Synthesis,properties, and biodegradability of three-branched copolyamide (4/6)

Previous studies on polyamide 4, excellent properties, functionalities, and biodegradation in natural condition have been shown. In this study, three-branched (star-shaped) copolyamides constituted of polyamide 4 and polyamide 6 constitutional unit were synthesized by anionic ring-opening copolymerization of 2-pyrrolidone with ε-caprolactam. The thermal and mechanical properties and the biodegradability of the obtained copolyamides have been systematically investigated. The weight-average molecular weight of the copolyamides was as high as tens of thousands (M_w 10–80 × 10³ g/mol). The composition of the copolyamides was approximately in accord with the monomer feed ratio, thereby being controllable. The thermal and mechanical properties changed readily as the composition was varied (T_m 146–266°C, ΔH_m 10–70 J/g, T_d 278–369°C, tensile strength 28–64 MPa, elongation at break 80–750%). The copolyamide having 2-pyrrolidone unit of 96–51 mol% exhibited biodegradability by an activated sludge. The biodegradation of the copolyamide proceeded uniformly without disproportion in constitutional unit.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Intermittent administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and prevents pancreatic exhaustion in diabetic mice

We previously demonstrated that repetitive administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and energy expenditure in obese diabetic db/db mice. However, we have not evaluated in detail the effect of single or intermittent BDNF administration on glucose metabolism in a diabetic animal model. The objectives of this study were to examine the dose-response effect and dosing interval of BDNF administration in db/db mice and to evaluate the effect of intermittent BDNF administration on pancreatic function in db/db mice. We evaluated the dose-response effect of BDNF by single administration in db/db mice. First, single administration of BDNF greater than 70 mg/kg significantly reduced blood glucose concentration one day after administered, and the BDNF effect was maintained for 6 d. Next, the effects of BDNF administered twice a week at 4, 10, 25, and 62.5 mg/kg on blood glucose concentration, and the effects of BDNF administered once a week at 10, 20, 30, 50, and 70 mg/kg on blood glucose concentration were examined in db/db mice. In the intermittent treatment studies, BDNF dose-dependently ameliorated glucose metabolism by not only the twice-a-week administration but also the once-a-week administration. Lastly, because BDNF reduces the food intake of obese hyperphagic diabetic mice, the effects of BDNF administered once or twice a week on the blood glucose concentration and plasma and pancreatic insulin concentrations in db/db mice were compared with those of the vehicle under pair-fed conditions. Under pair-fed conditions, the intermittent administration of BDNF (25 mg/kg, twice a week, or 50 mg/kg, once a week) significantly reduced the blood glucose concentration and increased the plasma and pancreatic insulin concentrations compared with those in the pair-fed vehicle-treated db/db mice. This indicates that the prolonged hypoglycemic effect of BDNF is not simply due to the reduction of food intake. In conclusion, we demonstrated that the intermittent administration of BDNF ameliorates glucose metabolism and prevents pancreatic exhaustion in obese diabetic mice. These findings indicate that BDNF may have potential as a unique hypoglycemic agent for the treatment of diabetes at a fundamental level with good patient compliance.     

A multi-port D-R mutator using CCIIs with current followers

A multi-port D-R mutator with new current conveyors (CFCCIIs) as the four-port active element is proposed. Each CFCCII consists of a current follower added to a second-generation current conveyor (CCII). This proposed circuit is a simple configuration using CCIIs, CFCCIIs and grounded capacitances and is applied to higher order high-pass filters. This configuration can realize a superior transmission characteristic, inheriting the characteristic of the conventional LC filter. Since all the passive elements are grounded, the influence of parasitic elements of current conveyors can be reduced with this circuit configuration. As a result, this circuit is considered a suitable configuration for monolithic integration. Results obtained from the SPICE simulations show the realized filters have excellent performance and the circuit is effective.     

Preparation of Fe-based monodisperse spherical particles with fully glassy phase

In this study, we prepared monodisperse spherical particles of a desired diameter using [(Fe_0.5Co_0.5)_0.75B_0.2Si_0.05]₉₆Nb₄ alloy; the particles were prepared by using an atomization process developed by us. The particles have perfect sphericity and narrow size distribution along with a homogeneous composition. The phase transitions of particles from the fully glassy phase to the crystalline phase via mixed phase structures occurred as the particle diameter was increased; the particles produced in the fully glassy phase in an argon atmosphere had a diameter of less than 300 μm. This allowed the estimation of the intrinsic critical cooling rate for the particles with a fully glassy phase, R_c:R_c varied in the range of 700-900 K/s and depended only on the initial temperature of the alloy melt.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Functional binders for reversible lithium intercalation into graphite in propylene carbonate and ionic liquid media

Poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), and poly(vinyl alcohol) (PVA), which have oxygen species as functional groups, were utilized as a binder for graphite electrodes, and the electrochemical reversibility of lithium intercalation was examined in PC medium and ionic liquid electrolyte, lithium bis(trifluoromethanesulfonyl)amide dissolved in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide (BMP-TFSA). Columbic efficiency of 75–80% with more than 300 mAh g^?1 was achieved upon first reduction/oxidation cycle in both electrolytes using these binding polymers, which were significantly improved in comparison to a conventional PVdF binder (less than 45% of columbic efficiency for the first cycle). For the graphite-PVdF electrode, co-intercalation and/or decomposition of PC molecules solvating to Li ions were observed by the electrochemical reduction, resulting in the cracking of graphite particles. In contrast, the co-intercalation and decomposition of PC molecules and BMP cations for the first reduction process were completely suppressed for the graphite electrodes prepared with the polymers containing oxygen atoms. It was proposed that the selective permeability of lithium ions was attained by the uniform coating of the graphite particles with PAA, PMA, and PVA polymers, because the electrostatic interaction between the positively charged lithium ions and negatively charged oxygen atom in the polymer should modulate the desolvation process of lithium ions during the lithium intercalation into graphite, showing the similar functions like artificial solid-electrolyte interphase.     

Decay of material properties of degraded MEA caused by repeated cold starts under subzero conditions in polymer electrolyte fuel cells

This study investigated the characteristics of cell performance degradation, decline of component performance, and changes in the properties of membrane electrode assembly materials caused by repeated cold starts under a subzero condition of ?30 °C. It was made clear that functional decay appeared mainly at the cathode due to increased proton conductive impedance and reduction of reactivity of the electrode catalyst. Among the cathode components, an increase in proton conductive impedance in the cathode electrolyte was dominant. Furthermore, the application of ion chromatography and a newly developed proton‐induced gamma‐ray emission method to measure fluorine in the off‐gas drain revealed that decomposition of the electrolyte was dominant in the cathode catalyst layer. A decrease in fluorine in the cathode electrolyte measured by fluorine‐19 nuclear magnetic resonance confirmed this decomposition. A hypothesis is also presented concerning the cause of the performance degradation. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20394