formation process of hollow spheres composed of nanosized Ca-α SiAlON particles was investigated using SiO₂ starting powders with different characteristics in particle size, shape and crystalline state. TEM observations showed Ca-α SiAlON hollow spheres composed of a large number of nanosized particles in the products prepared at 1450 °C for 120 min in nitrogen. In all systems, the Ca-α SiAlON hollow spheres were always produced through an intermediate Si–Al–Ca–O liquid phase in the same mechanism, regardless of the characteristics of SiO₂ starting powders used. Spherical solid particles consisted of amorphous phase containing Si, Al, Ca, O and a small amount of N were generated at the initial stage of carbothermal reduction–nitridation. These spherical solid particles changed into hollow particles with the progression of the reaction from the liquid phase to the crystalline Ca-α SiAlON with increasing temperature.     

Effect of CeO2 and La2O3 on the Activity of CeO2−La2O3/Al2O3-Supported Pd Catalysts for Steam Reforming of Methane

The effect of the addition of CeO₂ or La₂O₃ on the surface properties and catalytic behaviors of Al₂O₃-supported Pd catalysts was studied in the steam reforming of methane. The FTIR spectroscopy of adsorbed CO and the Pd dispersion suggest the partial coverage of Pd⁰ by ceria or lanthana species. This could lead to the formation of an adduct MPd _x O (M = Ce or La) at the surface of the metal crystallites. The addition of ceria or lanthana resulted in an increase of the turnover rate and specific rate for steam reforming of methane. One possible explanation if that the Pd⁰*Pd^δ+O–M interfacial species (M = Ce or La) are oxidized by H₂O or CO₂, promoting the O* transfer to the metal surface. This could facilitate the removal of C* species from the metal surface, resulting in the increase of specific reaction rate and increase of the accessibility of CH₄ to metal active sites.     

基于图像相关分析的砂土模型试验变形场量测

高分辨率数码相机的出现为砂土模型试验变形场非接触量测法的研究开发提供了一条简便经济而且实用的途径,在模型试验观测面上,不再需要布置嵌入式量测标志点或描画网格,直接用数码相机在试验各阶段拍摄照片,然后对照片序列进行图像相关分析,即可得出模型试验的变形场分布。利用图像匹配技术追踪模型上点的位移,借用FEM常用的等参单元的概念进行图像校准和应变计算,采用双线性插值技术可以实现微小变形量测,并提出同时用平移和旋转搜索方法,以适应砂土模型的变形特点。精度检验试验结果表明,一个像素以下的平移量测标准方差达到0.19个像素,数值试验表明,15°旋转刚体变形量测,非旋转搜索和旋转搜索的标准方差分别为0.49和0.08个像素。最后给出一个在砂土地基承载力离心机模型试验中的应用实例,分析结果包含砂土模型位移场、最大剪应变场和体积应变场的分布图。结果表明这一方法使得砂土模型局部化变形、剪切带和渐进破坏过程的量化分析成为可能。     

Attractants for Rice Leaf Bug, <Emphasis Type="BoldItalic">Trigonotylus caelestialium</Emphasis> (Kirkaldy), are Emitted from Flowering Rice Panicles

Volatiles were extracted from rice plants of various growth stages with solid-phase microextraction (SPME) and analyzed by gas chromatography-mass spectrometry (GC-MS) to identify attractants that cause invasion of the rice leaf bug Trigonotylus caelestialium (Kirkaldy) into paddy fields. The composition of volatile blends produced by rice plants changed with rice development. In addition, volatile blend compositions differed between the panicles and the stems and leaves. The relative geranyl acetone content was high in all plant structures analyzed. In volatiles from whole plants in the fourth-leaf stage and panicles in the full-ripe stage, the relative content of green leaf volatiles (GLVs) was higher than that found in other rice plant structures. In contrast, relative terpene levels emitted from whole plants in the panicle-formation stage and by panicles and stems and leaves in the flowering stage were higher than those of other rice plant structures. However, the type of terpenes found differed between the panicles and the stems and leaves. Relative levels of β-caryophyllene in whole plants in the panicle-formation stage and panicles in the flowering stage were much higher than that in stems and leaves in the flowering stage. Our previous studies demonstrated that the odor from whole plants in the panicle-formation stage and panicles in the flowering stage is attractive to rice leaf bugs. Here, the attractiveness of β-caryophyllene to adult bugs was investigated in olfactometer assays. Adult females were attracted to β-caryophyllene at a concentration of 0.001%, which is approximately equivalent to the concentration produced by flowering rice panicles. However, β-caryophyllene also was present in the odor of whole plants in the fourth-leaf stage and in stems and leaves in the flowering stage. Furthermore, the amounts of this compound emitted from these structures were similar. Therefore, we suggest that the relative abundance of this compound in a volatile blend is important for attractance of the bugs.     

Frequency stabilization of GaAlAs laser using a Doppler-free spectrum of the Cs-D2line

Experimental results are shown on the frequency stabilization of a GaAlAs laser using a Doppler-free spectrum in the saturated absorption of the Cs-D2line at 852.1 nm. The frequency stability (Allan variance) between3.0 times 10^{-12}and1.0 times 10^{11}was obtained at the averaging time between 0.1 and 1000 s.     

The effectiveness of thermal treatment for development of conductive metalized aramid fiber using supercritical fluid carbon dioxide—Fiber-metal adhesive strength improvement

The effect of thermal treatment to improve the metal adhesion into poly-(p-phenylene terephthalamide) (PPTA), e.g. aramid fiber, has been investigated. After palladium(II)-hexafluoroacetylacetonate metal complex, Pd(hfac)₂, seeding into the fiber using supercritical fluid carbon dioxide, scCO₂, a post-thermal treatment was conducted. As a result, after carrying out electroless copper plating, the adhesive strength between polymer substrate and copper layer greatly increased. Also, in order to have a better comprehension on decomposition reactions of Pd(hfac)₂ under supercritical conditions, remains of metal complex were analyzed using electron ionization mass spectrometry technique (EI-MS). EI-MS mass spectra derived from Pd(hfac)₂ gave us useful information about its dissociation reactions and reaction temperature under supercritical conditions. Additionally, to verify the Pd particles seeding in the fiber surface, X-ray photoelectron spectrometry (XPS) analyses were performed. The results confirmed that post-thermal treatment induced Pd particles diffusion and deeper penetration of Pd complex and its fragments into the fiber.     

Hydrogen production from methane steam reforming: parametric and gradient based optimization of a Pd-based membrane reactor

In this work three mathematical models for methane steam reforming in membrane reactors were developed. The first one is a steady state, non isothermal, non isobaric and one dimensional model derived from material and energy balances and validated using experimental data from the literature. It is referred as full model. The influence of two different intrinsic kinetics available, as well as, the influence of five important parameters on methane conversion (X_CH4_{\mathrm{CH}_{4}}) and hydrogen recovery (Y_H2_{\mathrm{H}_{2}}) were parametrically evaluated through simulations. The second model, referred as meta-model, was obtained though the response surface technique. This meta-model was included into a constrained optimization problem solved using NPSOL. The third model, referred as a simplified model, takes into account only mass balances from the full model. Using this model, a gradient based method (DIRCOL) was used to perform the optimization of the sum of methane conversion and hydrogen recovery. High methane conversions and hydrogen recoveries were reached through these methodologies.