Planar‐Chiral Cyclopentadienyl‐Ruthenium‐Catalyzed Regio‐ and Enantioselective Asymmetric Allylic Alkylation of Silyl Enolates under Unusually Mild Conditions

We report the asymmetric allylic alkylation of allylic chlorides with silyl enolates as a carbon nucleophile using a planar‐chiral cyclopentadienyl‐ruthenium (Cp′Ru) catalyst. The reaction proceeds under unusually mild conditions to give the desired branched products with complete regioselectivity and high enantioselectivity, and reactive functional groups, such as aldehyde, can be tolerated. In this reaction system, Cp′Ru plays an important role in activating both silyl enolate and allylic chloride.

     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

A 0.65-ns, 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM

An ultrahigh-speed 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM with 0.65-ns address-access time, 0.80-ns write-pulse width, and 30.24-μm ² memory cells has been developed using 0.3-μm BiCMOS technology. Two key techniques for achieving ultrahigh speed are an ECL decoder/driver circuit with a BiCMOS inverter and a write-pulse generator with a replica memory cell. These circuit techniques can reduce access time and write-pulse width of the 72-kb RAM macro to 71% and 58% of those of RAM macros with conventional circuits. In order to reduce crosstalk noise for CMOS memory-cell arrays driven at extremely high speeds, a twisted bit-line structure with a normally on MOS equalizer is proposed. These techniques are especially useful for realizing ultrahigh-speed, high-density SRAM's, which have been used as cache and control storages in mainframe computers     

热压/热变形Nd2Fe14B/α-Fe纳米双相永磁体的研究

为了制备各向异性块状Nd2Fe14B／α—Fe纳米双相永磁体，研究了热压／热变形工艺参数与样品微观组织结构、磁性能之间的关系。结果表明，饱和磁化强度Js随模压温度的升高而提高；而剩磁Jr、内禀矫顽力Hcj和最大磁能积(BH)max开始都随模压温度的升高而上升，但超过一定温度后反而降低；同时提高热压压力会使磁性能增加，而热变形温度对磁性能影响很小。热变形后样品垂直于压力方向的磁性能略高于平行于压力方向，呈现出轻微的各向异性。Nd2Fe14B／α—Fe纳米双相永磁材料在热压／热变形后没有产生晶粒的择优长大，在晶体学上仍然是各向同性的。     

Smart Ferrofluid with Quick Gel Transformation in Tumors for MRI‐Guided Local Magnetic Thermochemotherapy

Improved techniques for local administration of anticancer drugs are needed to reduce the side effects of chemotherapy owing to leakage of anticancer drugs from tumors and to enhance therapeutic efficacy. This study presents the development of smart ferrofluid that transforms immediately into a gel in tumors and generates heat in response to an alternating magnetic field (AMF), simultaneously releasing the anticancer drug. The smart ferrofluid, which is synthesized using less toxic magnetic materials (Fe₃O₄ nanoparticles), natural polysaccharides (alginate), and amino acids (cysteine), can also act as a contrast agent for magnetic resonance imaging (MRI). The ferrofluid also incorporates an anticancer drug (i.e., doxorubicin, DOX) via hydrogen bonds. AMF causes heating of gels prepared from the DOX‐containing ferrofluid, resulting in gel shrinkage and DOX release. In vivo experiments demonstrated that the ferrofluid transforms into a gel in the tumor, with the gel remaining in the tumor. Furthermore, magnetic thermochemotherapy using this ferrofluid inhibited tumor growth, while magnetic hyperthermia alone had only a marginal effect. Thus, the combination of magnetic hyperthermia and chemotherapy may be important for suppressing tumor growth. In summary, the ferrofluid presented here has the potential to facilitate MRI‐guided magnetic thermochemotherapy through a combination of endoscopic technologies in the future.     

Surface modifications of aligned carbon nanotube thin films by Argon‐ion sputtering

To use carbon nanotubes (CNTs) as anode material for the solid‐state thin‐film Li‐ion rechargeable battery, the tubes are preferred to be aligned perpendicular to a substrate and the CNT thin film to have a smooth surface. Using an Ar‐ion sputtering technique, we carried out the surface modifications of the CNT thin film prepared by the SiC surface decomposition method. In order to evaluate the surface modification, the surface and cross section of the modified CNT film were investigated by field‐emission scanning electron microscopy and atomic force microscopy. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors

Cu₂ZnSnS₄ (CZTS) thin films were prepared by sulfurizing precursors deposited by electroplating. The precursors (Cu/Sn/Zn stacked layers) were deposited by electroplating sequentially onto Mo-coated glass substrates. Aqueous solutions containing copper sulfate for Cu plating, tin sulfate for Sn plating and zinc sulfate for Zn plating were used as the electrolytes. The precursors were sulfurized by annealing with sulfur at temperatures of 300, 400, 500 and 600 °C in an N₂ gas atmosphere. The X-ray diffraction peaks attributable to CZTS were detected in thin films sulfurized at temperatures above 400 °C. A photovoltaic cell using a CZTS thin film produced by sulfurizing an electroplated Sn-rich precursor at 600 °C exhibited an open-circuit voltage of 262 mV, a short-circuit current of 9.85 mA/cm² and an efficiency of 0.98%.     

Power reduction techniques for a 1-Mb ECL-CMOS SRAM with an accesstime of 550 ps and an operating frequency of 900 MHz

This paper describes power reduction circuit techniques in an ultra-high-speed emitter-coupled logic (ECL)-CMOS SRAM. Introduction of a 0.25-μm MOS transistor allows a Y decoder and a bit-line driver to be composed of CMOS circuits, resulting in a power reduction of 34%. Moreover, a variable-impedance load has been proposed to reduce cycle time. A 1-Mb ECL-CMOS SRAM was developed by using these circuit techniques and 0.2-μm BiCMOS technology. The fabricated SRAM has an ultrafast access time of 550 ps and a high operating frequency of 900 MHz with a power dissipation of 43 W     

Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering

In this study, we propose a new process to fabricate electrically semi-conductive alumina by the combination of gelcasting and reduction sintering. The process is similar to the conventional gelcasting method except for varying amounts of methacrylamide monomer dosages at 2.83, 5.50, and 8.04 wt% relative to the mass of the slurry. Correspondingly, the rheological evaluation of aqueous slurry was conducted. The resulting fluidity exhibited that monomer dosage until 8.04 wt% yielded slurry viscosity of 1628 MPA·s at shear rate of 20 s⁻¹, which was feasible for gelcasting without noticeable casting defects. The freshly gelled bodies were demolded, carefully dried, and then sintered at different schedules in nitrogen atmosphere. The reduction-sintered samples were re-sintered in air for comparative evaluation of physical property. The sintered alumina body was characterized by electrical resistance, X-ray diffraction, and scanning electron microscopy. The results showed that monomer additions and sintering schedule significantly affect in lowering electrical resistivity. The obtained lowest value was 3.6 × 10⁶ Ω-cm with 8.04 wt% monomer dosage and sintering at 1550°C with 2 h holding time. The resulting material is classified as semi-conductive, which is potential for electrostatic shielding applications. The effect of physical property and microstructure on electrical conductivity and the corresponding reaction mechanism were discussed in details.