To develop a quantitative method for predicting shrinkage porosity in squeeze casting

In order to secure high strength and high elongation of suspension parts, it is critical to predict shrinkage porosity quantitatively. A new simulation method for quantitative predic'don of shrinkage porosity when replenishing molten metal has been proposed for squeeze casting process. To examine the accuracy of the calculation model, the proposed method was applied to a plate model.     

A bag carrier for continuous intravenous hyperalimentation

We designed a new bag-carrier device system for continuous intravenous hyperalimentation. The patient carries it on his shoulder and can both walk up and down stairs and go out. The use of this device is simple and easy, and was found to increase the patient's opportunity to engage in physical activity.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Mechanical properties of porous methyl silsesquioxane and nanoclustering silica films using atomic force microscope

Mechanical properties of porous methyl silsesquioxane samples with dielectric constant 2.4 and 2.0 and a recently developed nanoclustering silica film samples with dielectric constants 2.3 and 2.0 were evaluated using an atomic force microscope based nanoindentation. It was found that the Young’s modulus and the hardness decrease while the fracture toughness increases with a decrease in the dielectric constant in the same type of material. Moreover, the Young’s modulus and the hardness of the nanoclustering silica films were observed to be at least twice and fracture toughness values ~1.3–1.5 higher than those for methyl silsesquioxane films with similar dielectric constants. The high resolution topographic imaging capability of atomic force microscope was shown to be particularly useful in the measurement of cracks generated by the ultra-low indentation loads, and the evaluation of the fracture toughness of the nanoscale volumes of materials.     

Microstructures of Annealed TiNiSn-Based Alloy Ribbons

The thermoelectric half-Heusler compounds Ti _x NiSn_0.998Sb_0.002 (x = 1.0 to 1.2) and Ti _y Zr_0.25Hf_0.25NiSn_0.998Sb_0.002 (y = 0.5 to 0.65) with nonstoichiometric nominal compositions were prepared by spin-casting and subsequent annealing at 1073 K for 24 h. The dimensionless figure of merit ZT at room temperature was maximized at x = 1.1 and y = 0.6 in Ti-rich compounds through an increase in absolute Seebeck coefficients despite a decrease in electrical conductivities. ZT reached 0.07 at x = 1.1 and 0.14 at y = 0.6. In powder x-ray diffraction analysis, minor phases of β-Sn, TiNi, Ti₂Sn, and Ti₅Sn₃ were observed in addition to a major phase of half-Heusler. The quantity of the minor phases was minimized at x = 1.1 and y = 0.55, where the absolute Seebeck coefficients are maximized. In transmission electron microscopic (TEM) analysis of Ti_0.55Zr_0.25Hf_0.25NiSn_0.998Sb_0.002, crystal grains of the half-Heusler phase, from several hundred nanometers to several micrometers in size, were observed. TEM energy-dispersive spectroscopy measurements indicated that fluctuations of Ti, Zr, and Hf compositions within the Ti-site in the half-Heusler phase may occur. Thermoelectric properties were improved at x = 1.1 and y = 0.6 rather than at the stoichiometric compositions of x = 1.0 and y = 0.5 due to minimization of the precipitate quantities.     

Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics

Silicon nitride (Si₃N₄) was prepared from silicon by a sintered reaction-bonded silicon nitride method using yttria and magnesia as sintering additives. Post-sintering (PS) of nitrided compacts was carried out at 1850°C under a nitrogen pressure of 1 MPa. Effect of PS time on microstructure and dielectric breakdown strength (DBS) of the prepared Si₃N₄ ceramics was evaluated. The DBS was measured using specimens with four different thicknesses (0.30, 0.20, 0.10, and 0.05 mm) in order to examine the thickness dependence. The porosity of the sintered Si₃N₄ decreased by prolonging the PS time, and the full density could be achieved at the PS time of over 6 h. After full densification, rod-like β-Si₃N₄ grains grew up, and their maximum grain size increased from 45.1 to 154.7 μm by prolonging the PS time from 6 to 48 h. The DBS of the thick Si₃N₄ substrates (0.30 mm) showed little variation from 35.4 to 47.0 kV/mm, regardless of the PS time. On the other hand, that of the thin ones (0.05 mm) dramatically decreased from 99.5 to 9.8 kV/mm with increased the PS time from 6 to 48 h. Because the DBS sharply decreased at the thin substrate sintered for longer time in which some large-elongated grains might span the substrate thickness-wise throughout, it was inferred that the interface between β-Si₃N₄ grains and grain boundary phase/intergranular glassy films might be a path of the dielectric breakdown.     

The functional role of CrkII in actin cytoskeleton organization and mitogenesis

Crk is a member of a family of adapter proteins predominantly composed of Src homology 2 and 3 domains, whose role in signaling pathways is presently unclear. Using an in situ electroporation system which permits the introduction of glutathione S-transferase (GST) fusion proteins into cells, we found that c-CrkII bound to p130(cas), but not to paxillin in serum-starved rat-1 fibroblasts overexpressing the human insulin receptor (HIRc cells) in vivo. 17 nM insulin stimulation dissociated the binding of c-CrkII to p130(cas), whereas 13 nM insulin-like growth factor-I, 16 nM epidermal growth factor (EGF), and 10% serum each showed little or no effect. We found that stress fiber formation is consistent with a change in the p130(cas).c-CrkII interactions before and after growth factor stimulation. Microinjection of either GST-Crk-SH2 or -Crk-(N)SH3 domains, or anti-Crk antibody each inhibited stress fiber formation before and after insulin-like growth factor-I, EGF, and serum stimulation. Insulin stimulation by itself caused stress fiber breakdown and there was no additive effect of microinjection. Microinjection of anti-p130(cas) antibody also blocked stress fiber formation in quiescent cells. Microinjection of the Crk-inhibitory reagents also inhibited DNA synthesis after insulin-like growth factor-I, EGF, and serum stimulation, but not after insulin. These data suggest that the complex containing p130(cas).c-CrkII may play a crucial role in actin cytoskeleton organization and in anchorage-dependent DNA synthesis.     

Hydrothermal Synthesis of Oriented Anatase Films Consisting of Columnar Aggregates and Their Wetting Properties

We hydrothermally synthesized anatase films on Ti substrates from transparent aqueous solutions of layered titanate colloids. The morphology and wetting properties of the films were examined. The films consisted of columnar aggregates grown on the Ti substrates, which resulted in high orientation. Randomly oriented films were obtained when alumina was used as a substrate, whereas the sol–gel precoating of a titanium oxide (TiO₂) layer on alumina substrates resulted in similar orientation as that of the films on Ti substrates. Thus, the presence of TiO₂ on the substrate surface plays an important role in the orientation of columnar aggregates. The columnar aggregates were similar in microstructure to the arms of a type of six-pointed star-like anatase aggregate synthesized hydrothermally from the same reaction solutions. They were composed of twins of tapered anatase nanocrystals, which provided a rough film surface. The film surface was highly hydrophilic and oleophilic due to the nanoscale roughness even when the film was not irradiated with UV light.     

EXTRACTION OF URANIUM(IV,VI), PLUTONIUM(III) AND NITRIC ACID BY 30% TRIBUTYL PHOSPHATE (TBP) IN DODECANE

Abstract

Data on the distribution of uranium(IV,VI), plutonium(III) and nitric acid between 30 vol.% TBP in dodecane and aqueous nitrate solutions also containing hydrazine nitrate were mathematically described by empirical equations. This made it possible to present distribution ratios of the extracted components as functions of concentrations and temperature at a single variable being varied and other variables being kept constant. Salting-out and self-salting-out action of the electrolytes present in the system as well as mutual replacement of the extracted components from the organic phase are shown.