Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Reaction Pathways in the Synthesis of Photorefractive gamma-Bi12MO20 (M = Si, Ge, or Ti)

Reaction pathways in the synthesis of three photorefractive silicates—γ-Bi₁₂ SiO₂₀ (BSO), γ-Bi₁₂ GeO₂₀ (BGO), and gamma-Bi₁₂ TiO₂₀ (BTO)—were systematically investigated. The main results were as follows: (i) all the reactions of the form 6Bi₂O₃+ MO₂→> γ-Bi₁₂ MO₂₀ (SR1 for M = Si, SR2 for M = Ge, SR3 for M = Ti) in the solid state seemed to be diffusion-controlled processes and were affected by both temperature and time, where the reaction temperature increases in the order SR1 < SR2 < SR3; (ii) the metastable phases Bi₂ SiO₅ (tetragonal) in reaction SR1, Bi₂ GeO₅ (orthorhombic) in reaction SR2, Bi₄ Ti₃ O₁₂ (orthorhombic) in reaction SR3 may be formed and seemed to greatly accelerate the above-mentioned solid-state reaction processes; and (iii) for a continuous heating process, pure γ-Bi₁₂ SiO₂₀ and γ-Bi₁₂ GeO₂₀ could be produced before melting, whereas pure γ-Bi₁₂ TiO₂0 could not be produced, even if all the mixed phases had melted.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Spherical Aluminum Nitride Fillers for Heat-Conducting Plastic Packages

It is necessary for encapsulants to have not only a suitable coefficient of thermal expansion (CTE) compatible to IC devices and a low dielectric constant to reduce the device propagation delay, but also a high thermal conductivity to dissipate large amounts of heat from power-hungry, high-speed IC and high-density packages. Fillers such as silica have been mixed with polymers to improve their properties. Aluminum nitride (AlN) is considered as an alternative one, because it has a higher theoretical thermal conductivity of ∼320 W/mK¹, a compatible CTE with silicon chips and a low dielectric constant. Commercial AlN fillers are angular in shape, because they are prepared via grinding coarse AlN powders synthesized by direct nitridation of aluminum metal and classification. The angular AlN are not expected to have high fluidity when mixed with polymers and hence low packing density. Recently, we successfully obtained single-crystalline spherical AlN fillers. Furthermore, polymer composites filled with the spherical AlN showed excellent thermal conductivity (>8 W/mK) as encapsulants for dissipating the heat generated in electronic devices.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Formation and transformation of cubic 3PbO·2Ta2O5 solid solution

The formation of lead tantalates in the PbO-rich region is studied using the powders prepared by the simultaneous hydrolysis of lead and tantalum alkoxides. Cubic 3PbO · 2Ta₂O₅ solid solutions crystallize at low temperatures from amorphous materials between 60 and 75 mol% PbO. The lattice parameter,a, increases linearly from 1.0545 to 1.0705 nm with increasing PbO. At higher temperatures the solid solutions above 66.67 mol% PbO are transformed into those of rhombohedral 2PbO · Ta₂O₅. Rhombohedral 5PbO · 2Ta₂O₅ is formed at 850 to 900 °C by transformation of 2PbO·Ta₂O₅ solid solution corresponding to 71.43 mol% PbO. The existence of previously reported 3PbO·Ta₂O₅ is not confirmed.     

Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models

The variation of surface residual stress within a machined surface layer caused by face turning was studied. The size of the tool’s corner radius and the feed rate affect residual stress. A process model using the finite element method is proposed and the mechanical effects of the corner radius and feed rate on a machined surface were discussed. When a tool with a small corner radius is used, surface residual stress perpendicular to the cutting direction becomes compression stress. As well, surface residual stress changes from tension to compression as the feed rate decreases. The process model consists of an orthogonal cutting simulation and an indentation-like simulation of a corner radius into a work piece surface. The simulated results show quantitative agreement with the residual stress measured experimentally. The integrity of the machined surface will be controlled more efficiently if the cutting conditions during finishing are determined with the proper consideration of the surface generating process.