Electrophoretic deposition of conjugated polymer: Deposition from dilute solution and PEDOT coating effect

It has been shown that the films of a soluble conjugated polymer poly[(9,9-dioctyl-2,7-divinylene fluorenylene)-alt-{2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene}] for electronic devices can be prepared by the electrophoretic deposition with polymer suspensions derived from dilute polymer solutions which are so dilute that the conventional spin-coating technique is not applicable. For example, a 100 nm-thick film can be prepared on an indium-tin-oxide (ITO) electrode from a suspension from solution containing 0.1 g/l of the polymer. The thickness of the polymer film deposited is found to be almost proportional to the concentration of the polymer, and the linearity down to 5.0 × 10^?3 g/l is confirmed. On the other hand, it has been found that coating the ITO electrode with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) salt results in low and nonlinear deposition rate.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Thermal-Oxidative Pretreatment and Evaluation of Poly(hexafluoropropene Oxide) Fluids

Two commercial poly(hexafluoropropene oxide) fluids were thermally pretreated at 343°C in pure oxygen. IR and NMR spectra indicate that this pretreatment was effective in removing hydrogen end-capped impurities. A decrease in the quantity of volatile material produced during thermal oxidative decomposition and increase in the thermal decomposition temperature indicated improvement in the stability of the fluids. However, this pretreatment failed to render the fluids completely stable in oxidizing atmospheres at 316°C in the presence of metal alloys.     

Electrical and non-linear optical properties of Ba2NaNb5O15 thin films

Abstract

Tungsten Bronze-type Ba₂NaNb₅O₁₅ (BNN) films were deposited on the fused quartz, Si and substrates using a RF magnetron sputtering method. The sputtering conditions, such as a deposition ratio and rate of the BNN film, were optimized.     

Kinetics of Enthalpy Relaxation at the Glass Transition in Ternary Tellurite Glasses

The kinetics of enthalpy relaxation (recovery) at the glass transition in x K₂O·(20− x )MgO·80TeO₂ glasses has been examined from heat capacity measurements using differential scanning calorimetry to clarify the features of the structural relaxation in ternary TeO₂-based glasses. Ternary glasses such as 10K₂O·10MgO·80TeO₂ show high thermal resistance against crystallization compared with binary glasses. The degree of fragility m estimated from the activation energy for viscous flow E _η and the glass transition temperature T _g is m = 55–62, indicating a fragile character in TeO₂-based glasses. Large heat capacity changes of 43.1–48.2 J·mol⁻¹·K⁻¹ are also observed at the glass transition. The activation energy for enthalpy relaxation Δ H is evaluated from the cooling rate dependence of the limiting fictive temperature, and values of Δ H = 897–1268 kJ·mol⁻¹ are obtained. Negative deviation from additivity in Δ H is also observed. Values of the Kovacs–Aklonis–Huchinson–Ramos (KAHR) parameter θ estimated from Δ H and T _g are 0.33–0.42 K⁻¹. It has been proposed that ternary glasses have more homogeneous and constrained glass structure compared with binary glasses.     

Anionic alternating copolymerization of epoxide and 3,4‐dihydrocoumarin and its application to networked polymers

3,4‐Dihydrocoumarin (DHCM) is an aromatic six‐membered lactone, which does not undergo anionic homopolymerization. However, it does undergo copolymerization with an epoxide. The striking feature of this copolymerization is its 1:1 alternating nature, which allows for the formation of polyesters. In this mini‐review, we describe the copolymerization behavior, the polymer structure and the advantages that can be achieved by addition of DHCM to the epoxy‐imidazole curing system. Another focus is our development of DHCM analogues, which bring the advantages of DHCM to their applications as comonomers for the curing system. Copyright © 2009 Society of Chemical Industry     

Development of a high‐definition 32‐in. PDP

We developed the world's smallest‐profile 32‐in. HDTV PDP. By improving the luminous efficiency, a luminance of 650 cd/m² and power consumption (discharge and driving circuit) of 200 W or less was achieved. Moreover, incorporating an advanced color compensating (ACC) filter improved the PDP's color‐reproduction capability, better than that of CRTs.     

Analysis of the fiber-matrix cylindrical model with a circumferential crack

An axisymmetrical fiber-matrix cylindrical model with a circumferential crack in the matrix of finite diameter is formulated within elastostatic scope. The problem is considered by means of integral transforms and a singular integral equation with a dominant generalized Cauchy kernel is obtained. Following the numerical solution technique developed by Erdogan, Gupta and Cook, the singular integral equation is reduced to a system of linear equations. By solving the linear equations, stress intensity factors associated with the crack length and the material properties are calculated and discussed. The solutions presented in this study are found to be general, including the solutions as special cases of the present formulation for a homogeneous solid cylindrical bar and a thick-walled shell with an outer circumferential crack. This revised version was published online in August 2006 with corrections to the Cover Date.     

Interactions of nonsteroidal anti-inflammatory drugs with rat renal organic anion transporter, OAT-K1

We recently cloned and characterized the rat kidney-specific organic anion transporter, OAT-K1, which was suggested to mediate renal tubular transport of methotrexate. In this study, we investigated the interactions of nonsteroidal anti-inflammatory drugs (NSAIDs) with OAT-K1 by evaluating the effects of these drugs on renal distribution of methotrexate in vivo, and on methotrexate accumulation in the stably transfected LLC-PK1 cells expressing OAT-K1 (LLC-OAT-K1). NSAIDs such as indomethacin and ketoprofen had significant inhibitory effects on renal accumulation of methotrexate in rats after coadministration. Indomethacin and ketoprofen inhibited methotrexate accumulation by LLC-OAT-K1 cells in a competitive manner with the apparent inhibition constant values of 1. 0 mM and 1.9 mM, respectively. Other NSAIDs including ibuprofen, flufenamate and phenylbutazone also showed potent inhibitory effects on methotrexate accumulation. However, indomethacin was not transported via OAT-K1. These results indicate that NSAIDs have potent inhibitory effects against the OAT-K1-mediated methotrexate transport, which suggests that the OAT-K1 may be one of interaction sites for methotrexate and NSAIDs in the kidney.