Dimethylamine-modified waste paper for the recovery of precious metals

Waste newsprint paper was modified with dimethylamine (DMA) to obtain a tertiary amine type adsorption gel called DMA-paper gel. This new derivative was investigated for adsorption, from hydrochloric acid medium, of gold, palladium, and platinum as well as some base metals. The gel exhibited selectivity only for precious metals with a remarkably high capacity for Au(III), i.e., 4.6 mol/kg dry gel and comparable capacities, i.e., 2.1 and 0.9 mol/kg for Pd(II) and Pt(IV), respectively. Also, Au(III) was reduced to the elemental form during adsorption. Furthermore, column adsorption and subsequent elution of the adsorbed metal ions by acidic thiourea revealed encouraging recoveries (approximately 90%), thus enhancing the scope of the gel for effective preconcentration, separation, and recovery of precious metals. The effectiveness of recovery of precious metals from real industrial liquor was also tested, and it showed highly encouraging results with respect to the stability of the gel in the harsh medium, and selectivity for the targeted metal ions in the presence of excess of other metal ions.     

Investigation of ochratoxin a, B and citrinin contamination in various commercial foods

Ochratoxin A (OTA), ochratoxin B (OTB) and citrinin (CIT) in commercial foods were simultaneously determined and confirmed with high-performance liquid chromatography (HPLC) and liquid chromatography coupled with tandem mass spectrometry (LC/MS/MS). The samples examined were made up of cereal, fruit, coffee, and cacao products. The limits of quantification (S/N> or =10) of OTA, OTB and CIT were 0.1 microg/kg or less. Aflatoxins (AF), deoxynivalenol (DON) and fumonisins were also surveyed. Of 157 samples examined, 44 were contaminated with OTA at levels of 0.11 to 4.0 microg/kg. At least 2 positive samples were labeled as domestics. In most positive samples, the OTA level was low, less than 1 microg/kg. The highest incidence of OTA was observed in cacao powder (10/12), followed by instant coffee (5/7), cocoa (5/8) and raisin (6/13). OTB was found in fruit and cacao products containing relatively high levels of OTA. Co-occurrence of OTA, CIT and DON was found in cereal products, and co-occurrence of OTA and AF was found in cacao products. Approximately 30% of naturally contaminated OTA in roasted coffee bean moved into the extract solution when brewed with paper filter.     

Simultaneous determination of ochratoxin A, B and citrinin in foods by HPLC-FL and LC/MS/MS

Methods using high-performance liquid chromatography with fluorescence detection (HPLC-FL) and using liquid chromatography with tandem mass spectrometry (LC/MS/MS) were developed for simultaneous determination of ochratoxin A (OTA), ochratoxin B (OTB) and citrinin (CIT) in cereal, fruit, and coffee products. The samples were extracted with ethyl acetate under an acidic condition, and then cleaned up with liquid-liquid separation. The test solutions were analyzed by reverse-phase HPLC-FL and LC/MS/MS. Mass spectral acquisition was performed in positive ion mode by applying multiple reaction monitoring. The performances of both detectors were almost equivalent. The recoveries of OTA and OTB were 87-111%, and that of CIT were 70-88%. The limits of quantification (S/N> or =10) of OTA, OTB and CIT was 0.1 mug/kg or less. These methods were considered to be useful for the determination of the three mycotoxins at low levels (0.1 microg/kg).     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Developing a system to cover OTHER via rudimentary objective–subjective distinction

In this paper, we propose that the human brain develops a system to cover OTHER. This capital “OTHER” represents the transcendental other in infancy and the latent other later in life. The system grows to cover the transcendental other through the developmental process of objective–subjective distinction, and thereafter the latent other is found as a duality of the system later in life. To argue the emergence of such system regarding social conceptualization, we introduce experiments in which we verify that preschoolers abstract, categorize, and evaluate social relationships. The results show that children around 6 years old exhibit early social conceptualization and rudimentary objective–subjective distinction. Moreover, we claim that early social conceptualization is acquired through developing the heterarchical system when the experiments are regarded as communication between the participant and experimenter. Human beings may regard this heterarchical system as the self.     

An International Research Comparative Study of the Degree of Cooperation between disciplines within mathematics and mathematical sciences: proposal and application of new indices for identifying the specialized field of researchers

Behaviormetrika - Based on 10 years of data on academic papers from 2005 to 2014 available on the “Web of Science”, we conducted an in-depth review and analysis of...     

Liquid Quinones for Solvent‐Free Redox Flow Batteries

Liquid benzoquinone and naphthoquinone having diethylene glycol monomethyl ether groups are designed and synthesized as redox active materials that dissolve supporting electrolytes. The Li‐ion batteries based on the liquid quinones using LiBF₄/PC show good performance in terms of voltage, capacity, energy efficiency, and cyclability in both static and flow modes. A battery is constructed without using intentionally added organic solvent, and its high energy density (264 W h L^?1) demonstrates the potential of solvent‐free organic redox flow batteries using liquid active materials.     

Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression

A unidirectional carbon fiber reinforced plastic (CFRP) was scanned by an X-ray computed tomography (CT) system. Based on the X-ray CT images, a three-dimensional model with random fiber waviness was developed. Each fiber location was identified in a sectional CT image. Subsequently, the relative displacement of fibers between adjacent sectional CT images was obtained with a digital image correlation method. This procedure was repeated to obtain fiber waviness along the axial direction. The constructed three-dimensional fiber model showed random waviness of each fiber in the unidirectional CFRP. Finite element analysis was performed using the three-dimensional model. Simulation results showed bending and twisting deformations coupled with axial contractions during axial compression, which developed due to fiber waviness. A reduction of the fiber directional Young’s modulus due to fiber random waviness was quantitatively evaluated.     

Photoluminescence and scintillation properties of Al(PO3)3–CsPO3–CsBr–CeBr3 glass scintillators

Scintillators, which are widely used as radiation detectors, are phosphors that release absorbed ionizing radiation energy as ultraviolet or visible light. Inorganic glass scintillators have several advantages over inorganic crystal scintillators, such as ease of fabrication and low costs. However, unlike inorganic crystals, which can emit up to tens of thousands of photons/MeV, inorganic glasses exhibit less than several hundred photons/MeV in most cases. Here, we studied an inorganic glass scintillator that exhibits a light yield of 2700 photons/MeV, which exceeds those of previous inorganic glass scintillators with high light yields of approximately 2000 photons/MeV. The density of this material is 3.28 g/cm³, which is relatively high among glass scintillators. Moreover, a fast scintillation decay with a decay time constant of 30.0 ns was obtained and is attributed to the 5d–4f transition of Ce³⁺. Thus, this glass is suitable for gamma- and X-ray detection, thereby expanding the practical applicability of inorganic glass scintillators.