Numerical simulation of critical current performance in Nb3Sn strand subjected to periodic bending deformation

In the ITER Engineering Design Activity (EDA), four NB₃Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 7–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20923     

Contribution of different bitter-sensitive taste cells to feeding inhibition in a caterpillar (Manduca sexta).

Many compounds that taste bitter to humans also inhibit feeding in insects. Caterpillars (e.g., Manduca sexta) detect these compounds with a few bitter-sensitive taste cells. This study examined the role of these taste cells in feeding inhibition. Behavioral studies demonstrated that 3 bitter compounds (caffeine, salicin, and aristolochic acid) all inhibited feeding rapidly in Manduca sena. Electrophysiological studies revealed that each pair of bitter-sensitive taste cell differs in responsiveness to the bitter compounds. Ablation studies indicated that (a) those pairs of bitter-sensitive taste cells that responded vigorously to a particular bitter compound were sufficient to inhibit feeding on diets containing the same compound, but that (b) no pair of bitter-sensitive taste cells was necessary for inhibiting feeding. Thus, the different pairs of bitter-sensitive taste cells appear to make partially redundant contributions to feeding inhibition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

MOSBY: a molecular structure viewer program with portability and extensibility

A molecular structure viewer program, MOSBY has been developed for studies that use atomic coordinates to understand the structures of protein molecules. The program is designed to be portable with a comprehensive user interface by our high-throughput graphics library. In addition, it cooperates with extension modules customized for individual research topics and analysis. For example, an electron density module loads and displays electron density maps derived in X-ray crystallographic analysis superimposed to an atomic model. A molecular dynamics module reads a trajectory file of the results of molecular dynamics calculations and animates the structure. These plug-in modules are devised to function without modification to the MOSBY program. For variations of analysis and calculations with atomic coordinates, the portability and extensibility illustrated by MOSBY play an important rule in scientific computational tools with active software development.     

An investigation of the pH-activity relationships of Cex, a family 10 xylanase from Cellulomonas fimi: xylan inhibition and the influence of nitro-substituted aryl-beta-D-xylobiosides on xylanase activity

The kinetic parameters of Cex, a family 10 xylanase from Cellulomonas fimi, were determined at various pH levels using soluble birchwood xylan (BWX) as a natural polymeric substrate along with three other synthetic aryl-beta-D-xylobioside substrates. Using BWX, a high level of substrate inhibition was observed which increased with decreasing pH. In contrast, typical Michaelis-Menten-type profiles were obtained using the three aryl-beta-D-xylobiosides as substrates. The k(cat) values determined using o-nitrophenyl-beta-D-xylobioside did not change as the pH increased, whereas the k(cat) values obtained with BWX, phenyl-beta-D-xylobioside and p-nitrophenyl-beta-D-xylobioside decreased, suggesting that the presence of an ortho nitro group affects the activity displayed by Cex. These differences were not observed with XynB from Clostridium stercorarium F9, a member of the same family of xylanases as Cex. These results indicate that a careful evaluation is required when employing substituted aryl-beta-D-xylobiosides in the characterization of xylanases.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Address‐While‐Display technique combined with gas‐discharge AND logic for driving AC‐PDPs

A hybrid AWD/AND drive technique has been developed in which an Address‐While‐Display (AWD) scheme is combined with an AND logic characteristic that gas discharges demonstrate. The AWD technique enables AC‐PDPs to be driven at high luminance, while the AND logic reduces the number of scan drivers by an order of magnitude. A detailed analysis of the addressing operation has been made. The hybrid drive utilizes the AND logic in two ways: (1) a combination of two voltage pulses and (2) a combination of a voltage pulse and discharge‐priming particles. It was found that the addressing operation requires the establishment of a discharge between the scan and data electrodes, and also between the scan and display electrodes.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Influence of unparallel grating planes in talbot interferometry with cross gratings of different spatial frequencies in two directions

The effects of an arbitrary small inclination between two cross gratings on the moiré fringes in Talbot interferometry are discussed when the frequencies of the grating differ in two perpendicular directions. We show that the small angles, alpha and beta, by which the beam-splitter cross grating is rotated around the two axes parallel to the two perpendicular line directions of the cross grating, have a greater influence on the moiré fringes with cross gratings than that with one-dimensional gratings. A simple and practical detection method for the angles between the two unparallel grating planes in Talbot interferometry is also proposed. The theoretical analyses are proved by experimental results.