Effects of Annealing Treatment Prior to Cold Rolling on the Edge Cracking Phenomenon of Ferritic Lightweight Steel

Effects of annealing treatment from 923 K to 1023 K (650 °C to 750 °C) prior to cold rolling on the edge cracking phenomenon of a ferritic lightweight steel were investigated. The edge cracking was severely found in the hot-rolled and 923 K (650 °C)-annealed steels after cold rolling, whereas it hardly occurred in the 1023 K (750 °C)-annealed steel. As the annealing temperature increased, lamellar κ-carbides were dissolved and coarsened, and most of the κ-carbides continuously formed along boundaries between ferrite and κ-carbide bands disappeared. Microstructural observation of the deformed region of tensile specimens revealed that the removal of band boundary κ-carbides reduced the difference in tensile elongation along the longitudinal direction (LD) and transverse direction (TD), which consequently led to the reduction in edge cracking. The 1023 K (750 °C)-annealed steel showed fine ferrite grain size, weak texture, and decomposed band structure after subsequent cold rolling and intercritical annealing, because κ-carbides actively worked as nucleation sites of ferrite and austenite. The present annealing treatment prior to cold rolling, which was originally adopted to prevent edge cracking, also beneficially modified the final microstructure of lightweight steel.     

Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel

The effects of Al content on cracking phenomena occurring during cold rolling of ferritic lightweight steels were investigated in relation to microstructural modification including κ-carbides. Three steels were fabricated, varying the Al content between 4 and 6 wt.%, and the center and edge areas of steel sheets containing 6 wt.% Al were cracked during cold rolling. The three steels were composed of ferrite grains and κ-carbides in a banded shape, and the overall volume fraction of κ-carbide increased with increasing Al content. The shape of lamellar κ-carbides inside κ-carbide bands was changed from short and thin to long and thick. Microstructural observation of the deformed region of fractured tensile specimens revealed that deformation bands were homogeneously formed in wide areas of ferrite matrix in the steels containing 4–5 wt.% Al, and κ-carbide bands and boundary κ-carbides were hardly cracked. In the steel containing 6 wt.% Al, however, microcracks were initiated at grain boundary κ-carbides and long lamellar κ-carbides inside κ-carbide bands. They led to the center or edge cracking during cold rolling. To prevent or minimize cracking, it was necessary to avoid the lengthening or thickening of lamellar κ-carbides. Therefore, it was recommended that the steels should be rapidly cooled from the finish rolling temperature to the coiling temperature through the formation temperature of κ-carbide.     

MIXED CONVECTION FROM A MULTIBLOCK HEATER IN A CHANNEL WITH IMPOSED THERMAL MODULATION

Enhancement of mixed-convection heat transfer in a multiblock heater arrangement in a channel is studied. At the most upstream heated block, a time-periodic heat generation is present, while the heat generation is constant in other heater blocks. The explicit effect of using thermal modulation (time-periodic heat generation) at the upstream heater is examined by acquiring comprehensive numerical solutions. The heat transfer enhancement is pronounced at the heaters at far downstream, and the augmentation is maximized when resonance is realized. The resonance frequency is close to the natural frequency of the system, which scales with the time for the main stream to travel through the interblock region. Plots are illustrated to demonstrate the formations of a pair of circulations downstream of the most upstream heater, which leads to identifying the natural frequency. The increase in the overall pressure drop is calculated. The benefit of heat transfer augmentation, as opposed to the increased pressure drop, is assessed to justify the use of thermal modulation in the upstream heater.     

Efficient statistical tolerance analysis for general distributions using three-point information

The experimental design technique in the literature, which has been limited only to normally distributed random variables, is extended to handle non-normal cases. It is easy to implement and provides good results for the moments of system response functions compared with other traditional methods. It is based on the three-level Taguchi method, and optimum levels and weights to handle non-normal distributions are derived. A systematic procedure for tolerance analysis is then proposed by using the Pearson system. Numerical results for non-linear examples are shown to be very accurate in comparison with those from Monte Carlo simulations and the first-order reliability method.     

A hierarchical approach for the capacitated lot-sizing and scheduling problem with a special structure of sequence-dependent setups

This research deals with the single machine multi-product capacitated lot-sizing and scheduling problem (CLSP) with sequence-dependent setup times and setup costs. The CLSP determines the production quantities and the sequence to satisfy deterministic and dynamic demand during multiple periods. The objective is to minimise the total sum of the inventory holding costs and the sequence-dependent setup costs. We consider a special form of sequence-dependent setup times where the larger product we produce next, the more setup time we need. As a solution approach, we propose a two-level hierarchical method consisting of upper-level planning and the lower-level planning. In the upper-level planning, we solve the lot-sizing problem with estimated sequence-independent setup times utilising the characteristic of the special structure of setup times. Then we solve the scheduling problem in the lower-level planning. The proposed method is compared with the single-level optimal CLSP solution and an existing heuristic developed for the uniform structure of setup times.     

Effect of Tempering Time on Microstructure, Tensile Properties, and Deformation Behavior of a Ferritic Light-Weight Steel

In the present study, a ferritic light-weight steel was tempered at 973 K (700 °C) for various tempering times, and tensile properties and deformation mechanisms were investigated and correlated to microstructure. ??-carbides precipitated in the tempered band-shaped martensite and ferrite matrix, and the tempered martensite became more decomposed with increasing tempering time. Tempering times for 3 days or longer led to the formation of austenite as irregular thick-film shapes mostly along boundaries between the tempered martensite and the ferrite matrix. Tensile tests of the 1-day-tempered specimen showed that deformation bands were homogeneously spread throughout the specimen, and that the fine carbides were sufficiently deformed inside these deformation bands resulting in high strength and ductility. The 3-day-tempered specimen showed a small amount of boundary austenite, which readily developed voids or cracks and became sites for fracture. This cracking at boundary austenites became more prominent in the 7- and 15-day-tempered specimens, as the volume fraction of boundary austenites increased with increasing tempering time. These findings suggested that, when the steel was tempered at 973 K (700 °C) for an appropriate time, i.e., 1 day, to sufficiently precipitate ??-carbides and to prevent the formation of boundary austenites, that the deformation occurred homogeneously, leading to overall higher mechanical properties.     

Nonselective blocking of the sympathetic nervous system decreases detrusor overactivity in spontaneously hypertensive rats

The involuntary dual control systems of the autonomic nervous system (ANS) in the bladder of awake spontaneously hypertensive rats (SHRs) were investigated through simultaneous registrations of intravesical and intraabdominal pressures to observe detrusor overactivity (DO) objectively as a core symptom of an overactive bladder. SHRs (n = 6) showed the features of overactive bladder syndrome during urodynamic study, especially DO during the filling phase. After injection of the nonselective sympathetic blocking agent labetalol, DO disappeared in 3 of 6 SHRs (50%). DO frequency decreased from 0.98 ± 0.22 min(-1) to 0.28 ± 0.19 min(-1) (p < 0.01), and DO pressure decreased from 3.82 ± 0.57 cm H(2)O to 1.90 ± 0.86 cm H(2)O (p < 0.05). This suggests that the DO originating from the overactive parasympathetic nervous system is attenuated by the nonselective blocking of the sympathetic nervous system. The detailed mechanism behind this result is still not known, but parasympathetic overactivity seems to require overactive sympathetic nervous system activity in a kind of balance between these two systems. These findings are consistent with recent clinical findings suggesting that patients with idiopathic overactive bladder may have ANS dysfunction, particularly a sympathetic dysfunction. The search for newer and better drugs than the current anticholinergic drugs as the mainstay for overactive bladder will be fueled by our research on these sympathetic mechanisms. Further studies of this principle are required.     

In vitro simulation. Early results of stereotaxy for pedicle screw placement

STUDY DESIGN: Frameless stereotaxy with doppler ultrasound and three dimensional computer model registration is assessed in vitro for pedicle screw placement. OBJECTIVE: To identify feasibility of pedicle screw navigation and placement using this technology. SUMMARY OF BACKGROUND DATA: Inaccurate pedicle screw placement can lead to neurovascular injury or suboptimal fixation. Present techniques in pedicle screw placement involve only confirmation of hole orientation. METHOD: Forty-four pedicle screws were placed in lumbosacral models and cadaver specimens. Accuracy was assessed with a computed tomography scan and vertebral cross sectioning. RESULTS: All screws were intrapedicular. Accuracy of anterior cortical fixation was 1.5 mm, with a range of 2.5 mm. CONCLUSION: In vitro frameless stereotaxy is accurate for pedicle screw placement. This technology adds a component of navigation to pedicle screw placement.     

HPLC-MS/MS analysis of 9 artificial sweeteners in imported foods

An analytical method for the simultaneous determination of 9 artificial sweeteners (acesulfame-K, cyclamate, sodium saccharin, aspartame, alitame, neotame, sucralose, dulcin, and neohesperidine dihydrochalcone) in imported foods by HPLC-MS/MS was developed. Samples were extracted with buffer solution (pH 4.5). The supernatant was analyzed by HPLC-MS/MS after centrifugation and filtration. The sample was separated on a thermo hypersil BPS C₁₈ (250×3 mm, 5-μm) column, and detected by MS/MS with selective reaction monitoring (SRM) mode. The correlation coefficients (r ²) of the calibration curve were >0.99. The recoveries were 90.0–107.5% with good coefficients of variation of 1.8–8.6%. The limits of detection and limits of quantification were between 0.001 and 0.375 mg/mL and between 0.003 and 1.125 mg/mL, respectively. The proposed method has been successfully applied to the determination of the 9 sweeteners in various foods.

     

Surface‐Mediated Nucleic Acid Delivery by Lipoplexes Prepared in Microwell Arrays

Many delivery methods have been developed to improve the therapeutic efficacy and facilitate the clinical translation of nucleic acid‐based therapeutics. A facile surface‐mediated nucleic acid delivery by lipoplexes is prepared in a microwell array, which combines the advantages of lipoplexes as an efficient carrier system, surface‐mediated delivery, and the control of surface topography. Uniform disc‐like lipoplexes containing nucleic acids are formed in the microwell array with a diameter of ～818 nm and thickness of ～195 nm. The microwell array‐mediated delivery of lipoplexes containing FAM‐oligodeoxynucleotides is ～18.6 and ～10.6 times more efficient than the conventional transfection method in an adherent cell line (A549 non‐small cell lung cancer cells) and a suspension cell line (KG‐1a acute myelogenous leukemia cells), respectively. MicroRNA‐29b is then used as a model nucleic acid to investigate the therapeutic efficacy of lipoplexes delivered by the microwell array. Compared to conventional transfection methods, the effective therapeutic dosage of microRNA‐29b is reduced from the microgram level to the nanogram level by lipoplexes prepared in the microwell array. The microwell array is also a very flexible platform. Both nucleic acid therapeutics and imaging reagents are incorporated in lipoplexes and successfully delivered to A549 cells, demonstrating its potential applications in theranostic medicine.