Power generation of the touching Cu/Bi-Te/Cu composites under the periodically alternating temperature gradients

The thermo-emf ΔV of the touching p- and n-type Cu/Bi-Te/Cu composites with different thicknesses of t _Bi-Te and t _Cu was measured as a function of time by alternating the temperature difference ΔT at periods of T = 20, 60, 120, 240 and ∞ sec, where t _Bi-Te was varied from 0.1 to 2.0 mm and t _Cu from 0 to 4.0 mm. As a result, ΔV changes significantly with t _Bi-Te, t _Cu and T. The effective thermo-emf ΔV _eff increases significantly with an increase of 1/T and exhibited a local maximum at 1/T = 1/240 s⁻¹. The resultant | α | and the effective temperature difference ΔT _eff were increased significantly by optimizing t _Bi-Te and t _Cu at 1/T = 1/240 s⁻¹. The power generation ΔW _eff (= ΔV _eff²/4R _calc) estimated using the measured ΔV _eff and calculated R _calc also exhibited a local maximum at 1/240 s⁻¹ for an optimum combination of t _Bi-Te = 0.1 mm and t _Cu = 2.0 mm, so that the maxima ΔW _eff at 1/T = 1/240 s⁻¹ for the p- and n-type composites were 2.28 and 2.92 times higher than those obtained at 1/T = 0 s⁻¹. This significant increase in ΔW _eff is owing to both the increase in ΔT _eff and the increase in ZT due to the increase in |α|. The power generation was thus found to be enhanced significantly by imposing the alternating temperature gradients on touching Cu/Bi-Te/Cu composites.     

Thermal and optical properties of epoxy/zirconia hybrid materials synthesized via in situ polymerization

Epoxy/zirconia hybrid materials were synthesized from a bisphenol-A type epoxy resin, zirconium-tetra-n-propoxide and acetic acid via in situ polymerization. Acetic acid was used to control the hydrolysis and condensation reaction of the zirconium-tetra-n-propoxide. As a result, the zirconia produced by the in situ polymerization was uniformly dispersed into the epoxy matrix on a nano scale or less, and the hybrid materials exhibited an excellent optical transparency. With the increasing zirconia contents, the storage modulus in the rubbery region increased and the peak area of tanδ in the glass transition temperature region decreased. These results indicate that their heat resistance of the hybrid materials could be improved by hybridization with zirconia. Furthermore, the refractive indices of the hybrid materials were significantly improved with the increasing zirconia contents.     

Organic LED full-color passive-matrix display

Abstract— A full-color 5.2-inch 1/4-VGA passive-matrix organic LED display has been developed, adopting selective deposition for the different emitting materials. The display features 320 (×3) × 240 pixels with an equivalent pixel size of 0.33 × 0.33 mm, white peak luminance of over 150 cd/m², and power consumption of 6 W.     

AN EXPERIMENTAL AND STATISTICAL INVESTIGATION OF SURFACE FATIGUE CRACK INITIATION AND GROWTH

Surface fatigue crack studies were carried out and statistically analysed from rotating bend fatigue tests in the high cycle region for three metals, copper, stainless steel and mild steel with four ferrite grain sizes. Quantitative observations of the initiation and growth behavior, including coalescence of closely spaced cracks, are discussed and a limiting condition for coalescence is proposed. Statistical properties of initiation, propagation and propagation rate of surface cracks are examined and the effect of different metals and grain sizes is discussed.     

Stress disturbance due to broken fibres in metal matrix composites with non-uniform fibre spacing

Premature fracture of weaker fibres causes stress disturbances in composites. These disturbances are affected by non-uniformity of fibre spacing. In order to evaluate quantitatively how the disturbances in metal matrix composites are affected by the extent of non-uniformity of fibre spacing, a method of calculation is presented on the basis of two-dimensional shear lag analysis. Static tensile stress concentrations in the intact fibres to broken fibres, tensile stress distribution along the fibre axis in the broken and intact fibres and shear stresses between broken and intact fibres were calculated by the method presented, using some examples. It is shown quantitatively that the spacing between broken and intact fibres and that between intact and next fibres has a significant influence on tensile stress concentrations in intact fibres and also on the shear stresses between broken and intact fibres: the narrower the former spacing and the wider the latter spacing, the higher become both tensile and shear stress concentrations. This tendency is enhanced when the number of broken fibres is large and when the strain hardening of the matrix is high.     

Studies on anti-inflammatory agents. V. Synthesis and pharmacological properties of 3-(difluoromethyl)-1-(4-methoxyphenyl)-5- [4-(methylsulfinyl)phenyl]pyrazole and related compounds

A series of novel 1,5-diphenylpyrazole derivatives bearing hydrophilic substituents was prepared. The anti-inflammatory and analgesic activities of these compounds were evaluated by using the adjuvant arthritis and Randall-Selitto assays in rats, and the structure-activity relationships were studied. The optimal compound was 3-(difluoromethyl)-1-(4-methoxyphenyl)-5-[4-(methylsulfinyl)phenyl]pyraz ole (10) with oral ED50 values of 0.31 and 2.6 mg/kg on adjuvant-induced arthritis and carrageenin-induced foot edema, respectively. Compound 10 showed analgesic activities not only toward inflamed paw but also toward normal paw (ED30 = 0.55 and 1.8 mg/kg, respectively) in the Randall-Selitto assay, and moreover, 10 was effective in the tail-pinch assay (ED50 = 21 mg/kg) similarly to morphine. The asymmetric synthesis and pharmacological properties of the enantiomers of 10 are also reported.     

The effects of di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) administration on human intestinal microbiota

Di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) was shown to enhance Ca absorption in rat and human intestine. The effects of DFA III administration (9 g per day for 4 weeks that corresponded to 3-fold the optimal dosage of DFA III) on human intestinal microbiota were studied using denaturing gradient gel electrophoresis (DGGE). The major groups of human intestinal microbiota reported previously: the Bacteroides, the Clostridium coccoides group (Clostridium cluster XIVa), the Clostridium leptum group (Clostridium cluster IV), and the Bifidobacterium group were detected. The similarity of 30 DGGE profiles based on the V3 region (before and after administration to the 15 subjects) of the 16S rDNA were calculated using Pearson's correlation based on numbers, positions and intensity of bands, and then a dendrogram of DGGE profiles was constructed by the unweighted pair group method using arithmetic average (UPGMA) clustering method. By these analyses, no difference in DGGE profiles after DFA III administration was observed in healthy subjects, while two subjects with chronic constipation showed different profiles, namely on numbers, positions and the intensity of some bands. Their stools were softer and stool frequencies increased and they obtained relief from constipation.     

Thermal conduction theoretical analysis of temperature distribution during multiple-electrode submerged arc welding

In recent years, in order to reduce the costs of transportation and construction of pipelines, which are often constructed using multiple-electrode submerged arc welding (SAW), higher joint performance is required. Therefore, there has arisen the need to understand theoretically and control appropriately metallurgical and mechanical characteristics in heat-affected zone (HAZ), which has a significant influence on the strength and toughness of welded joints. Commonly, metallurgical phenomena in HAZ are evaluated based on the highest temperature and the cooling rate. Therefore, in order to control metallurgical and mechanical characteristics in HAZ by means of the welding conditions, evaluating the temperature distribution and the temperature history near the melted zone is essential. However, a detailed investigation of the temperature distribution for multiple-electrode SAW has not yet been carried out enough. In this study, in order to investigate the temperature distribution and histories during multiple-electrode SAW, the experimental results are compared with the theoretical results. In the theoretical analysis, the temperature rise equation in multiple heat sources welding is developed using the method of summation. Furthermore, on temperature distribution during welding, the effects of multiple heat sources, such as the number of heat sources and the distance between each electrodes, are considered quantitatively through the thermal conduction theoretical analysis. As the result, the distance between lead heat source and final heat source primally influences the area with the difference between a single heat source welding and multiple heat sources welding. Based on the results, it is expected to control temperature distribution near melted zone by more appropriate heat input characteristics, which is depended on heat source arrangement.     

A real-time PCR method targeting a gene sequence encoding 16S rRNA processing protein,rimM, for detection and enumeration of Streptococcus thermophilus in dairy products

A real-time PCR method targeting a gene sequence encoding 16S rRNA processing protein, rimM, for specific detection of Streptococcus thermophilus was developed. The designed real-time PCR primers and probe were specific for S. thermophilus JCM20026, LMG6896, LMG18311, OJT101, OJT102 but not Enteroccocus spp., Lactococcus lactis subsp. lactis, and Streptococcus salivarius which are phylogenetically closely related to S. thermophilus and are difficult to identify using culture-based methods. The linear range of the developed real-time PCR method was from 2.7 to 8.6 log CFU ml^?1 with an amplification efficiency of 96%. Minor differences (about 0.4 log CFU ml^?1) were observed between counts of S. thermophilus obtained by culture and real-time PCR method in plain yoghurt and yoghurt containing fruits. Therefore, the developed real-time PCR method could be of potential application in specific detection and accurate enumeration of S. thermophilus in a wide range of dairy products.     

Programmed High‐Hole‐Mobility Supramolecular Polymers from Disk‐Shaped Molecules

In this paper a simple, casting solution technique for the preparation of two‐dimensional (2D) arrays of very‐high molecular weight (MW) 1D‐Pc supramolecular inorganic polymers is described. The soluble fluoroaluminium tetra‐tert‐butylphthalocyanine (ttbPcAlF) is synthesized and characterized, which can be self‐assembled to form 2D arrays of very‐high‐MW 1D‐Pc supramolecular inorganic polymers. High‐resolution transmission electron microscopy (HRTEM) demonstrates that the 1D‐ttbPcAlF, having a cofacial ring spacing of ～0.36 nm and an interchain distance of ～1.7 nm, self‐assembles into 2D‐nanosheets (～140 nm in length, ～20 nm in width, and equivalent to MW of 3.2 × 10⁵ g mol^?1). The film cast from a 1,2‐dichloroethane (DCE) solution shows a minimum hole‐mobility of ～0.3 cm² V^?1 s^?1 at room temperature by flash‐photolysis time‐resolved microwave conductivity (TRMC) measurements and a fairly high dark dc‐conductivity of ～1 × 10^?3 S cm^?1.