Pressure-drop reduction and heat-transfer deterioration of slush nitrogen in horizontal pipe flow

Cryogenic slush fluids such as slush hydrogen and slush nitrogen are two-phase, single-component fluids containing solid particles in a liquid. Since their density and refrigerant capacity are greater than those of liquid-state fluid alone, there are high expectations for the use of slush fluids in various applications such as clean-energy fuels, spacecraft fuels for improved efficiency in transportation and storage, and as refrigerants for high-temperature superconducting equipment. Experimental tests were performed using slush nitrogen to obtain the flow and heat-transfer characteristics in two different types of horizontal circular pipes with inner diameters of 10 and 15 mm. One of the primary objectives for the study was to investigate the effect of pipe diameter on the pressure-drop reduction and heat-transfer deterioration of slush nitrogen according to changes in the pipe flow velocity, solid fraction and heat flux. In the case of an inner diameter of 15 mm, pressure drop was reduced and heat-transfer characteristics deteriorated when the pipe flow velocity was higher than 3.6 m/s. On the other hand, in the case of an inner diameter of 10 mm, pressure drop was reduced and heat-transfer characteristics deteriorated when the pipe flow velocity was higher than 2.0 m/s. From these results, it can be seen that a larger pipe diameter produces a higher onset velocity for reducing pressure drop and deteriorating heat-transfer characteristics. Furthermore, based on observations using a high-speed video camera, it was confirmed that pressure drop was reduced and heat-transfer characteristics deteriorated when the solid particles migrated to the center of the pipe and the flow pattern of the solid particles inside the pipe was pseudo-homogeneous.     

Thermodynamics of antimony,arsenic, and tin in CaO—CaF2 melts

In view of the importance of tramp element contamination of steel products through a large volume of scrap consumption in the near future, the thermodynamic behaviour of Sb, As, Sn and Cu in CaO—CaF₂ melts under reducing conditions was studied by examining the dependences of distribution of each element between Cu, Ag or Sn alloys and CaO—CaF₂ melts on the CaO activity, oxygen partial pressure and temperature around 1 500°C. As a result, the reaction products on treatment by Ca compounds were demonstrated to be Ca₃Sb₂, Ca₃As₂, Ca₂Sn and CaCu. Experimentally obtained distributions were extrapolated to lower oxygen partial pressures less than 10^?18 atm to estimate the feasibility of removing those tramp elements from molten iron. It is thermodynamically indicated that if the prevailing oxygen partial pressure of the environment is below 10^?23 atm, these impurities, except Cu, would be substantially removed from molten steel.     

Aseismic evaluation for aging degradation of nuclear power plant components

The commercial operation of light water reactor plants in Japan already has a history of nearly 30 years. Since the beginning of the 1990s, studies have been conducted on aging degradation of nuclear power plants in Japan and abroad and, earlier in 1999, the domestic program of plant life management (PLM) was settled on. The program is based on the results of the PLM Study, which started in 1997. The purpose of the study was to develop the preventive maintenance program with an evaluation of aging degradation for maintaining the functions of plant component equipment. Taking account of the need for proper management of aging degradation, meanwhile, the technical evaluation of aseismic capability of aged plants is also considered to be important. Based on this concept, we evaluated the impact of assumed aging degradation on the aseismic capability of the plant facilities and structures covered by the PLM Study. In the aseismic evaluation, aging degradation modes selected in the PLM Study were divided into two categories—the one is including some degradation modes which impact on the aseismic capability of the facilities and structures should be taken into account, the other is including those whose impact might be ignored. Then the aging degradation modes composing the former one were quantitatively evaluated primarily based on the Technical Guidelines for Aseismic Design of Nuclear Power Plants (JEAG-4601) (NUREG/CR-6241, 1987). The result of the evaluation indicated that no aging degradation mode to be reflected in the maintenance program was extracted from the viewpoint of securing the aseismic capability of the plant components. However, establishment of rational evaluation methods for aging degradation, e.g. aseismic capability evaluation of thinned piping systems, was made a future technical subject.     

A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.     

Immunohistochemical detection of estrogen and progesterone receptors in spermatozoa of infertile men

OBJECTIVE: To evaluate the clinical implication of sex steroidal actions on human spermatozoa. PATIENTS AND METHODS: Human spermatozoa were obtained from 20 males. Immunohistochemical staining for estrogen receptors (ER) and progesterone receptors (PR) was conducted by the avidin-biotin-peroxidase complex method. RESULTS: Positive immunohistochemical staining of ER and PR was observed in all 8 cases of fertile couples. From infertile couples, ER were detected in 8/12 cases, including 3 with normozoospermia, 2 with oligozoospermia, 1 with asthenozoospermia, and 2 with teratozoospermia, but not in 4/12 cases, 1 with normozoospermia, 1 with asthenozoospermia, and 2 with oligoasthenozoospermia. PR were undetectable in all cases of negative ER and in 1 case (normozoospermial) of positive ER. CONCLUSION: Negative ER and/or PR in spermatozoa from infertile couples might be involved in cases of male infertility.     

In vitro and in vivo antibacterial activities of AM-1155 in the fields of obstetrics and gynecology

OBJECTIVES: Until relatively recently southern Europe was regarded as having a medium to low multiple sclerosis prevalence, of about 20 or less per 100,000. However, recent studies in Sardinia, Sicily, continental Italy, Cyprus and Spain have yielded higher MS prevalence rates, between 32 and 102.6 per 100,000. We present the results of a prevalence study of MS in the municipality of M6stoles, central Spain. MATERIAL AND METHODS: To ascertain the prevalence of multiple sclerosis in M6stoles (195,979 inhabitants), an intensive study was undertaken using several sources of information. We used the Poser criteria in diagnosis. RESULTS: There were 85 patients (53 women and 32 men) classified as definite or probable, prevalence 43.4/100,000 (95% CI, 34.7 to 53.7). The incidence rate was 3.8/100,000/year (95% CI, 2.7 to 5.3) in the last 5 years. Mean age on prevalence day was 38.8+/-10.9 years. Mean age at onset was 31.7+/-9.3 years. Mean interval between initial symptoms and diagnosis was 1.7 years. Mean duration of disease was 7.6+/-6.1 years. Overall, 70.6% had a relapsing-remitting course, 18.8% had a primary progressive and 10.5% had a secondary progressive. Mean EDSS score was 2.7+/-1.9. CONCLUSION: The M6stoles study confirms the conclusions of previous smaller population studies that Spain is a moderately high or medium MS risk zone.     

Successful pregnancy in a patient with heart failure secondary to aortic and mitral regurgitation

The transmembrane nature of the receptor-like protein tyrosine phosphatases (PTPases) suggests that they transduce as yet unidentified extracellular signals to intracellular events via a phosphotyrosyl-protein dephosphorylation step, although little is known of their regulation and cellular activities. Structure/function studies of PTP alpha demonstrate that both catalytic domains are required for full enzymatic efficiency and that interdomain interactions may modulate PTP alpha activity and specificity. Overexpression of PTP alpha results in cell transformation and tumorigenesis, likely as a consequence of the ability of PTP alpha to dephosphorylate and activate the c-src tyrosine kinase. This suggests a role for PTP alpha in normal cell proliferation. PTP alpha is so far unique among the PTPases in terms of its oncogenic potential, and overexpression or deregulation of PTP alpha may be involved in the genesis, progression or maintenance of certain tumor states.     

Photo-induced radicals in glucose and cellobiose

Photo-induced radicals in glucose and cellobiose, the model compounds of cellulose molecule, were studied by ESR spectrometry. Very poor formation of radicals in glucose as compared to those in cellobiose was observed. However, a spectrum showing a singlet line was easily produced by the use of light involving shorter wavelengths. It was estimated to be due to the radical formed at the reducing C₁ position of glucose molecule. By paper chromatography, the photo-irradiated cellobiose was confirmed to split into glucose through scission of glucosidic bonds in the molecule. The ESR spectrum of the acid-hydrolyzed cellulose similar to that of the unhydrolyzed sample was a seven-line spectrum, but the relative signal intensity was here markedly low. This phenomenon seems to be caused by the reduction of amorphous portion in the samples due to acid hydrolysis. It was concluded that the glucosidic bonds in cellobiose and cellulose molecules are very active toward light and play an important role in the radical formation in photo-irradiated samples.     

In-line type micropulse lidar with an annular beam: experiment

An in-line type compact micropulse lidar (MPL) with an annular beam was developed for low-altitude cloud measurement. An optical circulator and a couple of axicon prisms for an annular beam were installed on the lidar optics. The advantage of using the in-line MPL is its ability to obtain a near-range measurement with a narrow field of view of 0.1 mrad and to obtain a depolarization measurement of the orthogonally polarized echoes caused by ice crystals of a low-altitude cloud. The total insertion loss of the lidar optics was 3 dB. Detectors such as avalance photodiode detectors can be operated in an analog mode near the breakdown voltage because of the high isolation of the optical circulator. The ideal lidar echo variation from the nearest distance was verified by measuring the mountain echoes at various distances. The depolarization measurement of a low-altitude ice cloud was also demonstrated.     

Photocatalytic decomposition of 2-propanol in air by mechanical mixtures of TiO2 crystalline particles and silicalite adsorbent: The complete conversion of organic molecules strongly adsorbed within zeolitic channels

Fundamental photocatalytic behaviors were investigated for mechanical mixtures of TiO₂ crystalline particles (P25) and MFI type zeolite (silicalite) in the decomposition reaction of 2-propanol vapor in air for the first time. Mechanical mixing enables reliable comparisons to be made between photocatalysts because the contents of TiO₂ and the adsorbent can be widely varied (51 times in this study) while keeping the particle size and crystallinity of TiO₂ unchanged. That is, the use of mechanical mixture highlights the behavior of molecules adsorbed in the microporous crystals, keeping the TiO₂ unchanged. In the case of the mixed photocatalysts, the initial 2-propanol concentration in the gas phase was significantly reduced because of adsorption into the zeolite. After photo-irradiation started, 2-propanol was decomposed to CO₂ with no (or trace amount of) acetone detected in the gas phase. The analysis of final amount of CO₂ formed by the decomposition demonstrated that just by the mechanical mixing of TiO₂ and zeolite, the TiO₂ photocatalyst decomposed completely the reactant and intermediate molecules strongly adsorbed into the zeolite. On the other hand, in reference experiments in which TiO₂ and zeolite were not mixed and were separately placed in a photoreactor, the organic compounds strongly adsorbed in the zeolite could not be decomposed to CO₂ by the photocatalyst. It is notable that the CO₂ formation rates for the mixed photocatalysts were mostly constant for those comprising 40 wt% or larger amounts of zeolite, while being slower than for pure TiO₂. The rate-determining step was discussed based on these data. The present study showed that the mixed photocatalyst could remove organic vapors by adsorption in the dark and decompose completely to CO₂ at moderate reaction rates under photo-irradiation with minimized evolution of intermediate molecules into the gas phase.