An advanced laser application for controlling of electric resistivity of thick film resistors

When electric resistivity of Thick Film Resistor (TFR) is adjusted to the desired value, laser beam is irradiated onto the resistor material so that a part of the resistor material is instantaneously vaporized and cut away. This conventional laser trimming method to adjust the resistivity of TFRs is an indispensable technique for manufacturing elec-tronic devices such as hybrid ICs. A peculiar phenomena was revealed by us, that is, when specially selected pulse laser beams were irradiated to TFR, the TFR was surface modified without cutting grooves, and then resistivity of the TFR was decreased. We completed the advanced laser process to apply this peculiar phenomena. 8 By comparing with conventional trimming processes, we can show prominent features of the advanced process, for example, resistivity of fine size TFR (300 micrometers-width and under) can be easily controlled. The decrease in resistivity of the TFR is considered to result from the decrease in specific resistivity of glass in the TFR. Because it is considered that the glass in the TFR is heavily doped with ruthenium impurities during the surface modification due to results of morphology observations and x-ray diffraction analysis. We have applied this advanced laser process to fine size TFR (300 micrometers-width), and developed high density hybrid ICs.     

Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Character motion synthesis by principal component analysis and motion control interface by hands

In this paper, we propose an interactive character motion control interface that uses hands. Using their hands and fingers, the user can control a large number of degrees of freedom at the same time. We applied principal component analysis to a set of sample poses and assigned the extracted principal components to each degree of freedom of the hands (such as the hand positions and finger bending/extending angles). The user can control the blending weights of the principal components and deform the character's pose by moving their hands and bending/extending their fingers. We introduced pose and action controls, so that we can alter the standing pose and perform various actions with deformations. So that various types of actions were possible, we constructed a number of action models in advance. We introduced action model selection and action execution mechanisms. We developed methods for computing the feature vector, for applying principal component analysis, and for pose and action synthesis. In addition, we introduced a pose transition method for performing a step motion when necessary to prevent foot sliding. We present our experimental results and demonstrate the effectiveness of our interface. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure and gas permeation properties of asymmetric polyimide membranes made by dry–wet phase inversion: Influence of the polyimide molecular weight

In this article, we report the influence of the polyimide molecular weight (1.2 × 10⁵, 2.6 × 10⁵, and 4.1 × 10⁵) on the structure and the gas permeation properties of asymmetric polyimide membranes made by the dry–wet phase‐inversion process. The apparent skin layer thickness of the asymmetric membrane increased with increasing molecular weight, and the thicknesses of the membranes prepared from the three polyimides with a casting polymer solution containing 8.0 wt % butanol were 132, 350, and 739 nm, respectively. That is, the gas permeance in the asymmetric membranes increased with decreasing molecular weight. In contrast, the gas selectivity of the asymmetric membranes did not depend on the skin layer thickness. The solvent evaporation in the dry phase‐inversion process and the nonsolvent diffusion in the dry process were important factors that determined the formation of the asymmetric membrane. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

A quantum chemical study on the polycondensation reaction of polyesters: The mechanism of catalysis in the polycondensation reaction

We carried out a theoretical study on the mechanism of catalysis in the poly(ethylene terephthalate) (PET) polycondensation reaction. Transesterification reaction of diethylterephthalate with ethanol is investigated as a model system by using the B3LYP level of theory, and Sb(OEt)₃, Ge(OEt)₄ and Ti(OEt)₄ are adopted as model catalysts. We found that the metal center of metal alkoxides coordinates to the carbonyl oxygen atom of the ester, and the alkoxy oxygen atom of alkoxy ligands attacks to the carbonyl carbon atom of the ester to form the four-centered transition state. The activation energy for tetraethoxy titanium catalyzed reaction in vacuo is 15.47 kcal/mol; this is comparable to the experimental result of 11.2 kcal/mol for poly(butylene terephthalate)/Ti(OBu)₄. Because the other mechanisms gave much higher activation energies, this is the most convincing mechanism of PET polycondensation catalysis by antimony, germanium and titanium alkoxides.     

Super environment-friendly electrodeposition paint

Super low VOC due to new composition/reaction mechanism can minimize the environmental risk as it does not contain lead and tin, hazardous air pollutants (HAPs) and endocrine disrupters (EPA/67 items, SPEED’98/JEA/67 items) currently specified as contaminants. New EAD (electrolyzed activate deposition paint) is not the only conventional cure agent or solvent, but also the super low VOC, HAPs materials and endocrine disrupters. The electric energy used by EAD is utilized for the reaction but not for the deposition. EAD consists of two technologies. One is propargyl group change to the allene by using electrodeposition. Propargyl group is stable, but allene group is highly polymerizing. As a result, EAD had high bath stability. The other is sulfonium change to sulfide by using electrodeposition. This sulfonium salt is lost as a result of the electrolytic reduction, and hence can be irreversibly rendered non-conductive. As a result, EAD showed high throwing power.     

Development of a Simplified Calculation Tool for Voltage Drop Caused by Transformer Inrush in Distribution System

It is well known that a voltage drop due to inrush current at an energizing transformer may at times interrupt electrical equipment. Generally, the voltage drop is calculated by using a sophisticated tool such as EMTP, so that the transformer saturation phenomenon has been properly represented. However, it is not practical for distribution system engineers to calculate the voltage drop with transformer inrush by using EMTP, because there are many network access requests needing such calculations with many kinds of transformers. Therefore, in this paper, a simplified and easy‐to‐use calculation tool for voltage drops caused by transformer inrush in a distribution system is developed. In order to understand the voltage drop by inrush current during the planning stage, it is formulated by considering the transformer saturation/unsaturation periods in each winding type. The newly developed tool is based on versatile spreadsheet software such as Microsoft Excel ýO.R. It can be used with accuracy similar to that of EMTP. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 185(1): 36–47, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22394     

Substance P- and calcitonin gene-related peptide-containing nerve fibers in the nasal mucosa of chronically hypoxic rats

Changes made in 1997 and 1998 in the U.S. childhood immunization schedule are discussed, with a focus on the use of poliovirus, pertussis, and combination vaccines. Oral poliovirus vaccine (OPV), the vaccine of choice for all four doses in the polio immunization series since 1962, can cause vaccine-associated paralytic poliomyelitis (VAPP). The inactivated poliovirus vaccine (IPV) has not been associated with VAPP but must be administered by injection and provides inferior intestinal immunity. With the reduced threat of poliovirus importation into the United States, the risk of VAPP, although low, has become less acceptable. The Centers for Disease Control and Prevention accordingly recommended a shift from OPV to IPV in the childhood immunization schedule for the United States, effective January 1997. A sequential OPV and IPV series is recommended, but the schedule includes an OPV-only option, which may be preferred in order to avoid the required injections, and an IPV-only option, which is recommended for immunocompromised persons and their contacts. Concern over local and systemic reactions associated with whole-cell pertussis vaccines, in addition to controversy over a possible relationship between the whole-cell vaccine and neurologic damage, has led to the development of new diphtheria and tetanus toxoids and acellular pertussis vaccine products for use in the diphtheria and tetanus toxoids and pertussis immunization series. Several combination products were licensed in 1997, and more are on the way. This will mean fewer inoculations for children. Increased use of IPV and acellular pertussis products could reduce the frequency of VAPP due to OPV and the local and systemic reactions associated with whole-cell pertussis vaccine.