Practical Continuous‐Flow Controlled/Living Anionic Polymerization

A continuous‐flow reaction system was developed, allowing flow conditions of the entire system to be maintained at a predetermined constant level, which is one of the most significant factors for successful industrial application. Controlled/living anionic polymerization was selected as a model reaction since the characteristics of its polymer products, molecular weights, and molecular weight distributions are highly susceptible to changes in the relative flow rates of a monomer and initiator solutions. In flow microreactors, controlled/living anionic polymerization of styrene in tetrahydrofuran (THF)/hexane initiated by THF‐diluted n‐butyllithium (n‐BuLi) was examined. Poly(styrenes) of larger molecule sizes such as Mn > 15 000 were successfully synthesized. After continuous operation for four hours, ca. 0.5 kg of the polymer was readily produced with narrow molecular weight distribution, demonstrating the applicability of this continuous‐flow system for controlled/living anionic polymerization on considerably large scale with a view to its industrial usage in the future.     

A PSS‐Free PEDOT Conductive Film Supported by a Hierarchical Nanoporous Layer Glass

The importance of transparent conductive film is increasing due to its use in applications such as touch‐panel devices. Although indium tin oxide is widely used because of its high conductivity and transparency, conductive polymers are being studied as alternative materials that avoid the use of rare metals and the brittleness associated with existing systems. Polyethylene dioxythiophene (PEDOT)/polyethylene sulfonic acid (PSS) is drawing a lot of attention due to its well‐balanced conductivity, transparency, film formability, and chemical stability. The nonconductive PSS reportedly covers the conductive PEDOT. The PSS shell provides carrier and film‐formability to PEDOT but is also a barrier that hinders electrical conductivity. Therefore, the PEDOT film formability is explored supported by a substrate without the addition of PSS. The “hierarchical nanoporous layer glass” holds the PSS‐free PEDOT with its nanopores to form a homogeneous, transparent film. The PSS‐free PEDOT film thus achieves transparency of over 85% and resistivity of below 500 Ω sq^?1.     

Cooking up an interactive olfactory game display.

It's long been possible to give users outside an actual environment that environment's visual and auditory information and thus contribute to establishing presence. However, we've yet to establish much presence when users require olfactory information - such as in environments focused on foods, flowers, perfumes, or, in some cases, more offensive smells. Recently, several VR researchers have become interested in olfaction and olfactory displays that present smells in virtual environments (VEs). In this article, we describe our interactive olfactory display. One of our development goals is to confirm the assumption that users' interactions with the system increases presence. Thus, we used our interactive olfactory display to develop a cooking game in collaboration with electronic engineers and artists.     

Effect of meso Positioned Substituents on the Stability and Photodynamic Activity of Lipid-Membrane-Incorporated Porphyrin Derivatives

In this study we prepared aqueous solutions of lipid-membrane incorporated tetraarylporphyrins and tetrapyridylporphyrin (LMIPors) by the injection method using dimethyl sulfoxide. The porphyrins with proton-donor groups at the meso position afforded stable aqueous solutions of LMIPors. However, although tetrakis(carboxyphenyl)porphyrin was scarcely incorporated in lipid membranes, it was soluble in water. Among these LMIPors, the photodynamic activity of tetrakis(hydroxyphenyl)porphyrin was higher than that of tetrakis(aminophenyl)porphyrin. This was attributed to the self-aggregation of a part of tetrakis(aminophenyl)porphyrin in the liposomes, which induced self-quenching and the consequent decrease of its photodynamic activity.     

An Organoid for Woven Bone

Bone formation (osteogenesis) is a complex process in which cellular differentiation and the generation of a mineralized organic matrix are synchronized to produce a hybrid hierarchical architecture. To study the mechanisms of osteogenesis in health and disease, there is a great need for functional model systems that capture in parallel, both cellular and matrix formation processes. Stem cell-based organoids are promising as functional, self-organizing 3D in vitro models for studying the physiology and pathology of various tissues. However, for human bone, no such functional model system is yet available. This study reports the in vitro differentiation of human bone marrow stromal cells into a functional 3D self-organizing co-culture of osteoblasts and osteocytes, creating an organoid for early stage bone (woven bone) formation. It demonstrates the formation of an organoid where osteocytes are embedded within the collagen matrix that is produced by the osteoblasts and mineralized under biological control. Alike in in vivo osteocytes, the embedded osteocytes show network formation and communication via expression of sclerostin. The current system forms the most complete 3D living in vitro model system to investigate osteogenesis, both in physiological and pathological situations, as well as under the influence of external triggers (mechanical stimulation, drug administration).     

3D reconstruction considering calculation time reduction for linear trajectory shooting and accuracy verification with simulator

Artificial Life and Robotics - Photogrammetry is a three-dimensional (3D) reconstruction from images. In photogrammetry, when each image captures the features of the target object for 3D...     

The Mucus Binding Factor Is Not Necessary for Lacticaseibacillus rhamnosus CRL1505 to Exert Its Immunomodulatory Activities in Local and Distal Mucosal Sites

Both viable and non-viable orally administered Lacticaseibacillus rhamnosus CRL1505 modulate immunity in local (intestine) and distal (respiratory) mucosal sites. So, intestinal adhesion and colonization are not necessary for this probiotic strain to exert its immunomodulatory effects. In this work, a mucus-binding factor knockout CRL1505 strain (ΔmbfCRL1505) was obtained and the lack of binding ability to both intestinal epithelial cells and mucin was demonstrated in vitro. In addition, two sets of in vivo experiments in 6-week-old Balb/c mice were performed to evaluate ΔmbfCRL1505 immunomodulatory activities. (A) Orally administered ΔmbfCRL1505 prior to intraperitoneal injection of the Toll-like receptor 3 (TLR3) agonist poly(I:C) significantly reduced intraepithelial lymphocytes (CD3⁺NK1.1⁺CD8αα⁺) and pro-inflammatory mediators (TNF-α, IL-6 and IL-15) in the intestinal mucosa. (B) Orally administered ΔmbfCRL1505 prior to nasal stimulation with poly(I:C) significantly decreased the levels of the biochemical markers of lung tissue damage. In addition, reduced recruitment of neutrophils and levels of pro-inflammatory mediators (TNF-α, IL-6 and IL-8) as well as increased IFN-β and IFN-γ in the respiratory mucosa were observed in ΔmbfCRL1505-treated mice when compared to untreated control mice. The immunological changes induced by the ΔmbfCRL1505 strain were not different from those observed for the wild-type CRL1505 strain. Although it is generally accepted that the expression of adhesion factors is necessary for immunobiotics to induce their beneficial effects, it was demonstrated here that the mbf protein is not required for L. rhamnosus CRL1505 to exert its immunomodulatory activities in local and distal mucosal sites. These results are a step forward towards understanding the mechanisms involved in the immunomodulatory capabilities of L. rhamnosus CRL1505.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.     

Superconductivities of Quasi-One-Dimensional and Quasi-Two-Dimensional Tight-Binding Electrons in Magnetic Field

The superconductivity of the tight binding electrons in a magnetic field is studied. We can treat both cases of quasi-one-dimension and quasi-two-dimension in the same manner. We study a various kind of anisotropic superconductivity with line nodes of the energy gap by taking attractive interaction between electrons in nearest sites along each axis. The magnetic field dependence of the transition temperature is calculated for a various pairing symmetry of superconductivity. When a magnetic field is applied in the conducting plane, the transition temperature is shown to increase as the magnetic field increases. In the strong magnetic field the eigenstates approach to those in the absence of hopping between planes, resulting in no orbital frustration.     

Theoretical studies on the charge trap mechanism of MONOS type memories – Relationship between atomistic information and program/erase actions

We have investigated atomistic structural changes of two types of defects (N vacancies and O substitutional defects) in a SiN layer in MONOS type memories during program/erase actions. N vacancy type defects reveal reversible structural change, whereas O substitutional defects are expected to reveal irreversible structural changes, indicating that detailed atomistic structure is crucial for clarifying the characteristics of MONOS type memory operation.