Proteolytic degradation of myofibrillar components by carp cathepsin L

Carp cathepsin L, which is the best candidate to produce textural change in the arai-treated carp fillet, exhibited maximum hydrolytic activity for Z-Phe-Arg-MCA and soluble casein at pH 5·0–5·5. The proteolytic action of the enzyme was evaluated by complete degradation of various carp myofibrils at pH 5·0 over 30 min and by potent degradation of the same proteins at pH 5·5–6·0 over 20 h. All myofibrillar components were partially degraded by the enzyme at pH 6·5–7·0, but varying amounts of them remained undegraded after 20 h. These findings indicate that carp cathepsin L degrades not only carp myofibrillar components but also their resultant products between pH 5·0 and 7·0 and that it markedly acts on myosin heavy chain, α-actinin and troponin-T and -I. Carp cathepsin L likely contributes to postmortem muscle tenderisation of carp fillet over an extensive pH range during storage. © 1998 SCI.     

编码16DAPSK信号解调译码新方法

基于子载波采用16阶差分幅度相移键控(16DAPSK)的正交频分复用(OFDM)系统,提出并分析了编码16DAPSK信号的一种新的简单易行的比特软输出解调译码方法。仿真结果表明,在高斯信道、平坦Rayleigh衰落信道和多径Rayleigh衰落信道下,采用编码速率为3/4的punctured卷积码与16DAPSK信号的硬输出解调译码方法相比,系统的误码性能可改善约1.2dB。新方法应用在日本CRL开发的100Mbps毫米波16DAPSK-OFDM宽带移动接入实验系统,将进一步提高系统误码性能。     

Crystallization Kinetics of Mullite in Alumina–Silica Glass Fibers

The mechanism of mullite crystallization in Al₂O₃-SiO₂ glass fibers with compositions of 49 and 69 mass% Al₂O₃ was investigated using isothermal methods. The activation energies ( E _a) of the nucleation and nucleation-growth of mullite were obtained from the temperature dependence of the incubation times and rate constants of mullite formation, respectively. The formation of mullite in both glasses occurred in two stages. The amount of mullite increased very steeply in the first stage within very short firing time, whereas the increase was more gradual in the second stage. The E _a values for nucleation and nucleation-growth in the first stage were 864 and 1288 kJ/mol in the 49-mass%-Al₂O₃ glass fiber and 980 and 1138 kJ/mol in the 69-mass%-Al₂O₃ glass fiber, respectively. Arrhenius plots of the second-stage data showed that the slope ratios were different at temperatures below and above 1200°C. The E _a values at <1200°C were 1195 and 1099 kJ/mol in the 49- and 69-mass%-Al₂O₃ glass fibers, whereas those at >1200°C were 696 and 645 kJ/mol, respectively. Observation of the microstructures and crystallite-size data indicates that the crystallization of mullite proceeds via three different mechanisms: nucleation, nucleation–growth, and coalescence of mullite grains.     

MgSiN2 Addition as a Means of Increasing the Thermal Conductivity of β-Silicon Nitride

Si₃N₄ powders with the concurrent addition of Yb₂O₃ and MgSiN₂ were sintered at 1900°C for 2–48 h under 0.9 MPa nitrogen pressure. Microstructure, lattice oxygen content, and thermal conductivity of the sintered specimens were evaluated and compared with Si₃N₄, Yb₂O₃, and MgO addition. MgSiN₂ addition was effective for improving the thermal conductivity of Si₃N₄ ceramics, and a material with high thermal conductivity over 140 W·(m·K)⁻¹ could be obtained. For both specimens, lattice oxygen content was decreased with sintering time. However, the thermal conductivity of the MgSiN₂-doped specimen was slightly higher than the MgO-doped specimen with the same oxygen content.     

Effect of the addition of transition metals to Pt/Ba/Al2O3 catalyst on the NOx storage-reduction catalysis under oxidizing conditions in the presence of SO2

The NO_x storage-reduction catalysis under oxidizing conditions in the presence of SO₂ has been investigated on Pt/Ba/Fe/Al₂O₃, Pt/Ba/Co/Al₂O₃, Pt/Ba/Ni/Al₂O₃, and Pt/Ba/Cu/Al₂O₃ catalysts compared with Pt/Ba/Al₂O₃, Pt/Fe/Al₂O₃, Pt/Co/Al₂O₃, Pt/Ni/Al₂O₃, Pt/Cu/Al₂O₃ and Pt/Al₂O₃ catalysts. The NO_x purification activity of Pt/Ba/Fe/Al₂O₃ catalyst was the highest of all the catalysts investigated in this paper after an aging treatment. That of the aged Pt/Ba/Co/Al₂O₃ and Pt/Ba/Ni/Al₂O₃ catalysts was essentially the same as that of the aged Pt/Ba/Al₂O₃ catalyst, while that of the aged Pt/Ba/Cu/Al₂O₃ and Pt/Cu/Al₂O₃ catalysts was substantially lower than the others.

The Fe-compound on the aged Pt/Ba/Fe/Al₂O₃ catalyst has played a role in decreasing the sulfur content on the catalyst after exposure to simulated reducing gas compared with the Pt/Ba/Al₂O₃ catalyst without the Fe-compound. XRD and EDX show that the Fe-compound inhibits the growth in the size of BaSO₄ particles formed on the Pt/Ba/Fe/Al₂O₃ catalyst under oxidizing conditions in the presence of SO₂ and promotes the decomposition of BaSO₄ and desorption of the sulfur compound under reducing conditions.     

Growth of magnetite epitaxial thin films by gas flow sputtering and characterization by FMR

The growth of magnetite (Fe₃O₄) epitaxial thin films on MgO substrates were studied by using gas flow sputtering (GFS). Reflection high‐energy electron diffraction (RHEED) and atomic force microscopy showed that the surfaces of the films obtained at a substrate temperature T_s of 300 °C and oxygen flow rates F_O2 of 0.12 − 0.18 sccm are fairly flat for the film thickness of about 200 nm. The saturation magnetization and resistivity were close to the reported values of Fe₃O₄ for T_s= 300°C and F_O2 = 0.12–0.20sccm. The films obtained at T_s= 300°C and F_O2=0.16 and 0.18 sccm showed Verwey transition, which is persuasive evidence of the formation of Fe₃O₄. The epitaxial relationship of Fe₃O₄(100)//MgO(100) and Fe₃O₄[100]//MgO[100] was confirmed by using ferromagnetic resonance (FMR), and the anisotropy constants and magnetization were obtained by the fitting of resonance‐field versus applied‐field angle curves. © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Low-Temperature Synthesis of Aluminum Silicon Carbide Using Ultrafine Aluminum Carbide and Silicon Carbide Powders

The conditions for preparing α-aluminum silicon carbide (α-Al₄SiC₄) were examined by heating stoichiometric mixtures of ultrafine A1₄C₃ and SiC powders with sizes of <0.1 μm at and below 1600°C. The starting A1₄C₃ powder was obtained by the pyrolysis of trimiethylaluminum; the starting SiC powders were obtained by the pyrolyses of triethylsilane (3ES), tetraethylsilane (4ES), and hexamethyldisilane (6MDS). The reactivity of SiC with Al₄C₃ to form α-Al₄SiC₄ varies according to the kind of starting alkylsilane: 3ES > 4ES > 6MDS. The reaction of 3ES-derived SiC with A1₄C₃ produced α-Al₄SiC₄ at temperatures as low as 1400°C for 240 min, regardless of the presence of A1₄C₃ (trace). Only α-Al₄SiC₄ was formed at and above 1500°C for 60 min; the crystal growth was appreciable.     

Effect of Divalent Cation Additives on the γ-Al2O3-to-α-Al2O3 Phase Transition

The effect on the γ-Al₂O₃-to-α-Al₂O₃ phase transition of adding divalent cations was investigated by differential thermal analysis, X-ray diffractometry, and surface-area measurements. The cations, Cu²⁺, Mn²⁺, Co²⁺, Ni²⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, were added by impregnation, using the appropriate nitrate solution. These additives were classified into three groups, according to their effect: (1) those with an accelerating effect (Cu²⁺ and Mn²⁺), (2) those with little or no effect (Co²⁺, Ni²⁺, and Mg²⁺), and (3) those with a retarding effect (Ca²⁺, Sr²⁺, and Ba²⁺). The crystalline phase formed by reaction of the additive with γ-Al₂O₃ at high temperature was a spinel-type structure in groups (1) and (2) and a magnetoplumbite-type structure in group (3). In groups (2) and (3), a clear relationship was found between the transition temperature and the difference in ionic radius of Al³⁺ and the additive (Δ r ): The transition temperature increased as Δ r increased. This result indicates that additives with larger ionic radii are more effective in suppressing the diffusion of Al³⁺ and O²⁻ in γ-Al₂O₃, suppressing the grain growth of γ-Al₂O₃, and retarding the transformation into α-Al₂O₃.     

Additive effect of cobalt-exchanged coal on the liquefaction of subbituminous coal

In comparison with the liquefaction (420 °C, with tetralin and elemental sulfur) of the proton-exchanged Adaro subbituminous coal with complex (metallocene or metal carbonyl) of cobalt, nickel or iron, the coal liquefaction was enhanced significantly on the liquefaction of cation (Co²⁺, Ni²⁺ or Fe²⁺) exchanged Adaro coal. However, for several kinds of subbituminous coal, metal cations hardly exchange due to the small content of carboxyl group in coal. Therefore, the simultaneous liquefaction of subbituminous coal and cobalt-exchanged coal were carried out in this study. Further, the simultaneous liquefaction of lower rank and subbituminous coals with Co₂(CO)₈ was carried out to compare the catalytic effect of cobalt derived from either the exchanged coal or Co₂(CO)₈. The catalytic effect of cobalt in the exchanged Morwell brown coal was appeared as the decrease of residue yield on the liquefaction with Yilan subbituminous coal. On the other hand, there was little enhancement on the simultaneous liquefaction of cobalt-exchanged Adaro and Yilan subbituminous coals. Accordingly, it is clarified that the hydroliquefaction of subbituminous coal, which was exchanged cation hardly, was enhanced by the addition of cobalt-exchanged brown coal.     

Formation and Transformation of δ-Ta2O5 Solid Solution in the System Ta2O5-Al2O3

In the system Ta₂O₃-Al₂O₅ solid solutions of metastable δ-Ta₂O₅ (hexagonal) are formed up to 50 mol% Al₂O₃ from amorphous materials prepared by the simultaneous hydrolysis of tantalum and aluminum alkoxides. The values of the lattice parameters decrease linearly with increasing Al₂O₃, content. The to β-Ta₂O₅ (orthorhombic, low-temperature form) transformation occurs at ∼950°C. The solid solution containing 50 mol% Al₂O₃ transforms at 1040° to 1100°C to orthorhombic TaAlO₄. Orthorhombic TaAlO₄ contains octahedral TaO₆ groups in the structure.