Spray-Coating of Superhydrophobic Coatings for Advanced Applications

Superhydrophobic coatings are widely applicable, e.g., as self-cleaning surfaces or water–oil separation membranes, yet their wider usage is impeded due to costs of fabrication, size, or substrate limitation. Spray-coating is a versatile coating procedures and might offer a good solution for the fabrication of these superhydrophobic coatings, due to the fact that coatings can be fabricated on various materials in a simple, fast, and inexpensive manner. Most procedures rely on hybrid coatings of hydrophobized nanoparticles and a polymeric matrix, which have several drawbacks including the easy loss of nanoparticles and difficult waste handling. Here, the fabrication of the superhydrophobic material, called Fluoropor, for the first time, by spray-coating on various substrates including metals, tissues, concrete, and glass is presented. It is fabricated by spray-coating a mixture of a highly fluorinated monomer blended with porogens followed by photopolymerization. The superhydrophobicity of the material relies on the porous structure on the micro-/nanoscale across the bulk material and does not require any nanoparticles. Excellent self-cleaning ability of these coatings, resistance against thermal and abrasive impact, and their application as oil–water separation membranes are shown. This versatile applicability is highly promising for real-world application as self-cleaning coatings or oil–water separating membranes.     

Measures for investigating the contextual modulation of information transmission

The aim of this paper is to show how information theoretic measures can be used to analyse and interpret the results of psychophysical experiments designed to search for conditions under which information from one source modulates the transmission of information from another source. We therefore use measures of mutual and conditional information to analyse systems with two inputs. The information transmitted by such a system can be split into three components depending on whether it is shared between the two inputs or is specific to each. We are concerned here with distinguishing systems that use one input to modulate transmission of information about the other from systems that simply add both inputs, and show how the three components provide evidence for distinguishing between additive and modulatory effects. We also report numerical simulations of the sampling biasses and variances of these measures as a function of the sample size and propose minimum sample sizes that should be used to overcome the bias.     

How the Kano model contributes to Kansei engineering in services

Recent studies show that products and services hold great appeal if they are attractively designed to elicit emotional feelings from customers. Kansei engineering (KE) has good potential to provide a competitive advantage to those able to read and translate customer affect and emotion in actual product and services. This study introduces an integrative framework of the Kano model and KE, applied to services. The Kano model was used and inserted into KE to exhibit the relationship between service attribute performance and customer emotional response. Essentially, the Kano model categorises service attribute quality into three major groups (must-be [M], one-dimensional [O] and attractive [A]). The findings of a case study that involved 100 tourists who stayed in luxury 4- and 5-star hotels are presented. As a practical matter, this research provides insight on which service attributes deserve more attention with regard to their significant impact on customer emotional needs. STATEMENT OF RELEVANCE: Apart from cognitive evaluation, emotions and hedonism play a big role in service encounters. Through a focus on delighting qualities of service attributes, this research enables service providers and managers to establish the extent to which they prioritise their improvement efforts and to always satisfy their customer emotions beyond expectation.     

Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation

This paper presents the use of micro-particle imaging velocimetry (micro-PIV) to analyse fluid flow and hence ion replenishment in PCB micro-via during the electroplating process. The cross section of a PCB via is fabricated in PMMA to allow optical access to the sample. Fluid flow within two 1:1 aspect ratio blind micro-vias, one with straight side walls and the other with tapered side walls were compared. Flow is also analysed in a 1:1 aspect ratio through via. Flow rates measured using micro-PIV are used to validate simulated flow models. The results show that there are increased flow rates within the blind via with tapered side walls. This goes some way to explaining the improved electroplating results obtained in industry when tapered vias are used. Initial experimental results using megasonic streaming to remove bubbles from blind micro-via and promote ion transportation within high aspect ratio PCB micro-via to enhance electrodeposition are also reported.     

Treatment with a nonsteroidal antiinflammatory drug after calving did not improve milk production,health, or reproduction parameters in pasture-grazed dairy cows

Previous research results have indicated an increase in pregnancy rate in pasture-grazed cows treated with a nonsteroidal antiinflammatory drug (NSAID) 3 to 4 wk postcalving, when a high proportion of nucleated cells from within the uterus were polymorphonucleated; however, no effect on milk production was detected. It was hypothesized that this lack of effect on milk production was because the administration of the NSAID was too late after calving. The aims of the current study were to evaluate the timing of administering a propionic acid-derived NSAID (i.e., carprofen) on milk production, metabolic status, uterine health, and reproductive performance. Six-hundred and thirty-nine cows (134 primiparous and 505 multiparous) calving between July 4 and September 5, 2012, in 2 herds (herd 1: n = 228; herd 2: n = 411) were enrolled. Using a randomized block design, cows were allocated to 1 of 3 treatment groups as they calved: (1) no treatment (control; n = 221), (2) NSAID administered on d 1, 3, and 5 postcalving (early; n = 214), and (3) NSAID administered on d 19, 21, and 23 postcalving (late; n = 204). Milk production and composition, and body condition were determined weekly. Blood was sampled at 4 time points (1 precalving and 3 postcalving) to determine the effects of treatment on indicators of metabolic health and energy status. Uterine health was determined by measuring the proportion of nucleated cells that were polymorphonucleated following cytobrush sampling of the uterus between d 13 to 24 and d 30 to 49 postcalving. Irrespective of timing of application, NSAID did not affect milk production, body weight, or body condition during early lactation. Treatment with an NSAID 19 to 23 d postcalving increased the proportion of cows submitted for breeding during the first 3 wk of the seasonal breeding program (control: 85%, early: 83%, and late: 92%), but did not affect conception or pregnancy rates. No detectable effect of treatment on uterine health or circulating metabolites and minerals existed, although cows in the early NSAID treatment group had marginally lower serum β-hydroxybutyrate concentrations (0.1 mmol/L) than the other groups between 2 and 26 d in milk. In conclusion, administration of this particular NSAID at either 1 or 3 wk after calving did not improve milk production, indicators of health, or reproductive performance.     

Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing

Ultra-high performance concrete (UHPC) and ultra-high performance fiber reinforced concrete (UHP-FRC) were introduced in the mid 1990s. Special treatment, such as heat curing, pressure and/or extensive vibration, is often required in order to achieve compressive strengths in excess of 150 MPa (22 ksi). This study focuses on the development of UHP-FRCs without any special treatment and utilizing materials that are commercially available on the US market. Enhanced performance was accomplished by optimizing the packing density of the cementitious matrix, using very high strength steel fibers, tailoring the geometry of the fibers and optimizing the matrix-fiber interface properties. It is shown that addition of 1.5% deformed fibers by volume results in a direct tensile strength of 13 MPa, which is 60% higher than comparable UHP-FRC with smooth steel fibers, and a tensile strain at peak stress of 0.6%, which is about three times that for UHP-FRC with smooth fibers. Compressive strength up to 292 MPa (42 ksi), tensile strength up to 37 MPa (5.4 ksi) and strain at peak stress up to 1.1% were also attained 28 days after casting by using up to 8% volume fraction of high strength steel fibers and infiltrating them with the UHPC matrix.     

Lattice damage and secondary phase formation in Yttria stabilised zirconia implanted with Fe at different temperatures

In this paper we report on the lattice damage and nanocrystalline secondary phase formation in Fe implanted Yttria stabilised zirconia (YSZ) up to a peak concentration of 10%. The implantation temperature has been varied between room temperature and 1000 °C. Samples were characterized using Rutherford backscattering/channeling and X-ray diffraction. We observed that (1) YSZ remains partially crystalline even after Fe implantation at room temperature and the lattice damage can be partially recovered if implantation is performed at elevated temperatures; (2) crystalline bcc-Fe nanoparticles have formed and grown with increasing implantation temperature. The nanoscale Fe precipitates and the YSZ matrix have a crystallographic orientation relationship.