Effects of some technological processes on glucosinolate contents in cruciferous vegetables

Effects of blanching, boiling and freezing of selected cruciferous vegetables (Brussels sprouts, white and green cauliflower, broccoli, and curly cale) on their glucosinolate (GLS) contents were determined. It was found that blanching and cooking of the vegetables led to considerable (P < 0.05) losses of total GLS, from 2.7 to 30.0% and from 35.3 to 72.4%, respectively. No systematic changes in total GLS were found in the vegetables that were blanched and frozen for 48 h. In addition, the highest concentration of cancer-protective compounds, such as aliphatic and indole GLS, were found in Brussels sprouts (sinigrin and glucobrassicin) and in broccoli (glucoraphanin).     

Adsorption,Electrokinetic and Stabilizing Properties of the Guar Gum/Surfactant/Alumina System

The adsorption of non‐ionic polysaccharide guar gum (GG) in the presence of surfactants (anionic SDS, non‐ionic TX‐100, cationic CTAB and their equimolar mixtures) from their NaCl solutions onto an alumina surface (Al₂O₃) was studied spectrophotometrically. This study is important in light of the many disagreements concerning the structure and behaviour of mixtures containing polymers and surfactants at the surface of an adsorbent. The presence of surfactant caused an increase in the GG adsorption in all studied systems as a consequence of the formation of complexes. Among the single surfactants the highest increase in the GG adsorption was observed in the presence of CTAB. However, the usage of mixtures of the surfactants caused a much more effective increase in the GG adsorption on the alumina surface because of the synergistic effect of the surfactants. In order to get some information on the structure of the electrical double layer (edl), the surface charge density of alumina was determined and zeta potential measurements were conducted. The obtained data showed that the adsorption of GG or GG/surfactant complexes on the metal oxide surface strongly influences a diffused part of the edl, whereas a compact part of the edl is not affected. The colloidal stability of the alumina suspensions was measured in the presence and absence of GG and surfactants. It was found that GG and the mixtures of GG and surfactants can improve the stability of the suspensions.     

Synthesis and Interfacial Activity of Novel Heterogemini Sulfobetaines in Aqueous Solution

Three new heterogemini sulfobetaines and their chloride salts were synthesised. The interfacial activities of the obtained chlorides in aqueous solution were studied by equilibrium and dynamic surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule and standard Gibbs energy of adsorption as well as micelle lifetime and diffusion coefficient were determined. The adsorption properties and micelle lifetime of these compounds significantly depend on the length of alkyl chain. The critical micelle concentration decreases with increasing chain length of the compounds considered. The values of the diffusion coefficient of N‐alkyl‐N‐methyl‐N‐(3‐sulfopropyl)‐6‐(N‐alkyl‐N‐methylamino)hexylammonium chloride tend to decrease as the concentration is increased.     

The Impact of Zeta Potential and Physicochemical Properties of TiO2‐Based Nanocomposites on Their Biological Activity

The aim of this research was to observe the relationship between zeta potential, morphology, surface area, porosity, chemical composition, and ecotoxicity of nanocomposite powders such as Au/TiO₂, Ag₂O/TiO₂, PdO/TiO₂, Ag/TiO₂/SiO₂, Ag/N(C)TiO₂, and SiO₂/TiO₂ from which Ag₂O/TiO₂, Ag/N(C)/TiO_2, and Ag/TiO₂/SiO₂ were exhibiting good antimicrobial properties. It was observed, that nanomaterials characterized by similar morphology and zeta potential revealed the similar toxic behavior. The samples of higher agglomeration and higher zeta potential, especially Ag/TiO₂/SiO₂ xerogel and TiO₂/SiO₂ aerogel were generally less ecotoxic to water organisms and plants. They were also not genotoxic in concentrations up to 500 and 250 mg/L, respectively.     

Causes and Effects of Uncontrolled Water Inrush into a Decommissioned Mine Shaft

Central Europe experienced catastrophic rainfalls and flooding in 2010. This paper discusses a decommissioned shaft that was flooded by surface water, which led to displacement of shaft backfill and an inrush of large amounts of water into an underground pumping station. The weather conditions for the period preceding the inrush, the hydrogeological conditions, the quantity of water that entered the mine dewatering systems, and the underground hydraulic connections are all described. Uncontrolled inflow of water as a cause of backfill saturation and the hazard for active underground infrastructure were analysed. A need to rebuild damaged infrastructure was identified. The case study highlights the need to improve underground mine closure requirements to ensure safe conditions above ground, particularly in densely populated areas.     

Suspension flow in crystallizers with and without hydraulic classification

The main goal of this paper is to model a multiphase flow of a monodispersed suspensions in various types of crystallizers: Draft Tube Magma (DTM), Double Draft Tube (DDT) and Fluidized bed (FL). To do this, the CFD (Computational Fluid Dynamics) methods were used. The geometry of model apparatus was similar to those applied in industry. The composition of suspensions and their physical properties were the same as in practical cases.     

Isoprostanes-biomarkers of lipid peroxidation: their utility in evaluating oxidative stress and analysis

Isoprostanes (IsoPs) are key biomarkers for investigating the role of free radical generation in the pathogenesis of human disorders. To solve IsoPs-related problems with regard to isoprostanes, analytical tools are required. This paper reviews the problems and trends in this field focusing on the methodology for assaying biomarkers in exhaled breath condensate (EBC) samples. A large amount of work has been done in the qualitative and quantitative analysis of IsoPs, but a standardized method has yet to emerge. The methodologies described differ, either in the sample preparation steps or in the detection techniques, or both. Requiring a number of chromatographic steps, the relevant extraction and purification procedures are often critical and time-consuming, and they lead to a substantial loss of target compounds. Recent data show that EBC is a promising non-invasive tool for the evaluation of different diseases. Two main analytical approaches have been adopted for IsoPs measurement: immunological methods and mass spectrometry. The methodologies for the extraction, purification and analysis of IsoPs in EBC samples are presented.     

Lithography using nano-lens arrays made of light

Abstract

We present a detailed analysis of the appearance intensities for various ion species in strong field multiple ionization based on the Thomas-Fermi model of the atom electronic cloud. Our results differ significantly from the results of a simpler model presented recently. A new range of validity for the adiabatic approximation has been found.     

Two-phase cooling characteristics of a saturated free falling circular jet of HFE7100 on a heated disk: Effect of jet length

Direct jet impingement boiling heat transfer operating at low flow rates is of great interest for the localized moderate heat fluxes from the targets with delicate mechanical structure, where the aggressive techniques such as high-speed jets are not suitable. Boiling heat transfer from an upward facing disk targeted by a falling jet was studied experimentally at different volumetric flow rates and various jet lengths. The working fluid was chosen to be the dielectric liquid HFE7100 and the heated spot was an 8-mm diameter disk. Using previous CHF correlations in their original form, valid at very low volumetric flow rates, results in large disagreements since it was found that variation in the jet length changes the boiling characteristics. It is demonstrated that although the circular hydraulic jump formation within the heater diameter may suppress the heat transfer under certain conditions, moving the jet closer to the target may significantly improve the boiling curves at the critical heat flux (CHF) regime. At low flow rates, the CHF increases as the jet length decreases while for moderate and high flow rates the boiling curves show approximately a universal behavior for different jet lengths. For such low flow rates, the effect of jet length on boiling curves was shown to be related to the variation of the cross section of the falling jet and the formation of hydraulic jump at radial distances smaller than the heater diameter. The current CHF results for different jet lengths are correlated by including the effect of jet length in the previous correlation proposed by Sharan and Lienhard.