Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Direct observation of the initial process of Ostwald ripening using spherical aberration-corrected transmission electron microscopy

We study in situ behavior of platinum single atoms on amorphous carbon (a-carbon) using a spherical aberration-corrected transmission electron microscope (AC-TEM). Diffusion of single atoms, bi-atoms, clusters (<1?nm) and nanoparticles (<3?nm) was recorded in the same image with a time resolution of 1?s, and such diffusion matches the expected mechanism of Ostwald ripening, which was seen on these samples. In situ AC-TEM shows promise for dynamical observation of single atom diffusion, which is important for understanding nanosized catalysts and ceramic sintering processes. We apply in situ AC-TEM to image platinum (Pt) nanoparticles on a-carbon, which is a model catalyst system for the real Pt electrode catalysts using alloys and core-shell structures supported on carbon/oxide composite materials in the proton exchange membrane fuel cell.     

Stacking faults in an epitaxially grown PbTiO3 thick film and their size distribution

The microstructure of an epitaxial PbTiO₃ thick film, grown on a SrRuO₃/SrTiO₃ substrate at 600 °C by pulsed-MOCVD method, was investigated by using transmission electron microscopy. A number of extrinsic or intrinsic stacking faults were observed in the epitaxial PbTiO₃ thick film and they were parallel to the (0 0 1) plane of the PbTiO₃. We also investigated the size distribution of these stacking faults. The width of these stacking faults along the [1 0 0] axis of the PbTiO₃ was very small, ranging from 2 to 13 nm. It was also revealed that the size distribution of stacking faults depends on the position in the film: near the surface, near the substrate, near threading dislocations, and near 90° domain boundaries.     

Development of Millimeter Wave Fabry-Pérot Resonator for Simultaneous Electron-Spin and Nuclear Magnetic Resonance Measurement

We report a Fabry-Pérot resonator with spherical and flat mirrors to allow simultaneous electron-spin resonance (ESR) and nuclear magnetic resonance (NMR) measurements that could be used for double magnetic resonance (DoMR). In order to perform simultaneous ESR and NMR measurements, the flat mirror must reflect millimeter wavelength electromagnetic waves and the resonator must have a high Q value (Q?>?3000) for ESR frequencies, while the mirror must simultaneously let NMR frequencies pass through. This requirement can be achieved by exploiting the difference of skin depth for the two frequencies, since skin depth is inversely proportional to the square root of the frequency. In consideration of the skin depth, the optimum conditions for conducting ESR and NMR using a gold thin film are explored by examining the relation between the Q value and the film thickness. A flat mirror with a gold thin film was fabricated by sputtering gold on an epoxy plate. We also installed a Helmholtz radio frequency coil for NMR and tested the system both at room and low temperatures with an optimally thick gold film. As a result, signals were obtained at 0.18 K for ESR and at 1.3 K for NMR. A flat-mirrored resonator with a thin gold film surface is an effective way to locate NMR coils closer to the sample being examined with DoMR.     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Observation of metal on Si(0 0 1) by STM/STS and its consideration based on the first principles calculations

Local density of states (LDOS) is obtained by the first principles calculation based on the density functional theory on the Si(0 0 1)2 × 1 surface and on the surface with an Al dimer. At an Al dimer, LDOS has a high intensity in the conduction band region, which cannot be seen on the Si(0 0 1)2 × 1 surface. This tendency is observed in STS measurements as well. The possibility for a microelementary analysis is presented by applying this method to other metal atoms on the Si surface. Furthermore, it is pointed out that STS measurements should be always performed at the same tip-sample separation to obtain reproducible STS spectrums.     

Association of Ligamentum Flavum Hypertrophy with Adolescent Idiopathic Scoliosis Progression—Comparative Microarray Gene Expression Analysis

The role of the ligamentum flavum (LF) in the pathogenesis of adolescent idiopathic scoliosis (AIS) is not well understood. Using magnetic resonance imaging (MRI), we investigated the degrees of LF hypertrophy in 18 patients without scoliosis and on the convex and concave sides of the apex of the curvature in 22 patients with AIS. Next, gene expression was compared among neutral vertebral LF and LF on the convex and concave sides of the apex of the curvature in patients with AIS. Histological and microarray analyses of the LF were compared among neutral vertebrae (control) and the LF on the apex of the curvatures. The mean area of LF in the without scoliosis, apical concave, and convex with scoliosis groups was 10.5, 13.5, and 20.3 mm², respectively. There were significant differences among the three groups (p < 0.05). Histological analysis showed that the ratio of fibers (Collagen/Elastic) was significantly increased on the convex side compared to the concave side (p < 0.05). Microarray analysis showed that ERC2 and MAFB showed significantly increased gene expression on the convex side compared with those of the concave side and the neutral vertebral LF cells. These genes were significantly associated with increased expression of collagen by LF cells (p < 0.05). LF hypertrophy was identified in scoliosis patients, and the convex side was significantly more hypertrophic than that of the concave side. ERC2 and MAFB genes were associated with LF hypertrophy in patients with AIS. These phenomena are likely to be associated with the progression of scoliosis.     

Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging

Melt pool behaviour and the characteristics of the surrounding metal powder during selective laser melting (SLM) are captured using high-speed imaging, and the influence of the substrate temperature and the line building sequence on the formation of the built structure and the generation of spatter particles is experimentally investigated. The results indicate that the substrate temperature has a measurable effect on the formation of droplets and the generation of spatter particles, while the volume specific energy density of the process was the principal factor affecting the built structure.