The effects of observational feedback on treatment integrity in school-based behavioral consultation.

Evaluated the effects of performance feedback on levels of treatment integrity in school-based behavioral consultation. Three teachers employed in a residential treatment community were responsible for treatment implementation. Treatment integrity was defined as the percentage of 2-min intervals during which contingent teacher reinforcement for student on-task behavior was directly observed. Teacher and child behavior were monitored across baseline, traditional consultation, and consultation with performance feedback conditions in a multiple baseline design. Following a Problem Identification Interview and Problem Analysis Interview (J. R. Bergan, 1977), mean levels of treatment integrity for the 3 teachers ranged from 9% to 37%. The addition of a performance feedback package increased treatment integrity for all 3 teachers to levels ranging from 60% to 83%. The findings contribute to a growing literature supporting the need for direct assessment of treatment integrity in school-based consultation research and practice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of polyimide-epoxy composites

The formation of a three dimensional network of crosslinked epoxy leads all unmodified epoxies to have inherent brittleness and relatively low degradation temperatures. Polyimides, on the other hand, are widely used for applications that require high degrees of flexibility and thermal resistance. Here, we have focused on the preparation of epoxy systems cured with polyamic acids instead of traditional amino-group-containing hardening agents. The cure behavior and potential reaction mechanisms of EPON 828 resin and polyamic acid mixtures were evaluated by DSC and TGA. Thermal analysis showed a complex reaction sequence taking place in the mixture and also determined the extent of reaction of the polyamic acid with itself and the competitive reaction of the polyamic acid with the epoxy. The compositions of the mixtures were varied to see the dependence of the cure behavior on component concentrations. Solutions of the two components did not phase separate and also phase separation was not apparent either optically or microscopically in the cured samples. This phase behavior was attributed to a unique in situ reaction. A novel solvent system for the polyamic acid precursor was also used.     

Behavioral and cardiovascular responses to interpersonal challenges among male offspring of essential hypertensives.

Behavioral, cardiovascular, and self-report measures of cognitive and affective responses to 2 interpersonal challenges were examined among 20 men with a positive (FH+) and 20 with a negative (FH–) family history of hypertension. Heart rate (HR) and blood pressure (BP) were measured throughout the laboratory session; Ss were requested to self-report positive and negative conditions, state anger, and state anxiety that occurred during interactions with a male and female confederate. Behavioral responses to interpersonal tasks were videotaped, coded, and categorized into 4 major groupings (positive verbal, positive nonverbal, negative verbal, and negative nonverbal). FH+ individuals exhibited significantly higher resting HR and systolic BP reactivity to both interactions than FH– counterparts. Analyses of behavioral responses for both interactions revealed significantly more negative verbal and nonverbal behavior and less positive nonverbal behavior among FH+ as compared with FH– Ss. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Granulation tissue polyposis associated with carcinoid tumours of the small intestine

We report two patients with ileal carcinoid tumours which were associated with polyps due to mucosal granulation tissue proliferation. In both cases the tumours had extensively infiltrated the small bowel wall and mesentery, and one had hepatic metastases. The mucosal surface of each specimen showed numerous, pale brown, sessile polyps which were restricted to the intestinal segment involved by carcinoid tumour, although not always closely related to neoplastic cells. The polyps were formed by the proliferation of capillaries, smooth muscle cells and myofibroblasts as demonstrated by immunohistochemistry and electronmicroscopy.     

Rule-based supervisory control of a two-link flexible manipulator

In this paper, we propose a two level hierarchical control strategy to achieve accurate end-point position of a planar two-link flexible manipulator. The upper level consists of a feedforward rule-based supervisory controller that incorporates fuzzy logic, whereas the lower level consists of conventional controllers that combine shaft position-endpoint acceleration feedback for disturbance rejection properties and shaping of the (joint) actuator inputs to minimize the energy transferred to the flexible modes during commanded movements. The effectiveness of this hierarchical control strategy is verified by experimental results for various movements of the links, in various configurations. In particular, we illustrate how the hierarchical intelligent control strategy performs better than conventional control techniques for endpoint position control in the presence of flexure effects.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

A Low-Complexity Circuit for On-Sensor Concurrent A/D Conversion and Compression

A low-complexity circuit for on-sensor compression is presented. The proposed circuit achieves complexity savings by combining a single-slope analog-to-digital converter with a Golomb-Rice entropy encoder and by implementing a low-complexity adaptation rule. The adaptation rule monitors the output codewords and minimizes their length by incrementing or decrementing the value of the Golomb-Rice coding parameter k. Its hardware implementation is one order of magnitude lower than existing adaptive algorithms. The compression circuit has been fabricated using a 0.35 muM CMOS technology and occupies an area of 0.0918 . Test measurements confirm the validity of the design.     

Wireless LAN Security: Things You Should Know about WLAN Security

Given the well-publicised security holes in baseline wireless LAN (WLAN) standards, just how should security-conscious network managers proceed with safeguarding their wireless environments?     

Extending the color gamut and dynamic range of an sRGB image using a residual image

Image sources, such as digital camera captures and photographic negatives, typically have more information than can be reproduced on a photographic print or a video display. The information that is lost during the tone/color rendering process relates to both the extended dynamic range and color gamut of the original scene. In conventional photographic systems, most of this additional information is archived on the photographic negative and can be accessed by adjusting the way the negative is printed. However, most digital imaging systems have traditionally archived only a rendered video RGB image. As a result, it is not possible to make the same sorts of image manipulations that historically have been possible with conventional photographic systems. This suggests that there would be an advantage to storing images using an extended dynamic range/color gamut color encoding. However, because of file compatibility issues, digital imaging systems that store images using color encoding other than a standard video RGB representation (e.g., sRGB) would be significantly disadvantaged in the marketplace. In this article, we describe a solution that has been developed to maintain compatibility with existing file formats and software applications, while simultaneously retaining the extended dynamic range and color gamut information associated with the original scenes. With this approach, the input raw digital camera image or film scan is first transformed to the scene‐referred ERIMM RGB color encoding. Next, a rendered sRGB image is formed in the usual way and stored in a conventional image file (e.g., a standard JPEG file). A residual image representing the difference between the original extended dynamic range image and the final rendered image is formed and stored in the image file using proprietary metadata tags. This provides a mechanism for archiving the extended dynamic range/color gamut information, which is normally discarded during the rendering process, without sacrificing interoperability. Appropriately enabled applications can decode the residual image metadata and use it to reconstruct the ERIMM RGB image, whereas applications that are not aware of the metadata will ignore it and only have access to the sRGB image. The residual image is formed such that it will have negligible pixel values for those portions of the image that lie within the sRGB gamut, and will therefore be highly compressible. Tests on a population of 950 real customer images have demonstrated that the extended dynamic range scene information can be stored with an average file size overhead of about 8% compared to the sRGB images alone. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 251–266, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10160