The complete amino acid sequence of a trypsin inhibitor from Bauhinia variegata var. candida seeds

Trypsin inhibitors of two varieties of Bauhinia variegata seeds have been isolated and characterized. Bauhinia variegata candida trypsin inhibitor (BvcTI) and B. variegata lilac trypsin inhibitor (BvlTI) are proteins with Mr of about 20,000 without free sulfhydryl groups. Amino acid analysis shows a high content of aspartic acid, glutamic acid, serine, and glycine, and a low content of histidine, tyrosine, methionine, and lysine in both inhibitors. Isoelectric focusing for both varieties detected three isoforms (pI 4.85, 5.00, and 5.15), which were resolved by HPLC procedure. The trypsin inhibitors show Ki values of 6.9 and 1.2 nM for BvcTI and BvlTI, respectively. The N-terminal sequences of the three trypsin inhibitor isoforms from both varieties of Bauhinia variegata and the complete amino acid sequence of B. variegata var. candida L. trypsin inhibitor isoform 3 (BvcTI-3) are presented. The sequences have been determined by automated Edman degradation of the reduced and carboxymethylated proteins of the peptides resulting from Staphylococcus aureus protease and trypsin digestion. BvcTI-3 is composed of 167 residues and has a calculated molecular mass of 18,529. Homology studies with other trypsin inhibitors show that BvcTI-3 belongs to the Kunitz family. The putative active site encompasses Arg (63)-Ile (64).     

Microstructure and rheology of β-lactoglobulin–galactomannan aqueous mixtures

The effect of the addition of a galactomannan (locust bean gum, LBG, or tara gum, TG) on the microstructure and rheological properties of a globular protein (β-lactoglobulin, β-Lg) solution was studied at pH 7.0, when the protein bears a net negative charge. Confocal laser scanning microscopy was used to explore the microstructure. Steady shear and dynamic oscillatory measurements were performed with a controlled stress rheometer AR2000 (TA Instruments) fitted with a cone-and-plate geometry. Mixtures were prepared with 6.5 wt% β-lactoglobulin concentration and 0.31–0.82 wt% LBG or 0.23–0.71 wt% TG concentration. All mixed systems were two-phase. The microstructure was clearly dependent on the concentration of the galactomannan in the mixture: the systems evolved from a continuous matrix of β-lactoglobulin enriched phase containing some small inclusions of the galactomannan, to a matrix of galactomannan-enriched continuous phase containing aggregates of β-lactoglobulin. Modifications of the flow and viscoelastic properties with respect to the individual components were clearly evidenced for the mixed systems. Phase inversion detected by microscopy could also be detected by rheology as a modification in the flow/viscoelastic behaviour.     

Turbo equalization with cancelation of nonlinear distortion for CP-assisted and zero-padded MC-CDM schemes

In this paper, we consider MC-CDM schemes (MultiCarrier Code Division Multiplexing) where clipping techniques are employed to reduce the envelope fluctuations of the transmitted signals. Both CP-assisted (Cyclic Prefix) and ZP (Zero- Padded) MC-CDM schemes are studied. We develop frequencydomain turbo equalizers combined with an iterative estimation and cancelation of nonlinear distortion effects, with relatively low complexity since they allow FFT-based (Fast Fourier Transform), frequency-domain implementations. Our performance results show that the proposed receivers allow significant performance improvements at low and moderate SNR (Signal-to-Noise Ratio), even when strongly nonlinear transmitters are employed. The receiver for ZP MC-CDM is of special interest for systems where the duration of the channel impulse response is not a small fraction of the duration of the MC-CDM blocks, being suitable to MC-CDM systems with very large blocks (hundreds or even thousands of subcarriers), since they do not require the inversion nor the multiplication of large matrixes.     

Purification of north Brazilian kaolin by selective flocculation

The main kaolin deposits in north Brazil present are contaminated with colored titanous impurities. Conventional beneficiation processes do not completely remove TiO₂. The difficulty in separation is mainly due to the ultra-fine size of the minerals.This work presents a study of an alternative kaolin purification method based on selective adsorption of soluble polymers. In the process, flocs were generated by interaction of anionic polyacrylamide with titanous impurities and were separated from the kaolin suspension through sedimentation.     

Energy Management Fuzzy Logic Supervisory for Electric Vehicle Power Supplies System

This paper introduces an energy management strategy based on fuzzy logic supervisory for road electric vehicle, combining a fuel cell power source and two energy storage devices, i.e., batteries and ultracapacitors. The control strategy is designed to achieve the high-efficiency operation region of the individual power source and to regulate current and voltage at peak and average power demand, without compromising the performance and efficiency of the overall system. A multiple-input power electronic converter makes the interface among generator, energy storage devices, and the voltage dc-link bus. Classical regulators implement the control loops of each input of the converter. The supervisory system coordinates the power flows among the power sources and the load. The paper is mainly focused on the fuzzy logic supervisory for energy management of a specific power electronic converter control algorithm. Nevertheless, the proposed system can be easily adapted to other converters arrangements or to distributed generation applications. Simulation and experimental results on a 3-kW prototype prove that the fuzzy logic is a suitable energy management control strategy.     

Production and characterization of recombinant cyprosin B in Saccharomyces cerevisiae (W303-1A) strain

The Saccharomyces cerevisiae W303-1A strain transformed with a centromeric plasmid containing CYPRO11, which codifies the aspartic protease cyprosin B, was grown in a 3 l bioreactor under aerobic conditions. Expression of cyprosin B is directly dependent on the concentration of galactose used as the inducer and carbon source in 1% yeast extract, 2% bactopeptone, and 4% galactose in culture medium. For 4% of galactose, 209 mg.l(-1) total protein, and 1036 U.ml(-1) recombinant cyprosin B activity were obtained from 6.1 g dcw.l(-1) biomass. The recombinant cyprosin B, purified by two consecutive anion-exchange chromatographies (diethyl amino-ethyl [DEAE]-Sepharose and Q-Sepharose XK-16 columns), shows a specific activity of 62 x 10(3) U.mg(-1), corresponding to a purification degree of 12.5-fold and a recovery yield of 25.6% relative to that in fermentation broth. The proteolytic activity of recombinant cyprosin B is optimal at 42 degrees C and pH 4.5. The recombinant cyprosin B activity is 95% inhibited by pepstatin A, which confirms its aspartic protease nature. The pure recombinant cyprosin B is composed of two subunits, one with 14 and the other with 32 kDa. It exhibits clotting activity, similar to that of the natural enzyme from Cynara cardunculus flowers. The results reported here show that recombinant cyprosin B, the first clotting protease of plant origin produced in a bioreactor, can now be produced in large scale and may constitute a new and efficient alternative to enzymes of animal or fungal origin that are widely used in cheese making.     

CFD predictions for hazardous area classification

This study aimed to describe a Computational Fluid Dynamics(CFD) procedure using the ANSYS CFX software 16.1 and Design of Experiments for the determination of volume and extension of explosive atmospheres due to fugitive emissions of flammable gases.The multidimensional statistical sampling technique Latin Hypercube was used, which defined 100 simulations of random methane gas leak conditions.The CFD model proved to be robust in predicting the extension and volume of the explosive atmosphere for orifice diameters from 0.1 to2.5 mm, pressure from 0.1 MPa to 12 MPa and temperatures from 0 ℃ to 400 ℃.It was found that the calculation domain must be parameterized 8 m in length for each millimeter of the diameter of the source of release to ensure the predictions.In order not to lose precision for very small diameters, the mesh was parameterized with 50 elements along the orifice diameter.It was proved that gravity does not influence the extension and volume of the explosive atmosphere at sonic emissions.The deviation from the ideal gas behavior in the reservoir,achieved by applying the Soave–Redlich–Kwong equation of state, also has not significantly influenced the extension and volume of the explosive atmosphere.The results showed that the size of the explosive atmosphere varies directly with the diameter of the source emission and reservoir pressure, and inversely with the temperature of the reservoir.The diameter of the source is the parameter that has the major effect on the extension of the explosive atmosphere, followed by the pressure and lastly the temperature of the reservoir.     

Pharmacokinetic Parameters of HIV-1 Protease Inhibitors

Since the beginning of the HIV epidemic, research has been carried out to control the virus. Understanding the mechanisms of replication has given access to the various classes of drugs that over time have transformed AIDS into a manageable chronic disease. The class of protease inhibitors (PIs) gained notice in anti-retroviral therapy, once it was found that peptidomimetic molecules act by blocking the active catalytic center of the aspartic protease, which is directly related to HIV maturation. However, mutations in enzymatic internal residues are the biggest issue for these drugs, because a small change in biochemical interaction can generate resistance. Low plasma concentrations of PIs favor viral natural selection; high concentrations can inhibit even partially resistant enzymes. Food-drug/drug-drug interactions can decrease the bioavailability of PIs and are related to many side effects. Therefore, this review summarizes the pharmacokinetic properties of current PIs, the changes when pharmacological boosters are used and also lists the major mutations to help understanding of how long the continuous treatment can ensure a low viral load in patients.     

Flexible and transparent capacitors based on gel-type natural polymers

In this work, we study the capacitive properties of gel-type natural abundant polymers without any dopants, mainly commercial gelatin and agar in deionized water. Here, we propose a facile fabrication of flexible, transparent, and planar electrolytic capacitors using these gel-type and indium tin oxide thin films as electrodes deposited on poly(ethylene terephthalate) substrates. Through cyclic voltammetry and galvanostatic charge–discharge techniques, we found that the devices show a specific capacitance in the order of the millifarads per gram, a specific power of ~10 mW cm⁻², which is sufficient to active low-power devices, and a life cycle with nearly 100% efficiency after 1,000 cycles. We found that we do not need to add dopants that improve the ionic conductivity of the natural polyelectrolytes to obtain capacitances within the millifarads per gram. The flexibility of the capacitors was demonstrated by bending them, after which they exhibited the same electrochemical performance as the unbent devices. The optical transparency of the capacitors was measured by UV–V is spectroscopy showing a high transmittance in the visible region.     

A generalized global adaptive tracking control scheme for robot manipulators with bounded inputs

In this work, a generalized adaptive scheme for the global motion control of robot manipulators with constrained inputs is proposed. It gives rise to various families of bounded adaptive controllers defined through a general class of saturation functions. Compared with adaptive tracking control algorithms previously developed in a bounded input context, the proposed adaptive approach guarantees the motion control objective for any initial condition, avoiding discontinuities throughout the scheme, preventing the inputs to reach their natural saturation bounds, and permitting innovation on the saturating structure through its generalized form, giving a wide range of possibilities for performance improvement. Experimental results corroborate the efficiency of the proposed scheme. Copyright © 2014 John Wiley & Sons, Ltd.