Psychological Stress Exacerbates Inflammation of the Ileum via the Corticotropin-Releasing Hormone-Mast Cell Axis in a Mouse Model of Eosinophilic Enteritis

The effects of psychological stress on eosinophilic gastrointestinal disorders have not been elucidated. This study investigated the effects of psychological stress in a mouse model of eosinophilic enteritis (EoN). BALB/c mice were treated with ovalbumin (OVA) to create an EoN model and subjected to either water avoidance stress (WAS) or sham stress (SS). Microscopic inflammation, eosinophil and mast cell counts, mRNA expression, and protein levels of type 2 helper T cell (Th2) cytokines in the ileum were compared between groups. We evaluated ex vivo intestinal permeability using an Ussing chamber. A corticotropin-releasing hormone type 1 receptor (CRH-R1) antagonist was administered before WAS, and its effects were analyzed. WAS significantly increased diarrhea occurrence and, eosinophil and mast cell counts, and decreased the villus/crypt ratio compared to those in the SS group. The mRNA expression of CRH, interleukin IL-4, IL-5, IL-13, eotaxin-1, and mast cell tryptase β2 significantly increased, and the protein levels of IL-5, IL-13, and OVA-specific immunoglobulin E (IgE) also significantly increased in the WAS group. Moreover, WAS significantly increased the intestinal permeability. The CRH-R1 antagonist significantly inhibited all changes induced by WAS. Psychological stress exacerbated ileal inflammation via the CRH-mast cell axis in an EoN mouse model.     

Accelerator-driven system for transmutation of high-level waste

The accelerator-driven transmutation system has been studied at the Japan Atomic Energy Research Institute. This system is a hydrid system which consists of a high intensity accelerator, a spallation target and a subcritical core region. In the conceptual design study, two types of system concepts, sodium cooled and lead-bismuth cooled system, are being studied. In this study, we fucus on our lead-bismuth cooled accelerator-driven transmutation system to investigate basic characteristics. The fuel compositions were optimized for efficient transmutation of minor actinide. The transmutation of long-lived fission products was also considered.     

Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent

We present the special arterial fluid mechanics techniques we have developed for patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent. These techniques are used in conjunction with the core computational technique, which is the space?Ctime version of the variational multiscale (VMS) method and is called ??DST/SST-VMST.?? The special techniques include using NURBS for the spatial representation of the surface over which the stent mesh is built, mesh generation techniques for both the finite- and zero-thickness representations of the stent, techniques for generating refined layers of mesh near the arterial and stent surfaces, and models for representing double stent. We compute the unsteady flow patterns in the aneurysm and investigate how those patterns are influenced by the presence of single and double stents. We also compare the flow patterns obtained with the finite- and zero-thickness representations of the stent.     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Effects of Sampling Tube Geometry on Soft Clayey Sample Quality Evaluated by Nondestructive Methods

Sample disturbance caused by difference in sampling tube geometry was evaluated by two nondestructive methods: the measurement of the residual effective stress (p_r') by ceramic disc; and the use of the bender element to ascertain the shear wave velocity (V_s), and thus the maximum shear modulus (G_BE). Samples were measured under atmosphere, i.e., not under confined stress conditions. The soil samples were obtained from two sources: reconstituted Kasaoka clay prepared in the laboratory, and at the test site at Takuhoku, Hokkaido, Japan. Samplers with different geometrical designs, referring to the Japanese standard stationary piston sampler, were used for the model ground and field sampling. The geometrical effects of the sampling tube, for example, the thickness of the tube wall, the edge angle, and the existence of a piston were carefully examined. The quality of the samples taken with different samplers was evaluated by p_r' and G_BE, values which were normalized by the in situ vertical effective stress (σ'_vo) and G_f measured by the seismic cone test in the field. It was found from these studies that p_r'/σ'_vo and G_BE/G_f vary considerably due to the geometry of the sampler, with the edge angle of sampling tubes being the most important feature in obtaining high quality samples. The wall thickness, and thus, the area ratio of the sampler is not critical to the sample quality if the edge angle is sharp enough. The existence of the piston does not significantly influence the sample quality in field samples. Furthermore, the correlation between G_BE and p_r' was also investigated, and it was found that the two parameters are strongly dependent.     

On-line control of feed-speed in circular sawing

An adaptive control optimization system was developed to produce a desired surface finish roughness by automatic control of the work-piece feed-rate in circular sawing. The system developed in this study consists of the interconnection of an adaptive controller with a numerically controlled circular saw. The AE signals and cutting forces were measured to monitor the machining process continuously in this system. The signals were provided to the adaptive controller to evaluate the surface finish roughness and adjust the workpiece feed-rate automatically in the machining process. Sensing of AE signals and of cutting forces was compared to determine which technique is more convenient. Experiments were carried out with a carbide-tipped circular saw. Cross cutting was done with counter-cutting during the experiments. The cutting parameters controlled were workpiece feed-rates and cutting speeds. Japanese beech (Fagus crenata Blume) and Yezo spruce (Picea jezoensis Carr.) were used as the workpiece. Experimental results indicated that adaptive control optimization took place in the system developed for circular sawing. The desired surface finish roughness was produced by automatic control of the workpiece feed-rate using the sensing technique of AE signals as well as that of cutting force. However, the system using AE signals is more convenient than taht using cutting force.     

A Quaternary van der Waals Ferromagnetic Semiconductor AgVP2Se6

The recent realization of 2D magnetism in van der Waals (vdWs) magnets holds promise for future information technology. However, the vdWs semiconducting ferromagnets, which remain rare, are especially important in developing 2D magnetic devices with new functionalities due to the possibility of simultaneous control of the carrier charge and spin. Metal thiophosphate (MTP), a multifunctional vdWs material system that combines the sought‐after properties of complex oxides, is a promising vdWs magnet system. Here, single crystals of a novel vdWs ferromagnetic semiconductor MTP AgVP₂Se₆ with a room‐temperature resistivity of 1 Ω m are successfully synthesized. Due to the nature of vdWs bonding along the c‐axis, the magnetic properties of the few‐layer AgVP₂Se₆ with different thicknesses are characterized on the exfoliated samples. The AgVP₂Se₆ flakes exhibit significant thickness‐dependent magnetic properties, and a rectangular hysteresis loop with a large coercive field of 750 Oe at 2 K and an undiminished Curie temperature of 19 K are observed in the 6.7 nm AgVP₂Se₆ flake. The discovered vdWs ferromagnet AgVP₂Se₆ with semiconducting behavior will provide alternative platforms for exploring 2D magnetism and potential applications in spintronic devices.     

Electron holographic 3-D nano-analysis of Au/TiO2 catalyst at interface

Three-dimensional (3-D) nanostructures of gold catalysts supported on TiO2 were analysed by electron holography and high-resolution electron microscopy. The contact angle of the gold particle on TiO2 tended to be >90 degrees in the case of gold particles with a size (height) of >4 nm and it tended to be <90 degrees for gold particles with a height of <2 nm. The change in morphology increases the perimeter at the Au/TiO2 interface as the particle size decreases. This change in 3-D structure should be attributed to a change in electronic structure at the interface. It was found that electron holography enabled 3-D analysis at the atomic level and was effective for analysing nanostructured particles.     

Enhanced Hole‐Transporting Behavior of Discotic Liquid‐Crystalline Physical Gels

Discotic liquid‐crystalline (LC) physical gels have been prepared by combining the self‐assembled fibers of a low‐molecular‐weight gelator and semiconducting LC triphenylene derivatives. The hole mobilities of the discotic LC physical gels measured by a time‐of‐flight method become higher than those of LC triphenylenes alone. The introduction of the finely dispersed networks of the gelator in the hexagonal columnar phases may affect the molecular dynamics of the liquid crystals, resulting in the enhancement of hole transporting behavior in the LC gel state.