Occurrence of introns in the 16S rRNA genes of members of the genus Thermoproteus

Cervical smears (n = 150) from five departments showing high-grade dyskaryosis were examined by three cytologists. All the smears came from patients with biopsy-proven CIN III. One hundred had been correctly reported (true positives) but 50 had originally been reported as negative and had been found to be positive only on review (false negatives). There were significant differences between the two sets in the characteristics of the dyskaryotic cell population. The false-negative smears tended to have fewer than 200 dyskaryotic cells. The nuclei of the dyskaryotic cells tended to have fine rather than coarse nuclear chromatin. A smear with fewer than 50 dyskaryotic cells is 26 times more likely to be reported as negative than one with more than 200 dyskaryotic cells. The results suggest that there is a type of severely dyskaryotic smear that is inherently likely to be missed on routine screening.     

Familial occurrence of congenital bile duct cysts

Congenital bile duct cysts are now a well-documented anomaly of the biliary tree, and have become more common in Japan. Familial occurrence of congenital bile duct cysts, however, is extremely rare, with only six reported cases in the literature. We report a familial pattern of congenital bile duct cysts in a mother and her daughter. A 33-year-old female was admitted for evaluation of right upper quadrant abdominal pain and fever 6 days after an uneventful delivery of her second child. A computed tomography (CT) and ultrasound scan (US) revealed an obstructed biliary tract. Percutaneous transhepatic biliary drainage was then performed, and a cholangiogram revealed a Scholtz type B choledochocele without an anomalous connection of the pancreaticobiliary ducts. Endoscopic US demonstrated that the choledochocele was associated with a stone in the cyst. A pylorus-preserving pancreatoduodenal resection was performed, and a histological study revealed that the choledochocele was lined by biliary mucosa without evidence of malignancy. The newborn infant had an abdominal tumour. An US and CT revealed a congenital bile duct cyst. An operation was performed and the intraoperative cholangiogram showed an Alonso-Lej type I congenital bile duct cyst with an anomalous connection of the pancreaticobiliary ducts. Whether congenital bile duct cysts are hereditary remains to be elucidated.     

Radiation-induced polymerization of ethylene in a pilot plant. I. Bulk process

Radiation-induced bulk polymerization of ethylene was carried out with use of a pilot plant with a 10 liter reactor at pressures of 225–400 kg/cm², temperatures of 30–95°C, ethylene feed rates of 5–28 kg/hr, and dose rate of 3.8 × 10⁵ rad/hr. Characteristics of the process are mild polymerization conditions and capability of producing medium density polyethylene in powder form. The spacetime yield and molecular weight of polymer were in the range of 3.5 to 13.1 g/liter hr and 2.2 × 10⁴ to 14 × 10⁴, respectively. The space-time yield increased with mean residence time and 2.4 powders of pressure, and decreased with temperature. Molecular weight changed similarly with the reaction conditions. These results were consistent with those of the bench plant experiment and the scale effect was small. Polymer deposit to the reactor wall limited a period of continuous operation of the plant. The amount of deposited polymer was increased with the square of reaction time. The rate of polymer deposit was proportional to polymer concentration and to the cube of pressure. The polymer deposit cannot be solved in the bulk process.     

Triterpene alcohols and sterols of Spanish olive oil

Nine Spanish olive oils, including three each of virgin (pressed oil), refined virgin, and B-residue (solvent-extracted pomace oil) oils from different commercial sources, have been analyzed for their unsaponifiable matter (USM). Four sterolic fractions separated from the oils have been analyzed by preparative thin-layer chromatography (TLC); these fractions are triterpene alcohols, 4-methylsterols, sterols and triterpene dialcohols. The compositions of the four sterolic fractions were determined as their acetates by gas-liquid chromatography (GLC) on an OV-17 glass capillary column. Identification of each component was carried out by argentation TLC, GLC and combined gas chromatography-mass spectrometry (GC-MS); 44 components were identified, of which four: 24-methylene-31-nor-9(11)-lanostenol, 24-methyl-31-nor-E-23-dehydrocycloartanol, 24-ethyl-E-23-dehydrolophenol and 5,E-23-stigmastadienol, were considered to be new sterols from natural sources. Several characteristics, including the content of triteterpene dialcohols in the USM and that of C-24(28) unsaturated sterols in each of the four sterolic fractions, which can be used to distinguish between virgin and B-residue olive oils, were observed.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Charged ultrafiltration membrane for permeation of proteins

Polyacrylonitrile-g-poly(N,N-dimethylaminoethyl methacrylate) was synthesized photochemically and quaternized. The positively charged membranes made from the quaternized graftcopolymer showed high ultrafiltration rate for water by adding poly(vinyl alcohol) to casting solution and washing it out after the casting. In buffered saline solution, the permeability of the membranes was very small at pH below isoelectric point of albumin but increased markedly at higher pH. On the other hand, the permeability for γ-globulin was very small and did not show any pH dependence.     

Creep rupture properties of homopolymer,copolymer, and terpolymer based on poly(oxymethylene)

Polyacetal copolymers were prepared by cationic ring‐opening copolymerizations of 1,3,5‐trioxane (TOX) with 1,3‐dioxolane (DOX), and polyacetal terpolymers were prepared by terpolymerizations of TOX, DOX, and 2‐ethylhexyl glycidyl ether (EHGE). Polyacetal polymers with three different structures such as polyacetal homopolymers, polyacetal copolymers, and polyacetal terpolymers were compared in the mechanical properties and the creep characteristics, and discussed from the view point of the polymer structure. The polyacetal copolymers and the polyacetal terpolymers were determined by ¹H‐MNR measurement. About 80 mol % of DOX and EHGE amounts in feed were incorporated randomly into the each polymer. From the plots of the degree of crystallinity (X_c) versus the tensile strength, the tensile strength and crystallintiy of the polyacetal homopoymers are higher than those of the polyacetal copolymers and the polyacetal terpolymers. However, the tensile strength does not decrease linearly with a decrease in the crystallinity among the polyacetal polymers with three different structures, the polyacetal homopolymer, the polyacetal copolymers, and the polyacetal terpolymers. Creep rupture was characterized by the activation volume, υ_c, value in Zhurkov's equation, which can be estimated from the slope in the plots of load versus log (rupture time) at 80°C. The polyacetal polymers with higher molecular weight have larger values of the activation volume than those with lower molecular weight. When the activation volume values are compared among the polyacetal polymers with the same molecular weights, they increase in the following order: the polyacetal homopolymers < the polyacetal copolymers < polyacetal terpolymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Hydrolyzable‐emulsifier‐containing polymer latices as dispersants and binders for waterborne carbon black paint

Poly(styrene‐co‐butyl methacrylate) and poly(styrene‐co‐butyl acrylate) latices were prepared by emulsion polymerization with alkali‐hydrolyzable and nonhydrolyzable cationic emulsifiers and were used as a dispersant and binder for waterborne carbon black (CB) paint. CB was dispersed in the latex solutions and then coated on filter paper pretreated with dilute aqueous Na₂CO₃ under mild conditions. The styrene (St)‐rich rigid copolymer latices easily dispersed the CB but fixed a little amount of the pigment on the paper surface. In contrast, the methacrylate‐ and acrylate‐rich soft latices tended to increase the adhesibility on it. We also demonstrated that the hydrolyzable‐emulsifier‐containing latices always had a higher adhesibility than the nonhydrolyzable‐emulsifier‐containing ones. Thus, the hydrolyzable‐emulsifier‐containing latices with an appropriate St content had the highest paintability, rapid adhesion, quick drying, reduced fading, superior fastness, and so on. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3869–3873, 2013