Coded excitation with spectrum inversion (CEXSI) for ultrasound array imaging

In this paper, a scheme called coded excitation with spectrum inversion (CEXSI) is presented. An established optimal binary code whose spectrum has no s and possesses the least variation is encoded as a burst for transmission. Using this optimal code, the decoding filter can be derived directly from its inverse spectrum. Various transmission techniques can be used to improve energy coupling within the system pass-band. We demonstrate its potential to achieve excellent decoding with very low (<80 dB) side-lobes. For a 2.6 /spl mu/s code, an array element with a center frequency of 10 MHz and fractional bandwidth of 38%, range side-lobes of about 40 dB have been achieved experimentally with little compromise in range resolution. The signal-to-noise ratio (SNR) improvement also has been characterized at about 14 dB. Along with simulations and experimental data, we present a formulation of the scheme, according to which CEXSI can be extended to improve SNR in sparse array imaging in general.     

Phase reconstruction from intensity measurements in linear systems

The phase of a signal at a plane is reconstructed from the intensity profiles at two close parallel screens connected by a small abcd canonical transform; this applies to propagation along harmonic and repulsive fibers and in free media. We analyze the relationship between the local spatial frequency (the signal phase derivative) and the derivative of the squared modulus of the signal under a one-parameter canonical transform with respect to the parameter. We thus generalize to all linear systems the results that have been obtained separately for Fresnel and fractional Fourier transforms.     

Synthesis of Si3N4 using sepiolite and various sources of carbon

Sepiolite of Turkish origin was used as Si precursor in the syntheses of silicon nitride (Si₃N₄) powders by carbothermal reduction-nitridation (CRN) by mixing with several reducing agents i.e. charcoal, carbon black and petroleum coke as discrete particles and acrylonitrile as an intercalation medium. Purified sepiolite samples with a pre-determined C/SiO₂ ratio of 4 yielded Si₃N₄ powders after firing at temperatures 1300–1475°C under continuous nitrogen flow. The various sepiolite-reducing agent combinations were evaluated. The / ratio and secondary phase content of the powders after CRN were found to depend on temperature, time, heating rate and on the physicochemical properties of the precursor used such as, surface area and mixing of the reactants.     

Sepiolite-PAN intercalation used as Si3N4 forming precursor

Silicon nitride (Si₃N₄) formation was investigated using sepiolite and polyacrylonitrile as silicon and carbon source, respectively. It was found that purified sepiolite could readily adsorb a sufficient amount of acrylonitrile (AN) reagent without pre-treatment. Polymerisation of sepiolite-AN mixtures and subsequent cyclization of the polymerised complex yielded a precursor, which was found ideal as a starting material in carbothermal reduction-nitridation (CRN) for the formation of silicon nitride powders. The quantity of silicon nitride, grain size and morphology were found to be dependent on the reaction conditions and starting reagent. Fine grain size, high surface area (up to approx. 12.4 m²/g) powders of mainly -Si₃N₄ were obtained via pyrolysis of sepiolite-PAN complex after 4 h heating at 1400°C in 1000 ml/min nitrogen flow with a heating rate of 300°C/h. Mg retained in the molecular structure of the mineral must have promoted the formation of -grains in CRN process.     

Infrastructures for the environment of multiagent systems

The notion of environment is receiving an increasing attention in the development of multiagent applications. This is witnessed by the emergence of a number of infrastructures providing agent designers with useful means to develop the agent environment, and thus to structure an effective multiagent application. In this paper we analyse the role and features of such infrastructures, and survey some relevant examples. We endorse a general viewpoint where the environment of a multiagent system is seen as a set of basic bricks we call environment abstractions, which (i) provide agents with services useful for achieving individual and social goals, and (ii) are supported by some underlying software infrastructure managing their creation and exploitation. Accordingly, we focus the survey on the opportunities that environment infrastructures provide to system designers when developing multiagent applications.     

Design of phononic materials/structures for surface wave devices using topology optimization

We develop a topology optimization approach to design two- and three-dimensional phononic (elastic) materials, focusing primarily on surface wave filters and waveguides. These utilize propagation modes that transmit elastic waves where the energy is contained near a free surface of a material. The design of surface wave devices is particularly attractive given recent advances in nano- and micromanufacturing processes, such as thin-film deposition, etching, and lithography, which make it possible to precisely place thin film materials on a substrate with submicron feature resolution. We apply our topology optimization approach to a series of three problems where the layout of two materials (silicon and aluminum) is sought to achieve a prescribed objective: (1) a grating to filter bulk waves of a prescribed frequency in two and three dimensions, (2) a surface wave device that uses a patterned thin film to filter waves of a single or range of frequencies, and (3) a fully three-dimensional structure to guide a wave generated by a harmonic input on a free surface to a specified output port on the surface. From the first to the third example, the resulting topologies increase in sophistication. The results demonstrate the power and promise of our computational framework to design sophisticated surface wave devices.     

Smoothness perception

Despite the complexity of the Human Visual System (HVS), research over the last few decades has highlighted a number of its limitations. These limitations can be exploited in computer graphics to significantly reduce computational cost and thus required rendering time, without a viewer perceiving any difference in resultant image quality. Furthermore, cross-modal interaction between different modalities, such as the influence of audio on visual perception, has also been shown as significant both in psychology and computer graphics. In this paper we investigate the effect of beat rate on temporal visual perception, i.e. frame rate perception. For the visual quality and perception evaluation, a series of psychophysical experiments was conducted and the data analysed. The results indicate that beat rates in some cases do affect temporal visual perception and that certain beat rates can be used in order to reduce the amount of rendering required to achieve a perceptual high quality. This is another step towards a comprehensive understanding of auditory-visual cross-modal interaction and could be potentially used in high-fidelity interactive multi-sensory virtual environments.     

Hierarchical finite state machines for autonomous mobile systems

This paper proposes a system architecture, related design approaches for autonomous mobile systems and guidelines for self-sufficient autonomy. Development of a tiered layout for a hybrid-state control in a series of stages as well as the integration of such a controller in the overall autonomy structure are proposed and demonstrated as part of multiple examples, including The Ohio State University participation in DARPA Urban Challenge 2007. The hierarchical layout and the iterative design methodology enable a certain level of design flexibility for the overall system and preparation for various contingencies, as illustrated on specific development cycles.     

Graft copolymerization of poly(methyl methacrylate) with some alkyl methacrylates by atom transfer radical polymerization method and thermal properties

The preparation of graft copolymers of poly(methyl methacrylate) with some alkyl methacrylates were carried out via atom transfer radical polymerization method catalyzed by CuCl/2,2′-bipyridine and using a macroinitiator, poly[(methyl methacrylate)-co-(3,5-bis(chloroacetoxy)phenyl methacrylate)], including an amount of 1 mol % having α-halogeno carbonyl group in the side groups. Although the number-average molecular weights of a graft copolymer series of n-butyl methacrylate (n-ButMA) ended at different times increased from 55,700 to 99,500, the polydispersities decreased from 1.85 to 1.39 with time. The thermal degradation kinetics of macroinitiator and a two-armed graft copolymer of n-ButMA with this macroinitiator, PMMA-g-PnButMA: 4% (by mol), were carried out at different heating rates by thermogravimetric analysis and the results were compared. Using both the Flynn–Wall–Ozawa and Kissinger methods, the decomposition activation energies for macroinitiator were determined as 168 and 162 kJ/mol, respectively; they were also calculated as 233 and 239 kJ/mol for PMMA-g-PnButMA: 4%. The solid state thermodegradation mechanisms of both macroinitiator and PMMA-g-PnButMA: 4% are R₁-type mechanism, a phase boundary-controlled reaction, and F₁-type mechanism, a random nucleation with one nucleus on the individual particle, respectively. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012