Characteristics of sol-gel derived PZT thin films with lead oxide cover layers and lead titanate interlayers

The sol-gel derived PbZr_0.53Ti_0.47O₃ (PZT) films were fabricated on the bare Pt/Ti/SiO₂/Si substrates or the same substrates coated by the PbTiO₃ (PT) interlayers. The post-deposition annealing temperature and time were optimized when the PbO cover layers and PbO vapour-containing atmosphere were compared with each other and adopted as the method to diminish the lead-loss problem during the high-temperature post-deposition annealing. The X-ray diffraction patterns, microstructures, and electrical properties such as relative permittivity, _r, remanent polarization, P _r, and coercive electrical field, E _c, were investigated in relation to the annealing conditions. The PZT films deposited on the bare Pt/Ti/SiO₂/Si substrates under the PbO vapour-containing atmosphere showed better electrical properties. This indicates that the PbO vapour-containing atmosphere may be the better method of lead-loss-prevention to process the lead-containing films rather than the PbO cover layer method. The electrical characteristics of the PZT films, _r=1150, a dissipation factor of 0.039, P _r=26 C cm^–2, and E _c=40.5 kV cm^–1 were measured at 1 kHz. When PZT films were deposited on substrates coated by the PT layers, PZT-PT films with single perovskite phase were derived by post-deposition annealing at 500 °C for 1 h. However, the relative electrical properties are very poor, i.e. E _r=160, P _r=2.0 C cm^–2 and E _c=75 kVcm^–1. The optimum combination for preparing PZT-PT films is a 40 nm PbTiO₃ interlayer and annealing conditions of 6 h at 550 °C in a PbO vapour-containing atmosphere; the derived films exhibit electrical properties of E _r=885, P _r=21.5 C cm^–2 and E _c=64 kV cm^–1. The combination of inserting a PT interlayer and annealing in a PbO vapour-containing atmosphere can prevent the formation of electrical short paths. In this case, nearly pin-hole-free PZT films can be grown on the PT (interlayer) /Pt/Ti/SiO₂/Si substrates. It is believed that it is possible to prepare the PZT films with nano-scale uniformity, reproducible quality, which may be worth considering for commercial applications.     

Production of IL-6 by T cells from the femoral head of patients with rapidly destructive coxopathy (RDC)

We developed a method to improve the quantitative precision of FDG-PET scans in cancer patients. The total-lesion evaluation method generates a correlation coefficient (r) constrained Patlak parametric image of the lesion together with three calculated glucose metabolic indices: (a) the total-lesion metabolic index ("KT-tle", ml/min/lesion); (b) the total-lesion voxel index ("VT-tle", voxels/lesion); and (c) the global average metabolic index ("KV-tle", ml/min/voxel). METHODS: The glucose metabolic indices obtained from conventional region of interest (ROI) and multiplane evaluation were used as standards to evaluate the accuracy of the total-lesion evaluation method. Computer simulations and four patients with metastatic melanoma before and after chemotherapy were studied. RESULTS: Computer simulations showed that the total-lesion evaluation method has improved precision (% s.d. < 0.6%) and accuracy (approximately 10% error) compared with the conventional ROI method (% s.d. approximately 5%; approximately 25% error). The KT-tle and VT-tle indices from human FDG-PET studies using the total-lesion evaluation method showed excellent correlations with the corresponding values obtained from the conventional ROI methods and multiplane evaluation (r approximately 1.0) and CT lesion volume measurements. CONCLUSION: This method is a simple but reliable way to quantitatively monitor tumor FDG uptake. The method has several advantages over the conventional ROI method: (a) less sensitive to the ROI definition, (b) no need for image registration of serial scan data and (c) includes tumor volume changes in the global tumor metabolism.     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.     

Thermodynamic evaluation of Cu– system based on newly determined Gibbs energy of formation of

Thermodynamic evaluation of Cu–Cu₃P system has been conducted by applying subregular solution model with Gibbs energy of Cu₃P formation that was newly determined by means of triple Knudsen cell mass spectrometry. Both the calculated vapor pressure of phosphorus and phase diagram of Cu–P system are excellently consistent with the literature data in the composition range of Cu–Cu₃P, indicating that there is no significant thermodynamic inconsistency between the present work based on the Gibbs energy of Cu₃P formation determined and the literature data.     

Molecular dynamics simulations of diffusion of submonolayer polar liquid lubricant films on solid surfaces

A fundamental understanding of the diffusion phenomena of submonolayer polar liquid films is important for achieving reliable lubrication between moving mechanical parts separated by a nanometer-sized gap. To acquire this understanding, we conducted molecular dynamics (MD) simulations of diffusion phenomena of submonolayer polar perfluoropolyether (PFPE) Zdol films on solid surfaces. To improve the accuracy of these simulations, we developed an all-atom model that includes hydrogen-bond potential and refined atomic charges for Zdol molecules and tested it through MD simulations of spreading of step-shaped submonolayer PFPE films. Our MD simulations reproduced the experimentally observed effects of polar end groups on the diffusion speed and molecular conformation of Zdol. We then conducted MD simulations of self-diffusion of submonolayer Zdol films; these simulations demonstrated that as the thickness of the submonolayer Zdol films decreases, molecular conformation becomes flatter and the self-diffusion coefficient decreases. These changes in molecular conformation partially explain our experimental finding that the spreading of step-shaped submonolayer polar PFPE films slows down with decreasing initial thickness.     

New pixel driving circuit using self‐discharging compensation method for high‐resolution OLED micro displays on a silicon backplane

A new 4T2C pixel circuit formed on a silicon substrate is proposed to realize a high‐resolution 7.8‐μm pixel pitch AMOLED microdisplay. In order to achieve high luminance uniformity, the pixel circuit compensates its Vth variation of the MOSFET for the driving transistor internally by using self‐discharging method. Also presented are 0.5‐in Quad‐VGA and 1.25‐in wide Quad‐XGA microdisplays with the proposed pixel circuit.     

Toward Optimal Space Partitioning for Unbiased,Adaptive Free Path Sampling of Inhomogeneous Participating Media

Photo‐realistic rendering of inhomogeneous participating media with light scattering in consideration is important in computer graphics, and is typically computed using Monte Carlo based methods. The key technique in such methods is the free path sampling, which is used for determining the distance (free path) between successive scattering events. Recently, it has been shown that efficient and unbiased free path sampling methods can be constructed based on Woodcock tracking. The key concept for improving the efficiency is to utilize space partitioning (e.g., kd‐tree or uniform grid), and a better space partitioning scheme is important for better sampling efficiency. Thus, an estimation framework for investigating the gain in sampling efficiency is important for determining how to partition the space. However, currently, there is no estimation framework that works in 3D space. In this paper, we propose a new estimation framework to overcome this problem. Using our framework, we can analytically estimate the sampling efficiency for any typical partitioned space. Conversely, we can also use this estimation framework for determining the optimal space partitioning. As an application, we show that new space partitioning schemes can be constructed using our estimation framework. Moreover, we show that the differences in the performances using different schemes can be predicted fairly well using our estimation framework.     

Accumulation of triosephosphate isomerase, with sequence homology to Beta amyloid peptides, in vessel walls of the newborn piglet hippocampus

We investigated whether beta-amyloid (Abeta)-like immunoreactivity was seen in the brains of newborn piglets. The immunoreactivity for Abeta(1-42) and Abeta(1-40) proteins, but not Abeta precursor protein, was present in CD68-positive perivascular cells of the hippocampus and in parts of the meninges. It was colocalized with immunoreactivity for receptor for advanced glycation end product and tumor necrosis factor-alpha. The protein with a molecular mass of 27 kDa, which was recognized by the Abeta antibodies, was identified as triosephosphate isomerase (TPI) with sequence homology to Abeta peptides by N-terminal amino acid sequencing, mass fingerprint analysis using matrix-associated laser desorption/ionization mass spectrometry, and Western blotting. Western blotting assay also revealed that detectable expression of Abeta proteins were not seen in the piglet brains. These findings indicate that TPI with sequence homology to Abeta peptides accumulates in perivascular cells of the microglia/macrophage lineage located around arterial vessels of the newborn piglet hippocampus.     

Patient views of adverse events: comparisons of self-reported healthcare staff attitudes with disclosure of accident information

In the present paper, we report results of surveys in 2003 in Japan and Denmark about patients' views about adverse events, focusing on the actions of healthcare staff involved in a medical accident. Results show that patients were more likely to indicate negative expectations to a doctor's reactions after a medical accident when asked in general terms than when asked in relation to concrete case stories. When asked in general terms, 66% (47%) of Japanese (Danish) respondents expected that doctors sometimes hold back on providing information to patients about a medical accident, while 37% (7%) did so when asked about a concrete, mild-outcome case. We examine some possible reasons for the relatively high level of distrust of Japanese patients, and we discuss whether the seemingly lower level of disclosure in Japan than in Denmark and the negative stories in the Japanese press may have an impact. We also suggest some implications for introducing a patient-centred or customer-centred approach to risk management in healthcare and other domains.