Fiber-optic probes with improved excitation and collection efficiency for deep-UV Raman and resonance Raman spectroscopy

The ability of ultraviolet resonance Raman spectroscopy (UVRRS) to determine structural, environmental, and analytical information concerning low-concentration aqueous biomolecules makes it a powerful bioanalytical and biophysical technique. Unfortunately, its utility has been limited by experimental requirements that preclude in situ or in vivo studies in most cases. We have developed the first high-performance fiber-optic probes suitable for long-term use in pulsed UVRRS applications in the deep- UV (DUV, 205-250 nm). The probes incorporate recently developed improved ultraviolet (IUV) fibers that do not exhibit the rapid solarization and throughput decay that previously hampered the use of optical fibers for delivering pulsed, DUV light. A novel 90 degrees mirrored collection geometry is used to overcome the inner-filtering effects that plague flush-probe geometries. The IUV fibers are characterized with respect to their efficacy at transmitting pulsed, DUV laser light, and prototype probes are used to obtain pulsed UVRRS data of aromatic amino acids, proteins, and hormones at low concentrations with 205-240-nm pulsed excitation. Efficient probe geometries and fabrication methods are presented. The performance of the probes in examining resonance-enhanced Raman signals from absorbing chromophores is investigated, and the optimal excitation wavelength is shown to be significantly red-shifted from the maximum of the resonance Raman enhancement profile. Generally applicable procedures for determining optimal experimental conditions are also introduced.     

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 νm

The use of airborne laser radar (lidar) to measure wind velocities and to detect turbulence in front of an aircraft in real time can significantly increase fuel efficiency, flight safety, and terminal area capacity. We describe the flight-test results for two coherent lidar airborne shear sensor (CLASS) systems and discuss their agreement with our theoretical simulations. The 10.6-μm CO(2) system (CLASS-10) is a flying brassboard; the 2.02-μm Tm:YAG solid-state system (CLASS-2) is configured in a rugged, light-weight, high-performance package. Both lidars have shown a wind measurement accuracy of better than 1 m/s.     

Quantal release at visualized terminals of a crayfish motor axon: intraterminal and regional differences

Synaptic transmission was measured at visualized terminal varicosities of the motor axon providing the sole excitatory innervation of the "opener" muscle in walking legs of crayfish (Procambarus clarkii Girard). Two questions were addressed: 1) How uniform is quantal emission at different locations along terminals innervating a single muscle fiber, and 2) can differences in quantal emission account for the different excitatory postsynaptic potential (EPSP) amplitudes generated by terminals localized in defined regions of the muscle? Extracellular "macropatch" electrodes were placed over individual varicosities, viewed after brief exposure to a fluorescent dye, and synaptic currents were recorded to determine quantal content of transmission. Along terminals supplying a single muscle fiber, nonuniform release was found: Varicosities closer to the point of origin of the terminal branch released more transmitter than those located more distally. Quantal content was higher for varicosities of the muscle's proximal region (where large EPSPs occur) than for varicosities of the central region (where small EPSPs occur). The probability of transmitter release per synapse is estimated to be greater for the proximal varicosities. At low frequencies of stimulation, quantal content per muscle fiber is two to four times larger in the proximal region. Taken in conjunction with a twofold higher mean input resistance for the proximal muscle fibers, the difference in quantal content can account for a four- to eightfold difference in EPSP amplitude. The observed mean EPSP amplitude is at least eight times larger in the proximal region. We discuss factors contributing to differences in EPSP amplitudes.     

Hands-free administration of subjective workload scales: Acceptability in a surgical training environment

Introduction

Subjective workload measures are usually administered in a visual-manual format, either electronically or by paper and pencil. However, vocal responses to spoken queries may sometimes be preferable, for example when experimental manipulations require continuous manual responding or when participants have certain sensory/motor impairments. In the present study, we evaluated the acceptability of the hands-free administration of two subjective workload questionnaires - the NASA Task Load Index (NASA-TLX) and the Multiple Resources Questionnaire (MRQ) - in a surgical training environment where manual responding is often constrained.

Method

Sixty-four undergraduates performed fifteen 90-s trials of laparoscopic training tasks (five replications of 3 tasks - cannulation, ring transfer, and rope manipulation). Half of the participants provided workload ratings using a traditional paper-and-pencil version of the NASA-TLX and MRQ; the remainder used a vocal (hands-free) version of the questionnaires. A follow-up experiment extended the evaluation of the hands-free version to actual medical students in a Minimally Invasive Surgery (MIS) training facility.

Results

The NASA-TLX was scored in 2 ways - (1) the traditional procedure using participant-specific weights to combine its 6 subscales, and (2) a simplified procedure - the NASA Raw Task Load Index (NASA-RTLX) - using the unweighted mean of the subscale scores. Comparison of the scores obtained from the hands-free and written administration conditions yielded coefficients of equivalence of r = 0.85 (NASA-TLX) and r = 0.81 (NASA-RTLX). Equivalence estimates for the individual subscales ranged from r = 0.78 (“mental demand”) to r = 0.31 (“effort”). Both administration formats and scoring methods were equally sensitive to task and repetition effects. For the MRQ, the coefficient of equivalence for the hands-free and written versions was r = 0.96 when tested on undergraduates. However, the sensitivity of the hands-free MRQ to task demands (η_partial² = 0.138) was substantially less than that for the written version (η_partial² = 0.252). This potential shortcoming of the hands-free MRQ did not seem to generalize to medical students who showed robust task effects when using the hands-free MRQ (η_partial² = 0.396). A detailed analysis of the MRQ subscales also revealed differences that may be attributable to a “spillover” effect in which participants’ judgments about the demands of completing the questionnaires contaminated their judgments about the primary surgical training tasks.

Conclusion

Vocal versions of the NASA-TLX are acceptable alternatives to standard written formats when researchers wish to obtain global workload estimates. However, care should be used when interpreting the individual subscales if the object is to make comparisons between studies or conditions that use different administration modalities. For the MRQ, the vocal version was less sensitive to experimental manipulations than its written counterpart; however, when medical students rather than undergraduates used the vocal version, the instrument’s sensitivity increased well beyond that obtained with any other combination of administration modality and instrument in this study. Thus, the vocal version of the MRQ may be an acceptable workload assessment technique for selected populations, and it may even be a suitable substitute for the NASA-TLX.     

Tight analysis of the (1+1)-EA for the single source shortest path problem

We conduct a rigorous analysis of the (1+1) evolutionary algorithm for the single source shortest path problem proposed by Scharnow, Tinnefeld, and Wegener (The analyses of evolutionary algorithms on sorting and shortest paths problems, 2004, Journal of Mathematical Modelling and Algorithms, 3(4):349-366). We prove that with high probability, the optimization time is O(n2 max{?, log(n)}), where ? is the smallest integer such that any vertex can be reached from the source via a shortest path having at most ? edges. This bound is tight. For all values of n and ? we provide a graph with edge weights such that, with high probability, the optimization time is of order Ω(n2 max{?, log(n)}). To obtain such sharp bounds, we develop a new technique that overcomes the coupon collector behavior of previously used arguments. Also, we exhibit a simple Chernoff type inequality for sums of independent geometrically distributed random variables, and one for sequences of random variables that are not independent, but show a desired behavior independent of the outcomes of the previous random variables. We are optimistic that these tools find further applications in the analysis of evolutionary algorithms.     

Dynamic control mechanisms for revenue management with flexible products

Revenue management with flexible products has experienced a growing interest in the academic literature within the last few years. Flexible products allow supply-side substitution between resources and can therefore help to maximize overall revenue as well as capacity utilization in markets with highly uncertain demand. This paper addresses the question of how the mathematical models which have been developed for capacity control with flexible products should be used over time to exploit the substitution opportunities, while keeping practical applicability in mind. Several dynamic control mechanisms are proposed, each of which makes use of the flexibility to a different extent. A comprehensive computational study shows the potential of the different approaches by revealing their strengths and weaknesses.     

Will the experience of playing a violent role in a video game influence people’s judgments of violent crimes?

The present study investigates the impact of the experience of role playing a violent character in a video game on attitudes towards violent crimes and criminals. People who played the violent game were found to be more acceptable of crimes and criminals compared to people who did not play the violent game. More importantly, interaction effects were found such that people were more acceptable of crimes and criminals outside the game if the criminals were matched with the role they played in the game and the criminal actions were similar to the activities they perpetrated during the game. The results indicate that people’s virtual experience through role-playing games can influence their attitudes and judgments of similar real-life crimes, especially if the crimes are similar to what they conducted while playing games. Theoretical and practical implications are discussed.     

Accelerating Boyer–Moore searches on binary texts

The Boyer and Moore (BM) pattern matching algorithm is considered as one of the best, but its performance is reduced on binary data. Yet, searching in binary texts has important applications, such as compressed matching. The paper shows how, by means of some pre-computed tables, one may implement the BM algorithm also for the binary case without referring to bits, and processing only entire blocks such as bytes or words, thereby significantly reducing the number of comparisons. Empirical comparisons show that the new variant performs better than regular binary BM and even than BDM.     

River Networks for Instant Procedural Planets

Realistic terrain models are required in many applications, especially in computer games. Commonly, procedural models are applied to generate the corresponding models and let users experience a wide variety of new environments. Existing algorithms generate landscapes immediately with view‐dependent resolution and without preprocessing. Unfortunately, landscapes generated by such algorithms lack river networks and therefore appear unnatural. Algorithms that integrate realistic river networks are computationally expensive and cannot be used to generate a locally adaptive high resolution landscape during a fly‐through. In this paper, we propose a novel algorithm to generate realistic river networks. Our procedural algorithm creates complete planets and landscapes with realistic river networks within seconds. It starts with a coarse base geometry of a planet without further preprocessing and user intervention. By exploiting current graphics hardware, the proposed algorithm is able to generate adaptively refined landscape geometry during fly‐throughs.