Design development of aggregates cooling systems for hot weather concreting

Using hot aggregates, in concrete production, results in a drop in compressive strength of the produced concrete. Various methods have been proposed for cooling concrete aggregates. This paper proposes new two designs for aggregates cooling systems for various production rate demands. Conveyor system for small to moderate production rates and rotating drum for high production rates. Simulation of the heat flow during the cooling process over the conveyor and through the drum are analyzed with the objective of understanding the effect of the various design parameters and achieving minimum cooling time with the least possible power. Finite element models for the new designs are proposed and discussed. The results of the finite element analysis of the new designs are presented for various initial conditions and cooling rates.     

Bioconversion of shrimp shell waste for the production of antioxidant and chitosan used as fruit juice clarifier

The pH, proteolytic activity, extent of demineralisation and deprotenisation of shrimp waste were studied during 7 days of fermentation using Pseudomonas aeruginosa A2. After 3 days, pH dropped from 7.0 to 4.4 and then remained constant. Simultaneously, a demineralisation of 92% was achieved. However, protease activity reached its highest level (1230 U mL^?1) after 1 day of incubation, and a protein removal of 90% was achieved. Chitin obtained was converted to chitosan. This chitosan, with 73% deacetylation, was tested for clarification of different fruit juices. It was observed that low concentrations of chitosan (below to 1%) greatly increase the clarity of juices without affecting the nutritional value. The antioxidant activity of the hydrolysates produced during fermentation was tested. Hydrolysate obtained after 3 days showed the strongest scavenging activity (90%), which was comparable to the positive control BHA; however, that obtained after 1 day exhibited the highest ferric‐reducing antioxidant power (OD 700 nm = 1.7).     

Techno‐economic optimization of hybrid power system using genetic algorithm

This paper presents an optimum sizing methodology to optimize the hybrid energy system (HES) configuration based on genetic algorithm. The proposed optimization model has been applied to evaluate the techno‐economic prospective of the HES to meet the load demand of a remote village in the northern part of Saudi Arabia. The optimum configuration is not achieved only by selecting the combination with the lowest cost but also by finding a suitable renewable energy fraction that satisfies load demand requirements with zero rejected loads. Moreover, the economic, technical and environmental characteristics of nine different HES configurations were investigated and weighed against their performance. The simulation results indicated that the optimum wind turbine (WT) selection is not affected only by the WT speed parameters or by the WT rated power but also by the desired renewable energy fraction. It was found that the rated speed of the WT has a significant effect on optimum WT selection, whereas the WT rated power has no consistent effect on optimal WT selection. Moreover, the results clearly indicated that the HES consisting of photovoltaics (PV), WT, battery bank (Batt) and diesel generator (DG) has superiority over all the nine systems studied here in terms of economical and environmental performance. The PV/Batt/DG hybrid system is only feasible when wind resource is very limited and solar energy density is high. On the other hand, the WT/Batt/DG hybrid system is only feasible at high wind speed and low solar energy density. It was also found that the inclusion of batteries reduced the required DG and hence reduced fuel consumption and operating and maintenance cost. Copyright © 2014 John Wiley & Sons, Ltd.     

An iterative learning approach for network contraction: Path finding problem in stochastic time‐varying networks

Path finding problem has a broad application in different fields of engineering. Travel time uncertainty is a critical factor affecting this problem and the route choice of transportation users. The major downside of the existing algorithms for the reliable path finding problem is their inefficiency in computational time. This study aims to develop a network contraction approach to reduce the network size of each specific origin and destination (OD) pair in stochastic time‐dependent networks. The network contraction is based on the comparison of optimistic and pessimistic solutions resulting from minimum and maximum travel time realizations of a Monte‐Carlo simulation (MCS)‐based approach. In this respect, the researchers propose a learning approach to utilize the information of the realizations in the initial iterations of the MCS approach. Implementation of this approach is in place for several OD pairs of two real‐world large‐scale applications. First, it is calibrated for the Chicago downtown network; the performance and accuracy of the proposed approach are investigated by comparing the results against that of the approach without any network contraction. In addition, the Salt Lake City network illustrates the transferability of the approach to other networks. The results demonstrate significant computational improvements, with an acceptable accuracy level relative to the approach without network contraction.     

Antibacterial effects of chitosan coating containing Mentha aquatica L. essence against Escherichia coli,Staphylococcus aureus and Listeria monocytogenes in Iranian white cheese

The effect of a chitosan coating and Mentha aquatica L. essence on Iranian white cheese was investigated. Results showed 100% inhibition of Escherichia coli growth using 1.5% essence after 10 days. After 15 days of incubation, the Staphylococcus aureus population was reduced by 44.2%, 70.0%, and 88.5% using 0.5, 1.0 and 1.5% essence, respectively. After 15 days, Listeria monocytogenes growth was inhibited by 63.84%, 70.12%, and 85.9% using 0.5, 1.0, and 1.5% essence, respectively. Inhibition zone diameter studies also confirmed the antibacterial effects of applied coating against all the above‐mentioned bacteria in Iranian white cheese.     

Convolutional neural networks for the classification of chest X-rays in the IoT era

Multimedia Tools and Applications - Chest X-ray medical imaging technology allows the diagnosis of many lung diseases. It is known that this technology is frequently used in hospitals, and it is...     

An iterative code to investigate heat pump performance improvement by exhaust gases heat recovery

The race between the development of technologies and energy demand has drawn the guidelines of energy strategies for the next two decades. Indeed, the governmental organizations as well as the private sectors are spending huge effort to come up with new adequate strategies that allow to decrease energy consumption. Having said that, heat pump becomes an essential system in our daily life not only in residential building but also in hospital, industrial and touristic building. Nonetheless, (HP)s have very high energy consumption rate. Thus, and to be in line with the new trends in energy strategies, it is convenient to find new methods to enhance the performance of heat pump in order to reduce energy consumption. In this frame, the present paper suggests an approach to enhance the performance the heat pumps using the heat recovery from generators. For this purpose, an in-house code is developed allowing to simulate two new proposed systems (condenser upstream exhaust gases heat recovery system (CU-EGHRS) and condenser downstream exhaust gases heat recovery system (CD-EGHRS). It has been shown that the increase in the performance of the heat pump depends on the capacity of the generator. Also, the CD-EGHRS is shown to be the best. For instance, in the case of a 15 kVA generator, the enhancement could reach 42% for the CD-EGHRS. This enhancement increases to 5640% in the case of a 180 kVA generator.     

Linear model-based estimation of blood pressure and cardiac output for Normal and Paranoid cases

Provisioning a generic simple linear mathematical model for Paranoid and Healthy cases leading to auxiliary investigation of the neuroleptic drugs effect imposed on cardiac output (CO) and blood pressure (BP). Multi-input single output system identification in consistency with the Z-Transform is considered an essential role in the exploration of linear discrete system identification. Twenty Paranoid and 20 Healthy peer cases have been chosen to lie under study. The generated CO model forming two poles and two zeros produced a root–mean-squared error (RMSE) of 0.109 and an average RMSE of 1.39 due to Paranoid cases. On the other hand, Healthy cases obtained model held three poles and two zeros with RMSE equal to 0.17 and an average of 0.63. The BP model with four poles and two zeros showed a 2.15 and 21.69 for RMSE and an average RMSE, respectively, for Paranoid cases, whereas seven poles and two zeros provided an RMSE of 5.7 and an average RMSE of 17.19 for Healthy cases. The obtained results were provided a generic models of CO with promising outcomes for Paranoid and Healthy cases. Moreover, the BP model has less and yet acceptable results in both Paranoid and Healthy cases.