Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

烧结成品运输自动控制系统的改进

对烧结成品运输自控系统不稳定性因素进行了分析，提出了采取优化硬件外围工作环境，完善软件保护程序等改进措施。改进后的自控系统稳定性明显提高。     

Technology for testing nondeterministic client/server database applications

The execution of a client/server application involving database access requires a sequence of database transaction events (or, T-events), called a transaction sequence (or, T-sequence). A client/server database application may have nondeterministic behavior in that multiple executions thereof with the same input may produce different T-sequences. We present a framework for testing all possible T-sequences of a client/server database application. We first show how to define a T-sequence in order to provide sufficient information to detect race conditions between T-events. Second, we design algorithms to change the outcomes of race conditions in order to derive race variants, which are prefixes of other T-sequences. Third, we develop a prefix-based replay technique for race variants derived from T-sequences. We prove that our framework can derive all the possible T-sequences in cases where every execution of the application terminates. A formal proof and an analysis of the proposed framework are given. We describe a prototype implementation of the framework and present experimental results obtained from it.     

相控阵AEW雷达杂波抑制的辅助通道方法研究

本文分析了相控阵机载预警(AEW)雷达杂波抑制的现有两种辅助通道降维技术(Klemm方法和简化方法)的性能，并提出了一种新的辅助通道方法。新方法的基本思想为：根据待处理距离段内各距离单元杂波能量在波束一多普勒域分布的统计特征自适应地选取辅助通道，使所选辅助通道实时地逼近杂波子空间，从而有效抑制杂波。本文方法不但可以用于非正侧视阵情况，而且误差鲁棒性好。计算机仿真结果证实了其有效性。     

Blends of nylon 6 with an ethylene-based multifunctional polymer. I. Rheology–structure relationships

An experimental study was conducted to investigate the rheological behavior of a heterogeneous polymer blend system consisting of nylon 6 and an ethylene-based multifunctional polymer (CXA 3101, DuPont Co.). For comparison purposes, we also investigated the rheological behavior of two additional blend systems, namely blends of nylon 6 with a chemically modified polyolefin (Plexar 3, Chemplex Co.) and blends of nylon 6 with ethylene–vinyl acetate copolymer (EVA). We have investigated the thermal and thermomechanical behavior of the blend systems, using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Also, we have attempted to identify the chemical structure of the functional groups present in the CXA 3101 and Plexar 3 resins, using infrared (IR) spectroscopy. This information has enabled us to interpret the observed rheological behavior. Furthermore, we have used both optical and scanning electron microscopies to investigate the state of dispersion of the constituent components in each of the blend systems. We have concluded that, during melt blending, chemical reactions have taken place between carboxyl or anhydride groups present in the CXA 3101 resin and the amino end groups of the nylon 6, forming a graft copolymer which then acted as an “interfacial agent.”     

Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion

Aluminum has been deformed by equal channel angular extrusion (ECAE) to obtain submicron-grained structures under different deformation routes. The deformation routes were varied by rotating billets through 0, 90, and 180 deg between each extrusion pass, and were designated as route A, B_C, and C, respectively. Based on quantitative microstructural analysis, the effectiveness of the deformation route is shown to depend upon the different definition used. The order of effectiveness is (a) A > B_C > C for both 90 and 120 deg dies, in terms of the generation of high-angle grain boundaries (HAGBs); (b) B_C > C > A for both 90 and 120 deg dies, in terms of the formation of equiaxed shape of grains; and (c) B_C > A > C for 90 deg die and B_C ∼ A > C for 120 die, in terms of reducing grain size. It is suggested that the generation of HAGBs can be related to the accumulation of nonredundant strain, while the shape and orientation of grains may be linked to the shearing patterns of the deformation route.     

溶胶-凝胶法制备Li（MoO4）2：Eu及表征

用溶胶-凝胶法制备了平均粒径为2～3μm的小颗粒、高亮度的Li（2-x）（MoO4）2：Eu系列钼酸盐红色荧光体。用XRD、SEM、粒度分析和分子荧光光度计对荧光体进行了表征和研究。常规的固相反应合成Li（2-x）（MoO4）2：Eux系列红色荧光粉需要在900℃以上的高温才能够形成均一的固溶体，而采用溶胶-凝胶法制取，在700℃就可以形成均一的单相Li（2-x）（MoO4）2：Eux，在750℃就可得到发光亮度最高的荧光体。其亮度是常规固相反应于900℃制得的荧光体的124％。采用溶胶-凝胶法制取Li（2-x）（MoO4）2：Eux系列，可以在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体，具有良好的颗粒形貌。     

Approach for Overcoming Numerical Inaccuracy Caused by Load Discontinuity

It was found that the discontinuity at the end of an impulse will lead to numerical inaccuracy as this discontinuity will result in an extra impulse and thus an extra displacement in the time history analysis. In addition, this extra impulse is proportional to the discontinuity value at the end of the impulse and the size of integration time step. To overcome this difficulty, an effective approach is proposed to reduce the extra impulse and hence the extra displacement. In fact, the novel approach proposed in this paper is to perform a single small time step immediately upon the termination of applied impulse, whereas other time steps can be conducted by using the step size determined from accuracy consideration in period. The feasibility of this approach is analytically explored. Further, analytical results are confirmed by numerical examples. Numerical studies also show that this approach can be applied to other step-by-step integration methods. It seems that to slightly complicate the programming of dynamic analysis codes is the only disadvantage of this approach.     

四川马海毛钢花呢的试制

根据四川马海毛原料资源的品质特性，运用精纺粗做的方法，成功地试制出手感滑糯而富有弹性、光泽明亮悦目，各项物理指标符合FZ/T24002-93标准的四川马海毛纯毛钢花呢，达到了马海毛产品的特殊风格。同时指出四川马海毛制成率偏低。