Three-Dimensional Packaging Technology for Stacked DRAM With 3-Gb/s Data Transfer

A 3-D packaging technology is developed for stacked dynamic random access memory (DRAM) with through-silicon vias (TSVs). Eight different dry etchers were evaluated for deep Si etching. Highly doped poly-Si TSVs were used for vertical traces inside silicon and interconnection between DRAM chips to realize a DRAM-compatible process. Through optimization of process conditions and layout design, a fast poly-Si filling has been obtained. The entire packaging was carried out at the wafer level by using smart chip connection with feedthrough interposer (FTI) technology. A new bump and wiring structure for the FTI has also been developed for fine-pitch and low-cost bonding. Normal operation during DRAM read/write was confirmed on a 512-Mb DRAM with TSVs, with an I/F chip as a memory controller. Simulation and measurement of the transfer function of the FTI wiring showed a 3-Gb/s/pin data transfer capability.     

Branched graft technique for middle aortic syndrome. Three case reports

Those who work in the area of vocabularies, like all researchers, bring some assumptions to that work. Such assumptions include both cultural notions and beliefs specific to particular social worlds within the broader society. In this article, assumptions and beliefs expressed by participants during the conference on "Implementation of Nursing Vocabularies in Computer-based Systems" are summarized. Questions are raised concerning the relationship between cultural notions and beliefs and nursing vocabularies.     

Preparation of Matrix-Type Nickel Oxide/Samarium-Doped Ceria Composite Particles by Spray Pyrolysis

Matrix-type nickel oxide (NiO)/samarium-doped ceria (SDC) composite particles, in which NiO and SDC nano-particles were homogeneously dispersed, were synthesized by spray pyrolysis (SP) for an anode precursor of intermediate-temperature solid oxide fuel cells (IT-SOFCs). SP of an aqueous solution containing Ni, Ce, and Sm salts resulted in capsule-type composite particles that had NiO enveloped with SDC. The capsule-type composite particles actually prevent Ni aggregation between particles, but they cannot have a large contact area between nickel (Ni) and SDC. A matrix-type composite particle is expected to have a large contact area because the matrix-type composite is comprised of nanometer-sized Ni and SDC particles. An adequate addition of ethylene glycol successfully resulted in matrix-type NiO/SDC composite particles. The matrix-type composite particles also showed higher anode performance than the capsule-type composite particles in these experiments and they were effective as precursors of high-performance IT-SOFC anodes.     

Thermal stress measurement in steel plate strengthened by CFRP and aluminum alloy plates

In steel members strengthened by carbon-fiber reinforced polymer (CFRP) plates, the thermal stresses are introduced in the steel members, the CFRP plates and the adhesive layers when temperature changes because the linear thermal expansion coefficients of steel and CFRP are mismatched. As so far, the authors proposed a technique to reduce the thermal stress in steel members strengthened by CFRP plates, which involves bonding aluminum alloy plates with CFRP plates. In the proposed method, the thermal stress in steel member can be reduced so that there are negligible levels of stress in steel member when the cross sectional areas of CFRP and aluminum plates are designed to correspond to the coefficient of thermal expansion of steel, even though the thermal stresses are introduced in the CFRP and aluminum plates. In this study, to confirm the maintaining the thermal stress reduction in steel member by proposed method, thermal stress measurement in steel plate strengthened by CFRP and aluminum plates was carried out about 21 months. In this research, the thermal stress introduced in the steel plate strengthened by CFRP plates was also measured. Furthermore, to assume the thermal shear and normal (peel) stresses in adhesive layers, FE analysis with plane stress element was employed. As the result, it was shown the thermal stresses in steel plate with CFRP plate were able to calculate by using composite theory and measured temperature. Furthermore, in steel plate strengthened by CFRP and aluminum plates, the thermal stress introduced in steel plate was negligible-small through the all-season. It was found the thermal stresses in steel plate with CFRP plates as well as CFRP and aluminum plates were also estimated by using composite theory and measured temperature. In the steel plate strengthened by CFRP and aluminum plates, the thermal shear and normal stresses in adhesive layer glued to steel plate become smaller than that in the conventional CFRP bonded specimen. However, the shear stress in adhesive layers between CFRP and aluminum plates in proposed method was higher than the thermal stress in adhesive layers between CFRP plates in conventional method.     

In vivo monitoring of intravenously injected gold nanorods using near-infrared light

Gold nanorods showing surface plasmon (SP) bands in the near-IR region are used as bioimaging probes that respond to near-IR light in mice. The SP bands of intravenously injected polyethylene glycol-modified gold nanorods are directly monitored from the mouse abdomen by using a spectrophotometer equipped with an integrating sphere. The absorbance at 900 nm from the gold nanorods immediately increases after injection and reaches a plateau. The injection of phosphatidylcholine-modified gold nanorods also increases the absorbance at 900 nm, but the absorbance decreases single exponentially with a 1.3-min half-life. In vivo spectral changes of gold nanorods depend on the surface characteristics, and can be observed in real time using simple spectroscopic measurements.     

System preservation of a cooperative manipulator system

This paper proposes a method of maintaining the stability of robotic manipulators with network connection which are doing cooperative tasks. Such robotic manipulator systems have many possibilities, but they sometimes fall into unstable states due to double connection, that is, mechanical and informational connection. To avoid such unstable oscillations, the proposed method utilizes a kind of torque limiter and a notch filter. © 1997 Scripta Technica, Inc Electr Eng Jpn, 121(2): 47–53, 1997     

Oral Squamous Cell Carcinoma Contributes to Differentiation of Monocyte-Derived Tumor-Associated Macrophages via PAI-1 and IL-8 Production

Tumor-associated macrophages (TAMs) promote cancer cell proliferation and metastasis, as well as anti-tumor immune suppression. Recent studies have shown that tumors enhance the recruitment and differentiation of TAMs, but the detailed mechanisms have not been clarified. We thus examined the influence of cancer cells on the differentiation of monocytes to TAM subsets, including CD163⁺, CD204⁺, and CD206⁺ cells, in oral squamous cell carcinoma (OSCC) using immunohistochemistry, flow cytometry, and a cytokine array. Furthermore, we investigated the effect of OSCC cells (HSC-2, SQUU-A, and SQUU-B cells) on the differentiation of purified CD14⁺ cells to TAM subsets. The localization patterns of CD163⁺, CD204⁺, and CD206⁺ in OSCC sections were quite different. The expression of CD206 on CD14⁺ cells was significantly increased after the co-culture with OSCC cell lines, while the expressions of CD163 and CD204 on CD14⁺ cells showed no change. High concentrations of plasminogen activator inhibitor-1 (PAI-1) and interleukin-8 (IL-8) were detected in the conditioned medium of OSCC cell lines. PAI-1 and IL-8 stimulated CD14⁺ cells to express CD206. Moreover, there were positive correlations among the numbers of CD206⁺, PAI-1⁺, and IL-8⁺ cells in OSCC sections. These results suggest that PAI-1 and IL-8 produced by OSCC contribute to the differentiation of monocytes to CD206⁺ TAMs.     

Tailoring fiber grating sensors for assessment of highly refractive fuels

Three approaches that allow the tailoring of long period gratings based refractometric sensors for concentration measurement in fuel blends are employed to assess the fuel quality in biodiesel and biodiesel-petrodiesel blend. To allow the analysis of fuel samples with refractive index higher than fiber cladding one, the samples refractive indices were changed by thermo-optic effect and by dilution in a standard substance with low refractive index. The obtained results show the sensor can detect oil concentration in biodiesel samples with resolution as better as 0.07% and biodiesel concentration in biodiesel-petrodiesel samples with average resolution of 0.09%.     

Alloying effects on the hydride formation of Zr(Mn1−xCox)2

To study the alloying effects on ZrMn₂-H system, thermodynamic properties of Zr(Mn_1−xCo_x)₂ hydride were measured by volumetric method. ZrMn₂ gave a single plateau region in the pressure-composition isotherm. On the other hand, double plateaus were clearly observed in Zr(Mn_0.7Co_0.3)₂ and Zr(Mn_0.6Co_0.4)₂-H systems. The appearance of the double plateau characteristics would be explained in view of the hydrogen binding in the tetrahedral occupation sites in Zr(Mn_1−xCo_x)₂. Since the hydrogen binding in the tetrahedral 2ZrMnCo site would be less stable than that in the 2Zr2Mn site, the equilibrium pressure increases with increasing cobalt content. The appearance of the first plateau was ascribed the increase in the bonding of Mn-H in 2Zr2Mn site adjoining the 2ZrMnCo site.