In vivo electrochemical studies of dopamine clearance in subregions of rat nucleus accumbens: differential properties of the core and shell

The effects of the rodent hepatocarcinogens clofibric acid and diprofibrate on the activity of the peroxisomal fatty acyl-CoA oxidase, DNA synthesis, and apoptosis were compared in cultured rat and human hepatocytes. Rat hepatocytes expressed a 10-fold greater level of the peroxisomal fatty acyl-CoA oxidase compared to human hepatocytes. At the highest concentration (1.0 mM), both drugs induced a two- to threefold increase in this enzyme activity in both rat and human hepatocytes. Ciprofibrate (0.1 and 0.2 mM) caused a twofold increase in DNA synthesis in rat hepatocytes, whereas clofibric acid had no effect on DNA synthesis in these cells. In contrast, increasing concentrations of both clofibric acid and ciprofibrate produced inhibition of DNA synthesis in human hepatocytes. By using the terminal transferase dUTP-biotin nick end labeling technique, it was observed that 0.1 and 0.2 mM clofibric acid and ciprofibrate suppressed transforming growth factor-beta (TGF beta)-induced apoptosis by 50% in rat hepatocytes, but they had no effect on TGF beta-induced apoptosis in human hepatocytes. Although clofibric acid and ciprofibrate diminished TGF beta-induced apoptosis, they had no effect on the basal apoptotic levels in the rat hepatocyte cultures. However, both drugs significantly increased the percent of apoptotic cells in the human hepatocyte cultures. It is concluded that primary rat and human hepatocyte cultures respond differently to peroxisome proliferators. The differences in effects on DNA synthesis and apoptosis support the hypothesis that human liver cells are refractory to peroxisome proliferator-induced hepatocarcinogenesis.     

Influenza virus hemagglutinin stimulates the protein kinase C activity of human polymorphonuclear leucocytes

Human polymorphonuclear leukocytes (PMNL) incubated with influenza virus, A/USSR/90/77 (H1N1) or its hemagglutinin produced a significant increase in their PKC activity when compared with untreated PMNL. The activated kinase translocated from cytosol to cellular membrane. The calcium-dependent enzyme activity was inhibited by a specific inhibitor suggesting that alpha and/or beta isoforms of PKC were involved.     

Mash1 and neurogenin1 expression patterns define complementary domains of neuroepithelium in the developing CNS and are correlated with regions expressing notch ligands

Genetic studies in Drosophila and in vertebrates have implicated basic helix-loop-helix (bHLH) genes in neuronal fate determination and cell type specification. We have compared directly the expression of Mash1 and neurogenin1 (ngn1), two bHLH genes that are expressed specifically at early stages of neurogenesis. In the PNS these genes are expressed in complementary autonomic and sensory lineages. In the CNS in situ hybridization to serial sections and double-labeling experiments indicate that Mash1 and ngn1 are expressed in adjacent and nonoverlapping regions of the neuroepithelium that correspond to future functionally distinct areas of the brain. We also showed that in the PNS several other bHLH genes exhibit similar lineal restriction, as do ngn1 and Mash1, suggesting that complementary cascades of bHLH factors are involved in PNS development. Finally, we found that there is a close association between expression of ngn1 and Mash1 and that of two Notch ligands. These observations suggest a basic plan for vertebrate neurogenesis whereby regionalization of the neuroepithelium is followed by activation of a relatively small number of bHLH genes, which are used repeatedly in complementary domains to promote neural determination and differentiation.     

Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime

A computational fluid dynamics (CFD) model of flow in a mixing tank with a single axial-flow impeller was developed with the Fluent^TM software. The model consists of an unstructured hexagonal mesh (158,000 total cells), dense in the region from the surface of the impeller. The flow was modeled as laminar and a multiple reference frame approach was used to solve the discretized equations of motion in one-quarter of a baffled tank. A solution of 0.1% Carbopol in water, a shear-thinning fluid, was found to be clear enough to measure impeller discharge angles using laser Doppler velocimetry. This is the first time that impeller discharge angles have been reported in the literature for a shear-thinning fluid with a hydrofoil impeller. Rheological measurements indicated that the Carbopol solution can be characterized by the power law (K=9,n=0.2) under the range of shear conditions (0.1- expected near the impeller in the mixing tank. The CFD model accurately predicted the dependence of power number and discharge angle on Reynolds number (as predicted by Metzner and Otto), for an A200 (pitched blade turbine or PBT) and an A315 (Hydrofoil) impeller operating in the transitional flow regime (Reynolds numbers: 25-400) with glycerin and 0.1% Carbopol solutions. Subsequently, the results of a systematic CFD study with power law fluids indicated that the power number and discharge angle of an axial-flow impeller in the transitional flow regime depends not only on the Reynolds number (as determined by Metzner and Otto's method) but also on the flow behavior index n. Consequently, an alternative to Metzner and Otto's method was pursued. The results of converged CFD simulations indicate that the near-impeller “average shear rate” increases not only with increasing RPM (as proposed by Metzner and Otto), but also with decreasing flow behavior index (n) and discharge angle in the transitional flow regime. Considering this result, an improved method of estimating the power number and discharge angle for power law fluids in the transitional flow regime is proposed.     

Toughening of polylactide by melt blending with linear low‐density polyethylene

Melt blending of polylactide and linear low‐density polyethylene (LLDPE) was performed in an effort to toughen polylactide. In addition, two model polylactide‐polyethylene (PLLA‐PE) block copolymers were investigated as compatibilizers. The LLDPE particle size and the impact resistance of binary and ternary blends were measured to determine the extent of compatibilization. For the amorphous polylactide (PLA), toughening was achieved only when a PLLA‐PE block copolymer was used as a compatibilizer. For the semicrystalline polylactide (PLLA), toughening was achieved in the absence of block copolymer. To decrease the variability in the impact resistance of the PLLA/LLDPE binary blend, as little as 0.5 wt % of a PLLA–;PE block copolymer was effective. The differences that were seen between the PLA and PLLA binary blends were investigated with adhesion testing. The semicrystalline PLLA did show significantly better adhesion to the LLDPE. We propose that tacticty effects on the entanglement molecular weight or miscibility of polylactide allow for the improved adhesion between the PLLA and LLDPE. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3757–3768, 2003     

Model Adherend Surface Effects on Epoxy Cure Reactions

Adherend surface effects on the amine cure of epoxy resins were investivated using finely divided aluminum oxide as high surface area models for aluminum. Calorimetric analysis of simplified crosslinking systems revealed significantly faster reactions which led to lower glass transition temperature materials for activated aluminum oxide filled samples. A monofunctional amine and epoxy were then utilized to obtain soluble reaction products amenable to molecular characterization. These studies similarly showed an increase in the rate of epoxy consumption in the presence of activated aluminum oxide which was attributed to both an increase in the rate of amine addition to epoxy as well as to epoxy homopolymerization. The latter was not observed in the unfilled mixtures. Such changes in reaction mechanism at the adherend surface have implications for the strength and durability of actual adhesive bonds.     

Native state kinetic stabilization as a strategy to ameliorate protein misfolding diseases: a focus on the transthyretin amyloidoses

Small molecule-mediated protein stabilization inside or outside of the cell is a promising strategy to treat protein misfolding/misassembly diseases. Herein we focus on the transthyretin (TTR) amyloidoses and demonstrate that preferential ligand binding to and stabilization of the native state over the dissociative transition state raises the kinetic barrier of dissociation (rate-limiting for amyloidogenesis), slowing and in many cases preventing TTR amyloid fibril formation. Since T119M-TTR subunit incorporation into tetramers otherwise composed of disease-associated subunits also imparts kinetic stability on the tetramer and ameliorates amyloidosis in humans, it is likely that small molecule-mediated native state kinetic stabilization will also alleviate TTR amyloidoses.