粉末冶金结构零件材料的泊松比

研究了粉末冶金机械零件使用的烧结材料的杨氏模量、切变模量及泊松比与孔隙度的关系.制备了三种钢粉,在不同条件下进行了压制、烧结与热处理.孔隙度对杨氏模量、切变模量及泊松比的影响最大.特别是泊松比还受孔隙形状的影响,而孔隙形状随粉末类型、烧结温度与烧结气氛及热处理条件而变化.对于大部分实际应用的粉末组成来说,烧结气氛对经烧结和热处理后材料的泊松比影响不大.对于部分预合金化粉末(Fe4%Ni1.5%Cu0.5%Mo)+0.8%石墨,只有在孔隙度低于20%时,烧结温度对泊松比与孔隙度的关系才有影响.在这种情况下.提出了烧结与热处理试样泊松比与孔隙度关系的较简单近似方程:在烧结温度1 423K下,v=0.300-0.266P+0.579P2;在烧结温度1 523K下,v=0.304-0.264P+0.548P2.     

Clinically applicable bulk isolation of blood CD34+ cells for autografting in children

The quality of population-based cancer registries has been measured by the indices of the proportion of total incident cases (DCO%) registered by death certificate only (DCO), and the ratio of incidence to mortality (I/D ratio). Recently it has been recommended that DCO% should be used as an index for the reliability of diagnosing cancers and that the proportion of cases first notified via death certificate (DCN, DCN%) be used as an index for the completeness of registration. Parkin introduced a method to estimate the registration rate, the estimated proportion of the "true incidence" that are registered in population-based registries. We recommend a modified method for estimating the registration rate for cancer registries where DCN% is relatively high, as it is in Japan, as Parkin's method may overestimate the registration rate. The method is as follows: the registration rate = (1-DCN% x 1/D ratio)/(1-DCN%). The registration rates at the Osaka Cancer Registry between 1966 and 1992 were estimated using our method. During this period, the yearly registration rate was 74.6-78.4% for males and 69.1-73.3% for females. When the cancer cases were looked at according to site, the yearly registration rate was 74.2-81.6% for stomach cancer, 81.2-89.3% for lung cancer, and 71.3-76.9% for uterine cancer. These results show that the registration rate is high for cancers that have an unfavorable prognosis and low for cancers that have a favorable prognosis. We recommend that all cancer registries in Japan calculate the completeness of registration by utilizing DCN defined as the sum of DCO plus cases not reported as cancer but with supportive clinical information of such obtained through survey of the registry for DCN.     

Uniform temperature cooling power of the superfluid Stirling refrigerator

Uniform temperature cooling power measurements of a superfluid Stirling refrigerator are presented for³He-⁴He molar concentrations of 5.9%, 17% and 36% and for temperatures between 0.37 K and 1.4 K. The results are compared to an ideal Fermi gas model and to a more general thermodynamic model. The Fermi model agrees well with the 5.9% concentration data; however, the more elaborate model is needed for higher concentration mixtures.     

Experimental and numerical investigation of effects of particle shape and size distribution on particles’ dispersion in a coaxial jet flow

In this study, an experimental and a numerical investigations are performed to investigate the effect of particle’s shape and size distribution on its dispersion behavior. Firstly, particle dispersion of pulverized coal and spherical polymer particles is observed by Particle Image Velocimetry (PIV) technique in the experiment. Secondly, a simulation is performed to analyze the particle dispersion in detail. Spherical and spheroidal motion models are applied to particle’s movement to investigate the shape effect. Furthermore, monodisperse and polydisperse for particles are applied to investigate the size distribution effect on the dispersion. Experimental results show that in the jet turbulence flow, pulverized coal particles, which have complex shapes and various sizes, have quite different dispersion behavior compared to spherical particles. In terms of the results of the simulation, this difference is mainly caused by the size distribution effect. Although particle’s shape affects the dispersity, it is weakened by the size distribution effect.     

Plant zero structure and further order reduction of a singular H∞ controller

A new class of reduced‐order controllers is obtained for the H_∞ problem. The reduced‐order controller does not compromise the performance attained by the full‐order controller. Algorithms for deriving reduced‐order H_∞ controllers are presented in both continuous and discrete time. The reduction in order is related to unstable transmission zeros of the subsystem from disturbance inputs to measurement outputs. In the case where the subsystem has no infinite zeros, the resulting order of the H_∞ controller is lower than that of the existing reduced‐order H_∞ controller designs which are based on reduced‐order observer design. Furthermore, the mechanism of the controller order reduction is analysed on the basis of the two‐Riccati equation approach. The structure of the reduced‐order H_∞ controller is investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Extremely narrow spectral linewidth and low chirping of theMQW-DFB-PPIBH laser diode

The low threshold current of 9 mA, the high side-mode suppression ratio of more than 45 dB, the extremely narrow spectral linewidth of 1.1 MHz, and the low chirping of 2.8 Å at -20 dB at 2 Gb/s nonreturn to zero (NRZ) modulation have been achieved in the multiple quantum well (MQW) distributed feedback (DFB) p-substrate partially inverted buried heterostructure (PPIBH) laser diode. The spectral linewidth of 1.1 MHz is the narrowest value among 300-μm-length solitary laser diodes. These results suggest that the MQW-DFB laser diodes are a promising light source for longer distance and higher bit-rate optical communication systems and coherent optical communication systems     

Sar1 Affects the Localization of Perilipin 2 to Lipid Droplets

Lipid droplets (LDs) are intracellular organelles that are ubiquitous in many types of cells. The LD core consists of triacylglycerols (TGs) surrounded by a phospholipid monolayer and surface proteins such as perilipin 2 (PLIN2). Although TGs accumulate in the phospholipid bilayer of the endoplasmic reticulum (ER) and subsequently nascent LDs buds from ER, the mechanism by which LD proteins are transported to LD particles is not fully understood. Sar1 is a GTPase known as a regulator of coat protein complex Ⅱ (COPⅡ) vesicle budding, and its role in LD formation was investigated in this study. HuH7 human hepatoma cells were infected with adenoviral particles containing genes coding GFP fused with wild-type Sar1 (Sar1 WT) or a GTPase mutant form (Sar1 H79G). When HuH7 cells were treated with oleic acid, Sar1 WT formed a ring-like structure around the LDs. The transient expression of Sar1 did not significantly alter the levels of TG and PLIN2 in the cells. However, the localization of PLIN2 to the LDs decreased in the cells expressing Sar1 H79G. Furthermore, the effects of Sar1 on PLIN2 localization to the LDs were verified by the suppression of endogenous Sar1 using the short hairpin RNA technique. In conclusion, it was found that Sar1 has some roles in the intracellular distribution of PLIN2 to LDs in liver cells.     

Association of Ligamentum Flavum Hypertrophy with Adolescent Idiopathic Scoliosis Progression—Comparative Microarray Gene Expression Analysis

The role of the ligamentum flavum (LF) in the pathogenesis of adolescent idiopathic scoliosis (AIS) is not well understood. Using magnetic resonance imaging (MRI), we investigated the degrees of LF hypertrophy in 18 patients without scoliosis and on the convex and concave sides of the apex of the curvature in 22 patients with AIS. Next, gene expression was compared among neutral vertebral LF and LF on the convex and concave sides of the apex of the curvature in patients with AIS. Histological and microarray analyses of the LF were compared among neutral vertebrae (control) and the LF on the apex of the curvatures. The mean area of LF in the without scoliosis, apical concave, and convex with scoliosis groups was 10.5, 13.5, and 20.3 mm², respectively. There were significant differences among the three groups (p < 0.05). Histological analysis showed that the ratio of fibers (Collagen/Elastic) was significantly increased on the convex side compared to the concave side (p < 0.05). Microarray analysis showed that ERC2 and MAFB showed significantly increased gene expression on the convex side compared with those of the concave side and the neutral vertebral LF cells. These genes were significantly associated with increased expression of collagen by LF cells (p < 0.05). LF hypertrophy was identified in scoliosis patients, and the convex side was significantly more hypertrophic than that of the concave side. ERC2 and MAFB genes were associated with LF hypertrophy in patients with AIS. These phenomena are likely to be associated with the progression of scoliosis.     

The quantum relative entropy as a rate function and information criteria

We prove that the quantum relative entropy is a rate function in large deviation principle. Next, we define information criteria for quantum states and estimate the accuracy of the use of them. Most of the results in this paper are essentially based on Hiai-Ohya-Tsukada theorem.

     

Vacuum seal for a rectangular flange

A new vacuum seal for a rectangular flange used in r.f. equipments, was developed. The vacuum seal consists of a recess with a flat surface, machined into a rectangular flange, a rectangular metal gasket with a raised projection on one face, and a mating flange with a recess and raised projection. No leak greater than 1 × 10⁻¹⁰ Pa m³/s was found in leak tests, before and after baking cycles (100 °C, 12 h).