High Throughput Screening of Low Temperature SCR and SCD De-NOx Catalysts in Scanning Mass Spectrometer

High-throughput synthesis and screening methods have been developed for the discovery of highly active lead compounds for the selective catalytic reduction as well as direct decomposition of NO in the temperature range 200–300 °C. The discovery libraries for primary screening consisted of 16 × 16 catalyst arrays on 4in. square quartz wafers. Catalysts were prepared by robotic liquid dispensing techniques and screened for catalytic activity in Symyx' scanning mass spectrometer. The scanning mass spectrometer is a fast serial screening tool that uses flat wafer catalyst surfaces, local laser heating, a scanning/sniffing nozzle and a quadrupolar mass spectrometer to compare relative catalytic activities. The feed consisted of NO/NH₃ mixtures with optional O₂ cofeed and Kr as the internal standard in Ar carrier gas. QMS detection allowed for tracking of H₂O, N₂, NO, O₂, N₂O and Kr. Screening protocols for catalytic materials encompassed metal precursors and carriers for supported vanadia systems, extensive doping of V₂O₅/TiO₂, and broad screening of mixed redox metal oxides and supported base and noble metal systems. More than 500 samples could be screened in a single day. Active hits (high NO consumption accompanied by corresponding N₂ production) identified in discovery libraries were re-synthesized as focus libraries for lead confirmation and further optimization. These libraries used shallower compositional gradients, for example 56 points (compositions) per ternary, with four 56-point ternaries per 4in. wafer. Broad screening ternaries were generally 8 or 15 points. The focus libraries more clearly reveal the trends and provide guidelines for secondary screening and scale-up. High conversions were achieved in scanning mass spectrometer so the scalability risk is small for the short contact time reactions.     

Stress Superposition in High-Strength Glass

The introduction of surface compression via alkali-ion exchange is frequently used to strengthen alkali-containing glass. However, previous investigators found that when starting with high-strength glass, the strength measured after exchange was significantly less than the sum of the residual compression and the starting fracture strength. Results are presented which suggest that the source of this discrepancy is surface damage produced during the heat treatment accompanying the ion-exchange process. Further, when the surface damage was removed by shallow hydrofluoric acid etching, the resulting fracture strength did approximately equal the sum of the residual stress and the high starting strength.     

Outdoor attractancy of males ofMatsucoccus josephi (Homoptera: Matsucoccidae) andElatophilus hebraicus (Hemiptera: Anthocoridae) to synthetic female sex pheromone ofMatsucoccus josephi

The active component of the sex pheromone ofMatsucoccus josephi is (2E,6E,8E)-5,7-dimethyl-2,6,8-decatrien-4-one; the chemical is also a powerful kairomone of adult males and females of the bugElatophilus hebraicus the principal predator ofM. josephi. The presence of theZ isomer (2E,6Z,8E)-5,7-dimethyl-2,6,8-decatrien-4-one does not interfere with the attractancy of the activeE component forM. josephi males or the bug. Our results show a clear dose-response between trap catch ofM. josephi males andE. hebraicus. Conversely, increasing amounts of theZ isomer in the mixture did not affect the attraction of the scale insect males or the bug. The catch ofM. josephi males did not differ significantly among traps of different color, and was significantly higher with traps attached to the tree trunk than those suspended between trees. Comparison of the catch ofM. josephi among the three forests and between pine species suggests that the level of infestation ofPinus halepepsis andPinus brutia ssp.brutia is similar, despite the fact that the latter pine is resistant to the scale insect. Both sexes ofE. hebraicus were trapped in much lower numbers at the more infested sites. This may be related to interference with the activity ofE. hebraicus due to deterioration and drying of parts of the tree crowns and heavy colonization by generalist predators in injured trees.     

Pyrolysis of model compounds on spent oil shales, minerals and charcoal: Implications for shale oil composition

Aliphatic compounds (alkanes, alkenes, alkanoic acids, ketones, alcohols and amines) were passed through beds of spent oil shales (Condor brown, Condor carbonaceous, Julia Creek), minerals (quartz, calcite, K-feldspar, pyrite, kaolinite) and charcoal at temperatures of 300–600 °C and the products were analysed by g.c.m.s. All the materials catalysed isomerization, aromatization and cracking to varying degrees: non-clay minerals < kaolinite ≈ spent oil shales < charcoal. Products included branched alkanes, isomeric alkenes, nitriles, ketones and alkyl-substituted benzenes, naphthalenes, pyridines, phenols, thiophenes and pyrroles. These compounds occur in shale oils and may be derived from secondary reactions of aliphatic products arising from kerogen cracking.     

Über das Spreiten von Lipiden auf der Haut

On the Spreading of Lipids on the Skin The spontaneous spreading of liquid lipids on human skin is an important property for the use value of such products in cosmetic and pharmaceutical preparations. A comparative evaluation procedure based on an impression method is described, by means of which it is possible to determine the spreading rates in a reproducible manner. The standardized spreading values of a number of lipids are discussed in comparison with their chemical structure and physico-chemical data such as viscosity and surface tension. None of these data series correlates entirely with the spreading rates of all the lipids tested. However, it is possible to assess relative spreading rates within similarly structured groups of compounds.     

Curupira tefeensis II: Occurrence of Acetylenic Fatty Acids

Four acetylenic fatty acids [11-octadecen-9-ynoic acid (E) (ximenynic acid), 11-octadecen-9-ynoic acid (Z), 9,11-octadecadiynoic acid and 13-octadecen-9,11-diynoic acid (E) (exocarpic acid)] were found in the seed oil of Curupira tefeensis (Olacaceae) as minor compounds. The mass spectra of the methyl esters (EI and CI mode), picolinyl esters and 4,4-dimethyloxazoline derivatives of these acids are discussed in detail. Furthermore the NMR data of 9,11-octadecadiynoic acid and 13-octadecen-9,11-diynoic acid are presented.     

The Mass Spectra of the Picolinyl Ester Derivatives of Malvalic and Sterculic Acid

The mass spectra of the picolinyl derivatives of two natural occurring cyclopropenoid fatty acids (malvalic and sterculic acid) showed, besides the typical peaks for picolinyl derivatives, a characteristic gap of 66 amu between the two allylic positions of the ring system. This phenomenon could be used for the determination of the ring position of this type of fatty acids.     

In Situ EXAFS Study on the Chemical State of Arsenic Deposited on a NiMoP/Al2O3 Hydrotreating Catalyst

The chemical state of arsenic deposited on a NiMoP/Al₂O₃ hydrotreating catalyst exposed to ppb levels of arsenic over several years in a refinery reactor has been studied by in situ EXAFS. In the as-received As-NiMoP catalyst, arsenic is exclusively coordinated to oxygen atoms. Upon sulfiding the sample in 2%H₂S/2%H₂/96%He, the As atoms become surrounded by approximately two sulfur atoms. No evidence was found for Ni–As bond formation. A possible model for the As local environment is suggested on the basis of combined EXAFS results, STM data and FEFF8.0 simulations (program for ab initio calculations on multiple scattering XAFS and XANES). The FEFF8.0 simulations of the proposed model are in accord with the experimental data measured at the As K edge. In this model, an As atom is located at the edge of a hexagonally truncated Ni-MoS₂ slab and is blocking the active NiMoS site.     

Reaction of pyritic sulphur in coal with lime and calcined dolomite during the coking process

Various reactions occur between pyrite (FeS₂) in coal and CaO to form CaS when a finely pulverized intimate mixture of coal and CaO is coked at 900 °C in an inert atmosphere. The effectiveness of lime and calcined dolomite (CaO.MgO) in promoting this reaction has been evaluated; calcined dolomite is somewhat more effective than lime over coal/ oxide weight ratios from 2.8 to 14. The degree of conversion of pyrite to calcium sulphide at a coal/calcined dolomite weight ratio of 7 has been determined as a function of time at 900 °C; coking time in excess of 2.5 h does not have a significant effect. It has been shown that the total sulphur lost on coking coal/lime mixtures decreases and the percentage of FeS, originating from the dissociation of pyrite, converted to CaS increases as the amount of lime added increases. But although the total sulphur content of coke produced in the presence of CaO is then higher than when the coal is coked without lime, the pyritic sulphur has been converted to CaS which is more amenable to chemical conversion to H₂S. A method is outlined for determining CaS in the coked mixture in the presence of FeS.