A calibration method for the energy-integrating function in photovoltaic system monitoring

Solar radiation has an irregularly varying factor due to a basic day and night cycle and climatic conditions. For such conditions a data sampling interval is important to ensure the accuracy of energy monitoring in a photovoltaic system. While treating a system monitoring equipment as a black box. the author has developed the method of calibrating an energy-integrating function. At first for various input waveforms, the relationship between sampling intervals and quasi-integration outputs have been examined by trapezoidal rule. In the numerical simulation the phases of the sampling clock also are considered Then it is concluded that a sampling interval can be inspected through outside observation only by using a rectangular single pulse. By applying the pulse to the energy-integrating process, two kinds of integrated outputs can be obtained for different sampling phases. The calculated difference between both outputs can uniquely give the sampling interval being inspected. Conditions to ensure measuring accuracy are discussed and the validity of this method has been demonstrated experimentally. Practical calibrating procedures also are proposed for the integrating function of PV system monitoring.     

Spherical Yttrium Aluminum Garnet Embedded in a Glass Matrix

Containerless processing was used to investigate the glass-forming behavior of Al₂O₃–Y₂O₃ glass. The amorphous bulk samples were obtained at compositions with 25–37.5 mol% yttria when the melt was cooled at a cooling rate of ∼250 K/s. Although small spherical particles (∼10 μm) with the same composition of the matrix were detected in the amorphous samples with 32.5–37.5 mol% yttria, the microfocus X-ray diffraction result indicated that the small spherical particles were crystalline Y₃Al₅O₁₂ garnet (YAG), rather than being amorphous. This observation suggested that small YAG particles could not grow larger after their nucleation, because of the high viscosity at high undercooling and the high cooling rate, which would graze the nose of the continuous cooling temperature diagram of YAG.     

SEPARATION AND ENRICHMENT OF WEAK ORGANIC ACIDS OR BASES BY IMMOBILIZED LIQUID MEMBRANES

A new and effective liquid membrane process to achieve both separation and enrichment simultaneously of weak organic acids or bases was developed. The process utilizes effectively the difference in the apparent partition coefficient of the constituent species between the aqueous and organic phases, and uses the change of the apparent partition coefficients with the hydrogen ion concentration of the aqueous phase. For such a fundamental model apparatus as a diaphragm diffusion cell being operated batch wise, the effects of pK value of solutes, permeability of solutes through the membrane, volume ratio of liquids in two aqueous phases, and pH value of aqueous phase on enrichment factor and selectivity for the solute to be concentrated were discussed analytically. Separation and enrichment were demonstrated using aqueous mixed solutions of fumaric acid and L-malic acid. The results were in good agreement with the theoretical predictions.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.     

Surface-Chemical Criteria for Optimum Adhesion

According to Bikerman, who attributes failure in adhints to a weak boundary layer, it is almost impossible and meaningless to correlate adhesive strength to surface-chemical properties of adhints. Though his assertion seems to be confirmed by the recent studies of Schonhorn and his coworkers on the methods of CASING and TCR, not a few results have yet been accumulated, which show a close relation between them. In this paper surface-chemical criteria for the optimum adhesion are investigated and the minimum interfacial tension or the maximum wetting pressure is deduced from the published data and our own as a first approximation. It is emphasized that, when critical surface tension γ_c would be used as a measure of surface-chemical properties of solid, its variability according to liquid series (nonpolar, polar and hydrogen bonding liquids) should be carefully taken into consideration. The importance is shown for polyethylene and its fluorine substituted polymers, using newly measured contact angle data and Zisman's data. Results of Levine et al. and Schonhorn et al. on adhesive shear strength with epoxy adhesives are replotted against available values of γ_c obtained by the use of hydrogen bonding liquid (γ_c^c), which are thought to reflect wetting behaviors of epoxy adhesives quite well. Each curve shows a maximum around γ_c^c = 40 dyne/cm with few points falling off the curves.     

Electro-rheological effect and dynamic rheological properties of a blend composed of two liquid crystalline materials with different molecular weight

Electro-rheological (ER) effect of a blend composed of two liquid crystalline materials with different molecular weights is described in this article. The results indicated that ER effect of the blend was observed at the temperature range where each neat sample did not show ER effect. Furthermore, both storage modulus (G′) and loss modulus (G″) decreased drastically at the temperature range for the blend in dynamic viscoelastic measurements. We show that steady ER effect could be obtained by using a blend made up of two liquid crystalline components, whereas remarkable increment in shear stress was not observed for each component under applied electric field.     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Porous poly(L‐lactic acid)/poly(ethylene glycol) blend films

Poly(L ‐lactic acid) (PLLA: M_w = 19.4 × 10⁴)/poly(ethylene glycol) (PEG: M_w = 400) blend films were formed by use of a solvent‐cast technique. The properties and structures of these blend films were investigated. The Young's modulus of the PLLA decreased from 1220 to 417 MPa with the addition of PEG 5 wt %, but the elongation at break increased from 19 to 126%. The melting point of PLLA linearly decreased with increases in the PEG content (i.e., pure PLLA: 172.5°C, PLLA/PEG = 60/40 wt %: 159.6°C). The PEG 20 wt % blend film had a porous structure. The pore diameter was 3–5 μm. The alkali hydrolysis rate of this blend film was accelerated due to its porous structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 965–970, 2004     

Nonlinear effects on spin waves in3He-4He dilute solutions

Spin dynamics of³He-⁴He dilute solution have been studied in the collisionless regime by NMR methods. In cw NMR experiments, we observed spin waves in a magnetic field gradient. The frequency difference between the first mode and the others obeyed a two-thirds power law in the strength of the field gradient. By using a pulsed NMR method, nonlinear spin dynamics were studied. We observed the large amplitude spin waves after an rf pulse. The frequency of each spin-wave mode depended on the tipping angle. By using the parameter determined in the present experiment, the numerical calculated results based on Leggett-Rice theory are in good agreement with the results of the pulsed NMR experiments.     

Microstructure Control of Thermally Sprayed Co-Based Self-Fluxing Alloy Coatings by Diffusion Treatment

This article describes microstructure control aimed for wear-resistance improvement of Co-based (Co-Cr-W-B-Si) self-fluxing alloy coating by diffusion treatment. The diffusion treatments of thermally sprayed Co-based self-fluxing alloy coating on steel substrate were carried out at 1370-1450 K for 600-6000 s under an Ar gas atmosphere. Microstructural variations of the coating and the interface between the substrate and the coating were investigated in detail. A proper diffusion treatment precipitates two kinds of fine compounds in Co-based matrix. X-ray diffractometer (XRD) and electron probe microanalyzer (EPMA) analysis revealed these precipitates to be a chromium boride dissolving cobalt and a tungsten boride containing cobalt and chromium. The size of each precipitate became larger with increasing treatment temperature and time. A coating with the proper size borides showed a superior wear-resistance. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.