Daily impact of climate on the pattern of urban family life : Indigenous courtyard houses of Baghdad regions of the hot-dry climates Part I: Daily shifts or daily movements in summer

During the day, there are considerable variations in the climatic factors prevailing in these regions. This is especially so during the 24-hour daily cycle of the long, hot and dry summer (mid-May to midOctober). Such climatic conditions have had a considerable impact on the daily living pattern of family life in the same season, particularly in the urban areas. During the same 24-hour cycle, they have compelled the inhabitants to shift their living activities both vertically in section and horizontally in plan; they do this in pursuit of more acceptable, if not, desirable internal thermal environmental ambience.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Microstructural Investigation on Failure of Internal Drive Shaft

17-4 PH stainless steel is used as internal drive shaft material in liquid engine pumps. One of the drive shafts failed during operation. The shaft pieces were in contact for short duration after failure, which has resulted in abrasion of fractured surfaces. Samples from the location of failure were taken, and investigation of the failure was carried out using optical and scanning electron microscopy. The microstructural analysis of the material and fractographic analysis of the fractured surface show that the failure was caused by excessive torsion.     

Detecting nondeterminacy in parallel programs

Methods and tools for detecting nondeterminacy in programs for shared-memory multiprocessors are discussed. The approach described divides the debugging chore into two phases. The first phase uses tools that automatically detect nondeterminacy to debug synchronization errors, assuming it is decided at the outset to make the parallel program determinate. At the end of this phase, it is known that the program is determinate, that timing differences will not affect results, and the debugging sessions are repeatable. In the second phase, an interactive break-point debugger is used to find arithmetic and logical errors. The proposed tools fall into two groups: those that statically analyze the source program and those that analyze an execution trace of the program     

ENVIRONMENTAL TOBACCO SMOKE REMOVAL CAPABILITY OF ACTIVATED CARBON

Removal of gaseous and vapor constituents of environmental tobacco smoke (ETS) by activated carbons in a packed bed arrangement was studied under dynamic conditions and was compared with that by silica gel and molecular sieve 13X. ETS is a mixture of sidestream smoke and exhaled mainstream smoke, and it consists of various organic and inorganic compounds, trace heavy metals, and particulate matters. Due to the complex nature of ETS-air mixture, its removal from indoors is a challenging task. For experimentation in a laboratory, the ETS was produced from a specially designed smoking apparatus that simulated the puffng of a cigarette by a person. Air containing ETS was passed through a bed containing about 25 grams of activated carbon at room temperature. The flow rate of air-ETS mixture through the bed was 4000 cm3/min. The relative humidity of the air was 50% and contained about 35 to 40 ppm of hydrocarbons as measured as methane-equivalent. The number of particles in the inlet air stream were in the range of 30,000 to 35,000 particles/cm3. About 60% of hydrocarbons present in ETS were removed at these operating conditions for a period of about 70 hours. Based on 15 adsorption and regeneration cycles, it was noted that the carbon bed did not loose its capacity for ETS significantly as indicated by the BET surface area and water adsorption data. At the beginning of an adsorption cycle, the carbon bed captured a significant number of particles. However, the bed rapidly lost its particle capture effciency as the experiment progressed. The number of particles in the outlet air stream was found to be the same as that of the inlet stream within five minutes.     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

Characterization of tempered martensite embrittlement using hardness measurement

A series of experiments were carried out on three commercial steels to explore the possibility for characterizing tempered martensite embrittlement (TME) by Rockwell, macro-, and micro-Vickers hardness tests. The results indicate distinct hardness peaks in two steels and an inflection in the other around the TME temperature. A new analytical approach for examining the slope of hardness-tempering temperature plots appears to reveal the TME phenomenon more sensitively. Dilatometric examinations substantiate that the temperature of hardness peak/inflection occurs beyond the second stage of tempering.     

On the notion of control signals in digital designs

The concept of control signals is fundamental to digital design. It evokes the notion of one or more signals that influence computation on other signals in a system, and regulate the behavior of the system. A formal definition of control signals is presented. It is argued that knowledge of the control signals in a complex design such as a microprocessor or a computer is crucial to the comprehension and specification of the design and that knowledge of the control signals of a design leads to a more efficient hardware implementation. The identification of control signals in two microprocessors are presented as examples