Alumina–carbon composite fibers from poly[(acyloxy)aloxane]s

The alumina–carbon composite fibers were obtained from poly[(acyloxy)aloxane] (PAA) with 3-ethoxypropanoic (EPA) and m-anisic acids (m-AA) legands. This preceramic polymer can be dissolved in p-xylene-methanol-EPA mixed solvent, and the concentrated solution exhibited an excellent spinnability. During the pyrolysis and sintering processes, aliphatic carboxylate in the side groups was easily decomposed and eliminated. The aromatic carboxylate, however, seems to be converted and migrated to a carbon domain in the alumina matrix into which aloxane repetition was converted. The fibers pyrolyzed up to 800 and 1000°C have electrical conductivities that monotonically increase with increasing temperature. The fiber pyrolyzed up to 1200°C showed the electrical conductivity in a rather complicated manner.     

Low-temperature hydrodechlorination of chlorobenzenes on platinum-supported alumina catalysts

Hydrodechlorination of chlorobenzenes on platinum (Pt)-supported γ-alumina and alumina Lewis superacid (AmLSA) catalysts was carried out at room temperature and ambient pressure using a fixed bed flow reactor and a semi-batch reactor. Both the catalysts indicated good activity for the hydrodechlorination, but the former was superior to the latter. The hydrodechlorinations of reactants C₆H_6−xCl_x (x=1, 2, 3) proceeded step-wisely to benzene and then cyclohexane via C₆H_6−yCl_y (y=x−1). The reactions seem to be promoted by the contribution of spillover hydrogen formed on the Pt-supported catalysts. The catalysts deactivated with reaction time and the amount of chlorine that accumulated on the Pt-supported γ-alumina catalyst in the hydrodechlorination of 1,4-dichlorobenzene for 3 h was near to that estimated from the converted reactant molecules. When the deactivated catalysts were treated in a stream of hydrogen above 503 K, the original activity was completely restored, but the deactivation phenomenon with reaction time was observed again.     

Synthesis of single-phase Ti3SiC2 powder

In this study, free 2Ti/2Si/3TiC powder mixture was heated at high temperatures in vacuum, in order to reveal the possibility for the synthesis of high Ti₃SiC₂ content powder. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for the evaluation of phase identities and the morphology of the powder after different treatments. Results showed that almost single phase Ti₃SiC₂ powder (99.3 wt.%) can be synthesized by heat treatment with free 2Ti/2Si/3TiC powders in vacuum at 1210°C for about 3 h. The nucleation and growth of Ti₃SiC₂ within TiC particles was observed. The typical appearance of the formed Ti₃SiC₂ is equiaxed with particle size of 2–4 μm. Effects of temperature and heating time on the morphology and the particle sizes of the synthesized Ti₃SiC₂ powders are not obvious.     

Fabrication and Microstructure Characterization of Ti3SiC2 Synthesized from Ti/Si/2TiC Powders Using the Pulse Discharge Sintering (PDS) Technique

Ti/Si/2TiC powders were prepared using a mixture method (M) and a mechanical alloying (MA) method to fabricate Ti₃SiC₂ at 1200°–1400°C using a pulse discharge sintering (PDS) technique. The results showed that the Ti₃SiC₂ samples with <5 wt% TiC could be rapidly synthesized from the M powders; however, the TiC content was always >18 wt% in the MA samples. Further sintering of the M powder showed that the purity of Ti₃SiC₂ could be improved to >97 wt% at 1250°–1300°C, which is ∼200°–300°C lower than that of sintered Ti/Si/C and Ti/SiC/C powders using the hot isostatic pressing (HIPing) technique. The microstructure of Ti₃SiC₂ also could be controlled using three types of powders, i.e., fine, coarse, or duplex-grained, within the sintering temperature range. In comparison with Ti/Si/C and Ti/SiC/C mixture powders, it has been suggested that high-purity Ti₃SiC₂ could be rapidly synthesized by sintering the Ti/Si/TiC powder mixture at relatively lower temperature using the PDS technique.     

Ru-catalyzed anode materials for direct hydrocarbon SOFCs

A solid oxide fuel cell using a thin ceria-based electrolyte film with a Ru-catalyzed anode was directly operated on hydrocarbons, including methane, ethane, and propane, at 600 °C. The role of the Ru catalyst in the anode reaction was to promote the reforming reaction of the unreacted hydrocarbons by the produced steam and CO₂, which avoided interference from steam and CO₂ in the gas-phase diffusion of the fuels. The resulting peak power density reached 750 mW cm⁻² with dry methane, which was comparable to the peak power density of 769 mW cm⁻² with wet (2.9 vol.% H₂O) hydrogen. More important was the fact that the cell performance was maintained at a high level regardless of the change in the methane utilization from 12 to 46% but was significantly reduced by increasing the hydrogen utilization from 13 to 42%. While the anodic reaction of hydrogen was controlled by the slow gas diffusion, the anodic reaction of methane was not subject to the onset of such a gas-diffusion process.     

A 31P-NMR study of peroxo species formed during oxidation of cyclohexene with hydrogen peroxide in tri-n-butylphosphate catalyzed by heteropolyacids

In the oxidation of cyclohexene with H₂O₂in monophasic tri-n-butylphosphate (TBP) solution catalyzed by Keggin-type 12-heteropolyacids, i.e., H₃PMo_12-xW _x O₄₀(x=0–12), several peroxo species were observed by ³¹P-NMR spectroscopy in lower field than the original heteropolyacids. Their composition varied regularly with that of the starting catalyst. The P-containing peroxo species formed was deduced as [PM₄O₈(O₂)₈]^3-(M = Mo, W). The peroxo species formed more easily with a decrease in the W content, x of H₃PMo_12-xW_xO₄₀. It was further indicated from the reactivity with cyclohexene and the comparison with catalytic performance that W-rich peroxo species were catalytically more active than Mo-rich peroxo species for the oxidation of cyclohexene in this reaction system.     

Preparation of sharp-melting hard palm midfraction and its use as hard butter in chocolate

Preparation of hard palm midfractions (PMF) and its use as a cocoa butter equivalent ingredient were studied. Hard PMF is obtained by multistep fractionation of palm oil involving dry fractionation (DF) and/or solvent fractionation (SF), usually using hexane or acetone. From our experience, in acetone, a polar solvent, symmetrical 1,3-disaturated triacylglycerols tend to selectively crystallize more than nonsymmetrical 1,2- or 2,3-disaturated triacylglycerols, making it suitable for obtaining the solid midfraction. Unfortunately, triacylglycerols are very soluble in hexane, and temperatures at least 15 degrees lower than those required for acetone must be used for equivalent crystal yields. On the other hand, DF is a less expensive and safer process. Thus, multistep fractionation combining DF and SF using acetone was developed to achieve sufficient removal of high-melting components, and further enrichment of 1,3-dipalmitoyl-2-oleoylglycerol and the hard PMF was obtained by triple-step fractionation of palm olein or double-step fractionation of soft PMF. Compared to conventional hard PMF, this hard PMF had a steeper melting curve and better snapping and sharp-melting qualities when used in chocolate. Heat resistance of the hard PMF chocolate was similar to the conventional hard PMF chocolate, and its bloom resistance could be improved by adding polyglycerol fatty acid esters.     

EFFECT OF INFRARED IRRADIATION ON DRYING CHARACTERISTICS OF WET POROUS MATERIALS

ABSTRACT

We studied infrared drying characteristics of wet porous materials by comparison with the convective drying characteristics, and our attention was focused on the factors influencing their characteristics. By selecting three kinds of membrane filters, we examined the influences of the mean pore diameter and the spectral distribution of irradiation power as variables using a far-infrared heater and a near-infrared heater. The differences between the infrared and convective drying characteristics (drying rate, sample temperature, water content distribution) were experimentally obtained, and the influence of mean pore diameter of the sample on its drying characteristics was observed only in infrared drying but in convective drying. By measuring the diffuse transmittance of the membrane filter in consideration of the drying process, we deliberated that infrared radiation penetrating into the drying sample was absorbed directly by the water in the voids, and that the water vaporized there.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.