Reactive processing of thermoset/thermoplastic blends: A potential for injection molding

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) is an engineering plastic with high heat distortion temperature. Melt processing of neat PPE is usually accompanied with thermal degradation. The degradation problem is solved by blending with polystyrene to reduce the processing temperature. We propose an alternative using triallylisocyanurate (TAIC). TAIC is a low viscosity liquid that can be cured by peroxide, e.g. α,α′-bis(t-butylperoxy-m-isopropyl)benzene (PBP), to provide a thermoset. The PPE/TAIC mixture was shown to have the upper critical solution temperature (UCST) type phase behavior. At the single-phase regime above UCST and below the cure temperature (∼180°C for PBP), the mixture had a low viscosity, less viscous than a conventional thermoplastic such as PC and PP. That is, a nice window for injection molding was available, e.g., at 100°C to 160°C for a 50/50 blend. After injecting into a hot mold set at cure temperature, the blend cured in a short time (∼80% conversion in 5 min). Then the molded and partly cured material kept its shape and dimensions during post-cure in a hot chamber at higher temperature (e.g. 250°C). Using transmission electron microscopy and dynamic mechanical analyses, it was shown that the cured blend had a bicontinuous two-phase structure with periodic spacings of ∼30 nm, suggesting a structure formation via a spinodal decomposition driven by the increase in molecular weight of TAIC during cure. The cured material showed excellent flexural strength and high chemical resistance.     

Blood Pressure Elevation of Tubular Specific (P)RR Transgenic Mice and Lethal Tubular Degeneration due to Possible Intracellular Interactions between (P)RR and Alternative Renin Products

The prorenin/renin receptor ((P)RR) is a multifunctional protein that is widely distributed in various organs. Despite intensive research for more than 20 years, this receptor has not been fully characterized. In this study, we generated mice overexpressing the tubular epithelial (P)RR gene ((P)RR-TG mice) to test the previously reported functional role of (P)RR by Ramkumar et al. in 2015 using tubular specific (P)RR KO mice. (P)RR-TG mice were maintained and analyzed in individual metabolic cages and were administered angiotensin II blocker (ARB), direct renin inhibitor (DRI), and bafilomycin, that is, vacuolar ATPase (V-ATPase) antagonist. (P)RR-TG mice were hypertensive and had alkalized urine with lower osmolality and Na⁺ excretion. ARB and DRI, but not bafilomycin, concurrently decreased blood pressure. Bafilomycin acidized urine of (P)RR-TG mice, or equivalently this phenomenon restored the effect of overexpressed transgene, suggesting that (P)RR functioned as a V-ATPase in renal tubules. Afterall, (P)RR-TG mice were mated with alternative renin transgenic mice (ARen2-TG), which we identified as intracellular renin previously, to generate double transgenic mice (DT-TG). Lethal renal tubular damage was observed in DT-TG mice, suggesting that intracellular renin may be a ligand for (P)RR in tubules. In summary, (P)RR did not substantially affect the tissue renin-angiotensin system (RAS) in our model of tubular specific (P)RR gene over-expression, but alternative intracellular renin may be involved in (P)RR signaling in addition to conventional V-ATPase function. Further investigations are warranted.     

Synthesis of CeO2-ZrO2 solid solution by glycothermal method and its oxygen release capacity

The glycothermal (GT) reaction of Ce acetate and Zr alkoxide directly yielded CeO₂-ZrO₂ solid solutions in a region of low Ce content ≤40 mol%. Of the CeO₂-ZrO₂ solid solutions obtained by the GT method and subsequent calcination at 500 or 800 °C, the sample with 20 mol% Ce content had the largest BET surface area. This sample exhibited the highest Ce-based oxygen release capacity in the whole Ce/Zr composition range. The oxygen release capacities of CeO₂-ZrO₂ solid solutions synthesized by the GT method were much larger than those of the samples prepared by a coprecipitation (CP) method. The Reitveld analysis and the repetitive reduction-oxidation experiment indicated that the CeO₂-ZrO₂ solid solution synthesized by the GT method has a homogeneous structure as compared with that prepared by the CP method.     

DESCRIPTION OF A THERMO-INELASTIC BODY WITH A MOVING SOLID/LIQUID INTERFACE AND SIMULATION OF THE WELDING PROCESS

Conservation laws of mass, momentum, and energy for the thermo-inelastic body in the region involving the moving interface between the solid and liquid are introduced to derive jump conditions of velocity, stress, and energy on the interface as the sequence of local form for the generalized Reynolds transport theorem. The jump condition of energy is revealed to be the generalized Stefan condition for moving interface problems. The finite element formulation is used to analyze the modes of flow, deformation, and stresses in a melting or solidifying process by employing a viscoplastic constitutive equation that describes the mechanical behavior of both the solid and liquid phases. The mathematical formalism is applied to simulate bead-on plate welding.     

Irradiation effects of boron carbide used as control rod elements in fast breeder reactors

The paper describes radiation effects on 8₄C pellets used as control rod elements in the Enrico Fermi Fast Breeder Reactor. Pellet swelling (Δ$\text{V/V}$) caused by irradiation was less than 1% in which crystal lattice swelling was less than 20%. Many microcracks, a main cause of pellet swelling, appeared in the irradiated pellets. The production of microcracks was related to graphite precipitation in the pellets before irradiation. Open pores which did not exist in the unirradiated pellets were formed in the irradiated ones. In a unit cell of B₄C, the α-axis elongated by 0.025 Å and the $\text{c-}\text{axis}$ shrank by 0.07 Å by irradiation. Moreover, we found three recovery stages which were from room temperature to 400°C, from 400 to 750°C and from 850 to 1100°C. The recovery mechanisms in the irradiated pellets are discussed in terms of the helium behavior.     

Controllable 1D Patterned Assembly of Colloidal Quantum Dots on PbSO4 Nanoribbons

Control of the 1D self‐assembly pattern of colloidal quantum dots (QDs) on PbSO₄ nanoribbon (NRb) templates is achieved. The internal structure of the NRbs is investigated by X‐ray diffraction, revealing the isotropic packing of the PbSO₄ nanoclusters in the NRbs. Colloidal QDs in a chloroform/hexane mixture are adsorbed onto the region close to the edges of the NRbs and form a 1D assembly of straight single line or double lines by controlling the amount of OAm. This is the first demonstration of a densely packed 1D self‐assembly of colloidal QDs with a straight line pattern without the use of any molecular bridge or adhesive. Atomic force microscopy measurements of the NRbs show depressions in the phase profile along the width of the NRbs, corresponding to the position of the 1D QD chain. The amount of adsorbed QDs on the NRbs in solution decreases as the addition of OAm increases, suggesting that additional OAm prevents interaction between the QDs and NRbs but facilitates the uniform adsorption of the 1D assembly. The low‐dimensional self‐assembly of colloidal QDs in this study opens up the possibility for the creation of anisotropically assembled QD superstructures.     

Tetramethylsuccinonitrile in polyvinyl chloride products for food and its release into food-simulating solvents

Summary The content of tetramethylsuccinonitrile (TMSN), the main decomposition product of 2,2-azobis-isobutyronitrile, in polyvinyl chloride (PVC) products used for food packaging, were examined as well as food-simulating solvents. The TMSN concentration in 17 PVC products ranged from below the detection limit, 0.05 mg/kg, up to 523 mg/kg. The release of TMSN from two PVC products into five kinds of food-simulating solvents at 60 °C for 30 min was observed, except for 1 ± 1 g/kg of TMSN in n-heptane from a PVC bottle containing 523±30.4 mg/kg of TMSN. The detection limit of TMSN in the food-simulating solvents was 1 g/kg. When pieces of the bottle were stored in olive oil at 40 °C for 120 days, 5 ± 1 g/kg of TMSN was detected in the oil. The release of TMSN from the pieces of the bottle into olive oil between 80 and 140 °C depended on the formula 1ny = 0.08786x - 5.696,r = 0.9927, wherey is the concentration (g/kg) of TMSN in olive oil, x is the temperature (°C), andr is the correlation coefficient.

---

Tetramethyl-succinonitril in Polyvinylchloridprodukten für Lebensmittel und seine Freisetzung in simulierenden Lösungsmitteln

Zusammenfassung Untersucht wurde der Gehalt von Tetramethyl-Succinonitril (TMSN), dem Hauptzersetzungsprodukt von 2,2-Azobis-iso-butyronitril, in Polyvinylchloridprodukten (PVC) für Lebensmittel im Zusammenhang mit dessen Freisetzung in simulierenden Lösungsmitteln. Die TMSN-Konzentration in 17 PVC-Produkten lag teilweise unterhalb der Meßgrenze; ansonsten lag sie zwischen 0,05 und 523 mg/kg. Ausgenommen von 1 ± 1 g/kg TMSN in n-Heptan aus einer PVC-Flasche, die 523 ± 30,4 mg/kg, TMSN enthielt, wurde bei einer Temperatur von 60 °C innerhalb von 30 min aus zwei PVC-Produkten keine Freisetzung von TMSN in fünf verschiedenen simulierenden Lösungsmitteln beobachtet. Die Erfassungsgrenze von TMSN in den simulierenden Lösungsmitteln lag bei 1 g/kg. Bei Aufbewahrung von Teilen der PVC-Flasche in Olivenöl bei 40 °C für 120 Tage wurden 5 ± 1 g/kg TMSN im Olivenöl erfaßt. Die Freisetzung von TMSN aus der Flasche in das Olivenöl bei Temperaturen zwischen 80 und 140 °C verlief nach der Formel Iny = 0,08786x - 5,696, (r = 0,9927);y = Konzentration (g/kg von TMSN im Olivenöl),x = Temperatur (°C) undr = Korrelationskoeffizient.

     

Fundamental adsorption characteristics of carbonaceous adsorbents for 1,2,3,4-tetrachlorobenzene in a model gas of an incineration plant

Carbonaceous adsorbents such as activated carbon have been used to reduce the emission of organic pollutants from incineration plants. However, with this method, the amount and type of adsorbent to be used are based only on empirical results, which may lead to overuse of the adsorbents. The fundamental adsorption characteristics of several kinds of activated carbon, activated coke, and carbide wood were examined using 1 ,2,3,4-tetrachlorobenzene as an adsorbate. The removal performance and various equilibrium adsorption characteristics of these adsorbents were analyzed using laboratory-scale adsorption equipment. The equilibrium adsorption amount increased by a factor of 1.9-3.2 at 150 degrees C compared with that at 190 degrees C. The effect of the moisture content on adsorption capacity was relatively small in comparison with that of the temperature. The micropore volume for pore diameters of 2 nm or less was the most important factor governing the adsorption capacity for all adsorbents. Activated carbon showed superior adsorption ability compared to activated coke and carbide wood, although all adsorbents were sufficient for practical use.     

Multiresidue determination of quinolones in animal and fishery products by HPLC

A simple and rapid multiresidue method was developed for the determination of twelve quinolones (ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, flumequine, marbofloxacin, nalidixic acid, norfloxacin, ofloxacin, orbifloxacin, oxolinic acid and sarafloxacin) in muscle, liver, chicken eggs, milk, prawn and rainbow trout.The quinolones were extracted from a sample with acetonitrile-water (95 : 5). A fifth part of the filtered extract was diluted with water to keep the acetonitrile ratio at ca. 60%, and passed through a C18 mini-column. The eluate was evaporated to dryness, and the residues were dissolved in methanol-water (30 : 70) for HPLC analysis.The quinolones were separated on a Inertsil ODS-3V column (4.6 mm i.d.x250 mm) with a gradient system of 0.1% phosphoric acid-acetonitrile as the mobile phase, with fluorescence detection.No interfering peak was found on the chromatograms of animal and fishery products, except for milk. The recoveries of the quinolones were over 60% from the animal and fishery products fortified at 0.1 microg/g, and the quantification limits of the quinolones were 0.005 microg/g. This proposed method was found to be effective and suitable for the screening of the quinolones in animal and fishery products.     

Utilization of a direct sandwich ELISA kit for rapid diagnosis of adenovirus hemorrhagic cystitis in a patient with adult T-cell leukemia

We report on a case of adenovirus hemorrhagi cystitis that developed in a 49-year-old woman during intensive chemotherapy for adult T-cell leukemia. Although rapid etiologic diagnosis is essential for the effective management of viral hemorrhagic cystitis, the isolation of adenovirus from urine is often too time-cousuming. We detected the adenovirus antigen in the patient's urine using an Adenoclone direct sandwich ELISA kit (Cambridge Bio Science), which is commonly employed for the diagnosis of adenovirus conjunctivitis. Treatment consisted of intravenous vidarabine and bladder irrigation, which resulted in prompt clinical improvement. The Adenoclone kit was useful for the rapid etiologic diagnosis of adenovirus hemmorrhagic cystitis.